Free Access
Issue
Metall. Res. Technol.
Volume 117, Number 2, 2020
Article Number 210
Number of page(s) 12
DOI https://doi.org/10.1051/metal/2020020
Published online 24 April 2020
  1. S. Kapil, P. Eberhard, S.K. Dwivedy, Nonlinear dynamic analysis of a parametrically excited cold rolling mill, J. Manuf. Sci. Eng. 136(4), 4–12 (2014) [Google Scholar]
  2. R.C. Zhang, Z.K. Cheng, F.B. Wang, Study on the mechanism of horizontal nonlinear parametric vibration of single-roll driving mill, J. Vib. Shock 29(6), 105–108 (2010) [Google Scholar]
  3. X.Q. Yan, H. Wang, J. Zhou, et al., Important progress of coupling vibration inhibition on modern tandem mill, China Metall. 24(4), 1–4 (2014) [Google Scholar]
  4. T. Wang, S. Li, Z.K. Ren, et al., A novel approach for preparing Cu/Al laminated composite based on corrugated roll, Mater. Lett. 234, 79–82 (2019) [Google Scholar]
  5. I. Yarita, K. Furukawa, Y. Seino, Analysis of chattering in cold rolling for ultrathin gauge steel strip, Trans. ISIJ 18(1), 1–10 (1978) [CrossRef] [Google Scholar]
  6. T. Tamiya, K. Furui, H. Lidai, et al., Analysis of chattering phenomenon in cold rolling, in: Proceedings of science and technology of flat rolled products, International Conference on Steel Rolling, Tokyo, 1980, Vol. 2, pp. 1191–1202 [Google Scholar]
  7. J. Tlusty, S. Critchley, D. Paton, et al., Chatter in cold rolling, Ann. CIRP 31(1), 195–199 (1982) [CrossRef] [Google Scholar]
  8. I.S. Yun, R.D. Wilsonw, K.F. Ehmann, Chatter in the strip rolling process, Part I: Dynamic model of rolling, J. Manuf. Sci. Eng. 120(2), 330–336 (1998) [Google Scholar]
  9. P.H. Hu, K.F. Ehmann, A dynamic model of the rolling process. Part I: Homogeneous model, Int. J. Mach. Tools Manuf. 40(1), 1–19 (2000) [Google Scholar]
  10. P.H. Hu, K.F. Ehmann, Fifth octave mode chatter in rolling, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 1, 797–809 (2001) [CrossRef] [Google Scholar]
  11. R.E. Johnson, Q. Qi, Chatter dynamics in sheet rolling, Int. J. Mech. Sci. 36(7), 617–630 (1994) [CrossRef] [Google Scholar]
  12. A. Switoniowski, Interdependence between rolling mill vibrations and the plastic deformation process, J. Mater. Process. Technol. 61(4), 354–364 (1996) [CrossRef] [Google Scholar]
  13. O. Pawelski, W. Rasp, K. Friedewald, Chattering in cold rolling-theory of interaction of plastic and elastic deformation, in: Proceeding of 4th International Steel Rolling Conference, The Science and Technology of Flat Rolling, Deauville, France, 1987, Vol. 2 E(11), pp. 1–5 [Google Scholar]
  14. Y. Kimura, N. Fujita, Y. Matsubara, et al., High-speed rolling by hybrid-lubrication system in tandem cold rolling mills, J. Mater. Process. Technol. 216(1), 357–368 (2015) [CrossRef] [Google Scholar]
  15. M. Wehr, S. Stockert, D. Abel, et al., Rapid control prototyping in cold rolling using piezoelectric actuators, IFAC-PapersOnLine 49(31), 55–60 (2016) [CrossRef] [Google Scholar]
  16. M.A. Younes, M. Shahtout, M.N. Damir, A parameters design approach to improve product quality and equipment performance in hot rolling, J. Mater. Process. Technol. 171(1), 83–92 (2006) [CrossRef] [Google Scholar]
  17. V. Panjkovi, R. Gloss, J. Steward, et al., Causes of chatter in a hot strip mill: Observations, qualitative analyses and mathematical modelling, J. Mater. Process. Technol. 212(4), 954–961 (2012) [CrossRef] [Google Scholar]
  18. D.X. Hou, Y. Zhu, H.R. Liu, et al., Research on nonlinear vibration characteristics of cold rolling mill based on dynamic rolling force, J. Mech. Eng. 49(14), 45–50 (2013) [CrossRef] [Google Scholar]
  19. K. Pyragas, Control of chaos via extended delay feedback, Phys. Lett. A 206(5), 323–330 (1995) [Google Scholar]
  20. P. Yu, Y. Yuan, J. Xu, Study of double Hopf bifurcation and chaos for an oscillator with time delayed feedback, Commun. Nonlinear Sci. Numer. Simul. 7, 69–91 (2002) [Google Scholar]
  21. A. Maccari, Vibration control for the primary resonance of the van der pol oscillator by a time delay state feedback, Int. J. Non-Linear Mech. 38(1), 128–131 (2003) [Google Scholar]
  22. X. Li, Study on time delay feed back control and vibration performance of rolling mill’s main drive coupling system, Yanshan University, Hebei, 2013 [Google Scholar]
  23. P.M. Shi, B. Liu, S. Liu, Stability and approximate solution of a relative-rotation nonlinear dynamical system under harmonic excitation, Acta Phys. Sin. 57(8), 4675–4683 (2008) [Google Scholar]
  24. Y.Z. Liu, L.Q. Chen, Nonlinear vibrations, Higher Education Press, Beijing, 2001 [Google Scholar]
  25. X. Yang, J.Y. Li, C.N. Tong, Nonlinear vibration modeling and stability analysis of vertical roll system of cold rolling mill, J. Vib. Meas. Diagn. 33(2), 302–306 (2013) [Google Scholar]
  26. B. Liu, H.X. Zhao, Y. Zhu, et al., Two degree of freedom vertical vibration characteristics of cold rolling mill based on dynamic rolling force, China Mech. Eng. 25(17), 2344–2350 (2014) [Google Scholar]
  27. D.X. Hou, H. Chen, B. Liu, et al., Research on parametrically excited nonlinear vertical vibration of roller system system in rolling mills, J. Vib. Shock 28(11), 1–5 (2009) [Google Scholar]
  28. J.S. Tang, W.B. Fu, C.Z. Qian, Bifurcation control in nonlinear systems, Science Press, Beijing, 2016 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.