Influence of torch oscillation on the microstructure of Colmonoy 6 overlay deposition on SS304 substrate with PTA welding process
Metall. Res. Technol., 118 4 (2021) 406
Published online: 2021-06-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Electrophoretic deposition of graphene coating on copper for improved thermoelectric performance of wire rods
Gabriele Baiocco, Silvio Genna, Daniel Salvi and Nadia UcciardelloThe International Journal of Advanced Manufacturing Technology 133 (11-12) 5761 (2024)
https://doi.org/10.1007/s00170-024-14042-4
Sustainable coating solutions: a comparative life cycle analysis of electrophoretic deposition and electroplating for graphene-reinforced anti-wear coatings
Gabriele Baiocco, Daniel Salvi and Nadia UcciardelloThe International Journal of Advanced Manufacturing Technology 130 (7-8) 3341 (2024)
https://doi.org/10.1007/s00170-023-12796-x
Investigation of electrostatic-assisted ultrasonic atomization and spraying
Yue Yang, Songmei Yuan, Zikang Zhang and Tie LuThe International Journal of Advanced Manufacturing Technology 130 (11-12) 6059 (2024)
https://doi.org/10.1007/s00170-023-12912-x
An investigation of the mechanical characteristics of BH 340 gas metal arc welded joints using digital image correlation technique and regression analysis
Dawei Zhao, Kirill Guseinov and Nikita VdoninThe International Journal of Advanced Manufacturing Technology 130 (11-12) 5935 (2024)
https://doi.org/10.1007/s00170-024-13086-w
Numerical simulation and experiment research on forming of hollow blade with 304 stainless steels and Ti–6Al–4V tubes by sand mandrel
Yuan Zhuang, Hongyu Wang, Menghan Liu and Yuanyuan LiJournal of the Brazilian Society of Mechanical Sciences and Engineering 46 (5) (2024)
https://doi.org/10.1007/s40430-024-04841-x
The effect of weld heat input on the microstructure and mechanical properties of wire arc additively manufactured 15-5PH stainless steel
J Iain Sword, Alexander Galloway and Athanasios ToumpisThe International Journal of Advanced Manufacturing Technology 132 (11-12) 5305 (2024)
https://doi.org/10.1007/s00170-024-13674-w
Electrical, microstructural, and mechanical behavior of HSLA X70 pipeline welded by GMAW and FCAW processes
Omar Fethi Benaouda, Ahmed Kellai, Mohamed Elbar, Mohamed Farid Benlamnouar and Tahar BenmessaoudThe International Journal of Advanced Manufacturing Technology 133 (3-4) 1761 (2024)
https://doi.org/10.1007/s00170-024-13859-3
Three-dimensional numerical simulation of magnetically confined plasma cutting arc
Xiaoguang Liu, Zhenmin Wang, Jing Wu and Jiyu TianThe International Journal of Advanced Manufacturing Technology 133 (5-6) 2419 (2024)
https://doi.org/10.1007/s00170-024-13828-w
Microstructural evolution and mechanical behavior of activated tungsten inert gas welded joint between P91 steel and Incoloy 800HT
Vishwa Bhanu, J. Manoj, Ankur Gupta, Dariusz Fydrych and Chandan PandeyThe International Journal of Advanced Manufacturing Technology 134 (1-2) 223 (2024)
https://doi.org/10.1007/s00170-024-14117-2
Effect of Powder Feed Rate on the Structure and Properties of Plasma Deposited Stellite 6 Cladding on SS316L Stainless Steel Substrate
Avishkar Bhoskar and Vivek KalyankarMetal Science and Heat Treatment 65 (11-12) 691 (2024)
https://doi.org/10.1007/s11041-024-00991-w
Effect of heat input on mechanical performance and corrosion behaviors of local dry underwater pulsed MIG SUS304 weldments
Zhenmin Wang, Bin Zhang, Haipeng Liao, Xiangmiao Wu, Jiyu Tian and Qin ZhangThe International Journal of Advanced Manufacturing Technology 131 (3-4) 1645 (2024)
https://doi.org/10.1007/s00170-024-13191-w
Exploring the trends in flux-cored arc welding: scientometric analysis approach
Aleksandra Świerczyńska, Balázs Varbai, Chandan Pandey and Dariusz FydrychThe International Journal of Advanced Manufacturing Technology 130 (1-2) 87 (2024)
https://doi.org/10.1007/s00170-023-12682-6
Optimization of weld penetration prediction based on weld pool image and deep learning approach in gas tungsten arc welding
Daehyun Baek, Hyeong Soon Moon and Sang-Hu ParkThe International Journal of Advanced Manufacturing Technology 130 (5-6) 2617 (2024)
https://doi.org/10.1007/s00170-023-12855-3
High-entropy alloy coating deposition by detonation spraying combined with heat treatment
Igor Batraev, Dina V. Dudina, Denis K. Rybin, Vladimir Yu. Ulianitsky, Alexey Sova, Ahmad Ostovari Moghaddam, Maria Doubenskaia, Evgeny Trofimov and Marina SamodurovaThe International Journal of Advanced Manufacturing Technology 129 (5-6) 2647 (2023)
https://doi.org/10.1007/s00170-023-12464-0
Metallurgical characterisation of multi-track Stellite 6 coating on SS316L substrate
Avishkar Bhoskar, Vivek Kalyankar and Dhiraj DeshmukhCanadian Metallurgical Quarterly 62 (4) 665 (2023)
https://doi.org/10.1080/00084433.2022.2149009
Study on the heat input regulation mechanism of compound excitation device and its influence on arc shape and penetration behavior in GTAW
Wei Zhou, Jianfeng Yue, Pu Zhong, Haojie Chen and Hao ZhouThe International Journal of Advanced Manufacturing Technology 129 (7-8) 3269 (2023)
https://doi.org/10.1007/s00170-023-12479-7
Welding fault detection and diagnosis using one-class SVM with distance substitution kernels and random convolutional kernel transform
Abdallah Amine Melakhsou, Mireille Batton-Hubert and Nicolas CasoettoThe International Journal of Advanced Manufacturing Technology 128 (1-2) 459 (2023)
https://doi.org/10.1007/s00170-023-11768-5
Inter-relationship between residual stresses, microstructural evolutions, and mechanical responses of heat-treatable aluminum alloys during welding: a numerical and experimental study
Ardeshir Sarmast and Siamak SerajzadehThe International Journal of Advanced Manufacturing Technology 129 (9-10) 4383 (2023)
https://doi.org/10.1007/s00170-023-12612-6
Infrared in-line monitoring of flaws in steel welded joints: a preliminary approach with SMAW and GMAW processes
Luca Santoro, Raffaella Sesana, Rosario Molica Nardo and Francesca CuráThe International Journal of Advanced Manufacturing Technology 128 (5-6) 2655 (2023)
https://doi.org/10.1007/s00170-023-12044-2
On the performance of metallurgical behaviour of Stellite 6 cladding deposited on SS316L substrate with PTAW process
Vivek Kalyankar, Avishkar Bhoskar, Dhiraj Deshmukh and Sanjay PatilCanadian Metallurgical Quarterly 61 (2) 130 (2022)
https://doi.org/10.1080/00084433.2022.2031681
Preparation of high wear resistance nickel based WC coating by carefully adjusting interface structure
Lei Fan, Peng Ou, Ju Rong and Xiaohua YuMaterials Research Express 9 (8) 086402 (2022)
https://doi.org/10.1088/2053-1591/ac86ba