Free Access
Issue
Metall. Res. Technol.
Volume 117, Number 1, 2020
Article Number 107
Number of page(s) 8
DOI https://doi.org/10.1051/metal/2019070
Published online 27 January 2020
  1. T. Akasawa, H. Sakurai, M. Nakamura, T. Tanaka, K. Takano, Effects of free-cutting additives on the machinability of austenitic stainless steels[J], J. Mater. Process. Technol. 143-144(SI), 66–71 (2003) [CrossRef] [Google Scholar]
  2. H.-L. Wu, Y. Huang, Z. Huang, G.-J. Cheng, Experimental research on the abrasive belt grinding turbine blades material 1Cr13 stainless steel[J], Key Eng. Mater. 487(1), 452–456 (2011) [Google Scholar]
  3. K.S. Atwal, A. Reeder, T.J. Pike, Product characteristics and machinability of bloomcast free-cutting steels[J], Revue de metallurgie : Cahiers d’informations techniques 86(6), 531–542 (1989) [CrossRef] [Google Scholar]
  4. G. Domizzi, G. Anteri, J. Ovejero, Influence of sulphur content and inclusion distribution on the hydrogen induced blister cracking in pressure vessel and pipeline steels[J], Corros. Sci. 43(2), 325–339 (2001) [Google Scholar]
  5. K. Kawakami, T. Tsuyoshi, N. Kunihiko, Generation mechanisms of non-metallic inclusions in high-clean liness steel[J], ISIJ. 93(12), 743–752 (2007) [Google Scholar]
  6. W.-H. Yuan, F. Wang, Present research status and prospects on free cutting steel at home and abroad [J], Res. Iron Steel 36(5), 56–62 (2008) [Google Scholar]
  7. Y.-M. Li, F.-X. Zhu, F.-P. Cui, K. Fang, Analysis of forming mechanism of lamination defect of steel plate[J], J. Northeast. Univ.: Nat. Sci. 28(7), 1002–1005 (2007) [Google Scholar]
  8. A. Segal, J.-A. Charles, Influence of particle size on deformation characteristics of manganese sulphide inclusions in steel[J], Met. Technol. 4(1), 177–182 (1977) [CrossRef] [Google Scholar]
  9. S. Ueda, Y. Matsuki, K. Morita, Experimental evaluation of thermodynamic interactions between tellurium and various elements in molten iron[M], in: Applications of process engineering principles in materials processing, energy and environmental technologies, Springer International Publishing, 2017, pp. 485–493 [CrossRef] [Google Scholar]
  10. E. Costa, N. Luiz, M. Silva, et al., Influence of tellurium addition on drilling of microalloyed steel (DIN 38MnS6)[J], Ind. Lubr. Tribol. 63(6), 420–426 (2011) [CrossRef] [Google Scholar]
  11. L. Zheng, A. Malfliet, P. Wollants, et al., Effect of surfactant Te on the formation of MnS inclusions in steel[J], Metall. Mater. Trans. B 48(5), 2447–2458 (2017) [CrossRef] [Google Scholar]
  12. H. Yaguchi, N. Onodera, Effect of tellurium on the machinability of AISI 12L14 + Te steel[J], Trans. ISIJ. 28(12), 1051–1059 (1988) [CrossRef] [Google Scholar]
  13. S. Ueda, K. Morita, Thermodynamics on the composition and morphology control of MnS–MnTe inclusions[R], in: 171th ISIJ Meeting, 2016 [Google Scholar]
  14. K. Oikawa, H. Ohtani, K. Ishida, T. Nishizawa, The control of the morphology of MnS inclusions in steel during solidification[J], ISIJ. Int. 35(4), 402–408 (1995) [CrossRef] [Google Scholar]
  15. P. Shen, Q.K. Yang, D. Zhang, Y.X. Wu, J.X. Fu, Application of tellurium in free-cutting steels[J], J. Iron Steel Res. Int. 25(8), 787–795 (2018) [CrossRef] [Google Scholar]
  16. O. Kazumi, N. Kiyoshi, Y. Osamu, Effects of selenium and tellurium on the surface tension of molten iron and the wettability of alumina by molten iron [J], ISIJ. 66(2), 179–185 (1980) [Google Scholar]
  17. T.Y. Tien, L.H. Van Vlack, R.J. Martin, The system MnTe-MnS: Progress report[R], University of Michigan, New York, USA, 1967 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.