Subscriber Authentication Point

EDPS Account

Topical Issues

Metallurgical Research & Technology

Special Issue on ‘Advances in Powder Technologies: Highlights from EuroPM2025’, edited by Efrain Carreño-Morelli, Elena Gordo and Lars Nyborg

Export the citation of the selected articles Export
Select all

Open Access

Short-loop recycling of elevator motor magnets by hydrogen decrepitation and FAST sintering

Miguel Lagos, Blanca Luna Checa Fernández, Iñaki Leizaola, Jon Mikel Sanchez, Iñigo Agote, Gaizka Almandoz, Javier Poza and Ana Escalada

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025075

Open Access

Optimizing grain size in PBF-LB Inconel 939: a cost-effective approach using solution annealing, HIP, and integrated heat treatments for enhanced high-temperature performance

Emilio Bassini, Giulio Marchese, Sara Biamino and Daniele Ugues

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025077

Open Access

Development of Al2024-TiB₂ powder mixtures processable by PBF-LB/M for high demanding applications

Raúl Gomez, Álvaro Pérez, Maria San Sebastian and Ane Miren Mancisidor

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025078

Open Access

Assessment of microchannel architectures accuracy in stainless steel 316L/red mud composite parts fabricated by binder jetting

Naiqi Shang, Marco Zago, Marco Mariani, Gianluca Dall’Osto, Nora Lecis, Vigilio Fontanari, Ilaria Cristofolini and Davide Mombelli

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025079

Open Access

New FKM guideline on the analytical strength assessment of components made of sintered steels

Jörg Baumgartner, Karl Burkamp, Tobias Hajeck and Felix Reissner

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025081

The influence of recycling metal powder in the gas atomization process on the produced powder’s chemical composition

Sofia Kazi, Teodor Haglund, Björn-Olof Bengtsson and Eduard Hryha

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025082

Sustainable manufacturing of Fe-Co electric steel sheets via additive screen printing

Inge Lindemann, Joshua J. Anbudass, Kay Reuter, Merlin Thamm, Bruno Weise, Thomas Studnitzky and Thomas Weißgärber

Published online: 16 September 2025

DOI: https://doi.org/10.1051/metal/2025087

Open Access

Kirkendall pore formation within WC-Co tool inserts during the machining of titanium alloys

Alexander Graves, Rebecka Lindvall, Cornelis Botermans, Martin Jackson, Volodymyr Bushlya and Susanne Norgren

Published online: 01 October 2025

DOI: https://doi.org/10.1051/metal/2025080