Research on coherent jet oxygen lance in BOF steelmaking process
Metall. Res. Technol., 116 5 (2019) 502
Published online: 2019-07-03
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Evaluation of Multi-hole Supersonic Oxygen Jets Behaviors with Combustion in a BOF Converter: Toward a Numerical Simulation
Yu Zhang, Guoqing Chen, Qiang Yue and Xiaobin ZhouMetallurgical and Materials Transactions B 56 (5) 4619 (2025)
https://doi.org/10.1007/s11663-025-03568-x
Study of the influence of the composite-type nozzle design on the gas-dynamic characteristics of a gas jet
Tetiana Golub, Lavr Molchanov, Oleksandr Minai and Andrii KoveriaCanadian Metallurgical Quarterly 1 (2025)
https://doi.org/10.1080/00084433.2025.2573538
Numerical study of the gas flow characteristics formed by composite nozzles under oxygen blowing conditions
Tetiana Golub, Lavr Molchanov, Oleksandr Minai and Andrii KoveriaPhysics of Fluids 37 (12) (2025)
https://doi.org/10.1063/5.0301133
Industrial-scale study on converter molten bath dynamics and oxygen footprint evolution with oxygen lance nozzle wear
Junnan Li, Kun Liu, Jian Wang, Peng Han, Zhijun He, Yongwen Fan and Lianghua FengCanadian Metallurgical Quarterly 1 (2025)
https://doi.org/10.1080/00084433.2025.2581926
Effect of Oxygen Lance Copper Tip Position Management on Corrosion of MgO–C Refractory Lining in Basic Oxygen Furnace During Campaign
Jaroslav Demeter, Branislav Buľko, Peter Demeter, Martina Hrubovčáková and Dáša ChudíkováApplied Sciences 15 (9) 5109 (2025)
https://doi.org/10.3390/app15095109
Design of a new oxygen lance to improve molten pool multi-phase flow characteristics with optimization based on numerical simulations
Haowei Yan, Jun Chen, Chao Li, Xiaoli Su, Pengyue Guo, Xizhong An and Hao ZhangAdvanced Powder Technology 36 (6) 104896 (2025)
https://doi.org/10.1016/j.apt.2025.104896
183 (2024)
https://doi.org/10.1016/B978-0-323-85373-6.00008-9
Effect of Furnace Lining Structure on the Flow Field in the 35t Top-blowing Converter Steelmaking Process
Fuhai Liu, Run Mou, Rong Zhu, Chen Sun, Kai Dong, Guangsheng Wei, Xing Du and Yu ChenISIJ International 64 (9) 1384 (2024)
https://doi.org/10.2355/isijinternational.ISIJINT-2023-468
Flow Field of Supersonic Oxygen Jet Generated by Various Wear Lengths at the Laval Nozzle Exit
Fuhai Liu, Songchao Lu, Sibao Zeng, Rong Zhu, Guangsheng Wei and Kai DongCoatings 14 (11) 1444 (2024)
https://doi.org/10.3390/coatings14111444
Variation in Multiphase Flow Characteristics by Single-Flow Post-combustion Oxygen Lance Blowing in BOF Steelmaking
Chao Liu, Shu-Guo Zheng and Miao-Yong ZhuMetallurgical and Materials Transactions B 54 (3) 1245 (2023)
https://doi.org/10.1007/s11663-023-02757-w
Study on jet characteristics of a dual-structure converter oxygen lance based on hydrodynamics
Hongbin Jia, Yanxin Li, Kun Liu and Lianghua FengAIP Advances 12 (7) (2022)
https://doi.org/10.1063/5.0091437
Variation in Multiphase Flow Characteristics by Nozzle‐Twisted Lance Blowing in Converter Steelmaking Process
Ming Lv, Hang Li, Xiangdong Xing, Tengchang Lin, Shaoyan Hu and Kun Xiesteel research international 93 (2) (2022)
https://doi.org/10.1002/srin.202100409
Research Progress on Injection Technology in Converter Steelmaking Process
Ming Lv, Shuangping Chen, Lingzhi Yang and Guangsheng WeiMetals 12 (11) 1918 (2022)
https://doi.org/10.3390/met12111918
Supersonic jet characteristics of two parameter oxygen lance nozzle
Chao Feng, Tao Xia, Guangsheng Wei, et al.Ironmaking & Steelmaking 49 (1) 109 (2022)
https://doi.org/10.1080/03019233.2021.1968261
Behavior of Top-Blown Jet under a New Cyclone Oxygen Lance during BOF Steelmaking Process
Jun Li, Zheng Ma, Chaoyun Chen, Jieyu Zhang and Bo WangProcesses 10 (3) 507 (2022)
https://doi.org/10.3390/pr10030507
Jet characteristics of a double-structure oxygen lance and its interaction with the molten pool in BOF steelmaking
Hongbin Jia, Peng Han, Kun Liu, Yanxin Li, Kaijie Ba and Lianghua FengAIP Advances 11 (8) (2021)
https://doi.org/10.1063/5.0059583
Turbulence Calculations of a Dual-Structure Oxygen Lance for Converter Based on Hydrodynamics
Hongbin Jia, Yanxin Li, Peng Han, et al.Mathematical Problems in Engineering 2021 1 (2021)
https://doi.org/10.1155/2021/5785889
Effect of powder injection rate on the flow field of coherent lime powder injection (C-LPI) for EAF steelmaking
Guangsheng Wei, Rong Zhu, Chao Feng, Lingzhi Yang and Kai DongIronmaking & Steelmaking 48 (5) 534 (2021)
https://doi.org/10.1080/03019233.2020.1816805
Effect of a self-rotating oxygen lance system on mass transfer between slag and molten steel
Qi Gao, Wei Wu, Jian-guo Zhi, Bo Zhang and Xiang-chen LiJournal of Iron and Steel Research International 28 (2) 152 (2021)
https://doi.org/10.1007/s42243-020-00515-9
Behavior of Gas–Slag–Metal Emulsion with Nozzle‐Twisted Lance in Converter Steelmaking Process
Ming Lv, Hang Li, Tengchang Lin, Kun Xie and Kui Xuesteel research international 92 (10) (2021)
https://doi.org/10.1002/srin.202100103
Metallurgical performance of innovative double-parameter oxygen lance in BOF steelmaking
Guangqiang Liu, Kun Liu and Peng HanIronmaking & Steelmaking 48 (4) 437 (2021)
https://doi.org/10.1080/03019233.2020.1806677
Jet characteristics of CO2–O2 mixed injection using a dual-parameter oxygen lance nozzle for different smelting periods
Chao Feng, Rong Zhu, Guangsheng Wei, Jianfeng Dong and Kai DongHigh Temperature Materials and Processes 40 (1) 345 (2021)
https://doi.org/10.1515/htmp-2021-0035
Simulation and analysis of O2–CaO jet behavior with different shrouding fuel mediums in electric arc furnace steelmaking
Bing-long Zhang, Guang-sheng Wei, Run-zao Liu, Rong Zhu and Rong-fang SuJournal of Iron and Steel Research International 27 (11) 1259 (2020)
https://doi.org/10.1007/s42243-020-00481-2
Development of welded structure of 5-nozzle lance heads in converter shop of PJSC “Dneprovsky metallurgical combine”
S. P. PanteikovIzvestiya. Ferrous Metallurgy 63 (10) 815 (2020)
https://doi.org/10.17073/0368-0797-2020-10-815-822
Stages of Improvement for Welded Structures with Five-Nozzle Lance Heads in the Converter Shop of Public Joint Stock Company “Dneprovsky Metallurgical Combine”
S. P. PanteikovSteel in Translation 50 (11) 756 (2020)
https://doi.org/10.3103/S0967091220110108
Carbon Powder Mixed Injection with a Shrouding Supersonic Oxygen Jet in Electric Arc Furnace Steelmaking
Guangsheng Wei, Rong Zhu, Shufeng Yang, et al.Metallurgical and Materials Transactions B 51 (5) 2298 (2020)
https://doi.org/10.1007/s11663-020-01920-x
Simulation and Application of Submerged CO2-O2 Injection in Electric Arc Furnace Steelmaking: Modeling and Arrangement of Submerged nozzles
Guangsheng Wei, Rong Zhu, Baochen Han, et al.Metallurgical and Materials Transactions B 51 (3) 1101 (2020)
https://doi.org/10.1007/s11663-020-01816-w
Optimized Scheme for Accelerating the Slagging Reaction and Slag–Metal–Gas Emulsification in a Basic Oxygen Furnace
Zichao Yin, Jianfei Lu, Lin Li, Tong Wang, Ronghui Wang, Xinghua Fan, Houkai Lin, Yuanshun Huang and Dapeng TanApplied Sciences 10 (15) 5101 (2020)
https://doi.org/10.3390/app10155101