Original Article

Influence of Si contents on the microstructure and corrosion resistance of the Zn−Al−Mg−Si alloys

Shougang Research Institute of Technology, Shougang Group Co., Ltd., Beijing, 100043 China

^* e-mail: liuguanghui17@sina.com
^** e-mail: tenghuaxiang@shougang.com.cn

Received: 18 August 2023
Accepted: 12 December 2023

Abstract

Hot dip galvanized products are widely used in various aspects of production and life due to their excellent corrosion resistance. Some studies have added a fourth trace alloying element to the zinc aluminum magnesium coating to form a quaternary alloy for better performance. This article prepared two different types of Zn−Al−Mg alloy ingots with trace amounts of Si added by induction melting, consisting of Zn1Al1Mg0.01Si and Zn1Al1Mg0.05Si, and solidified them in a heating furnace with argon gas protection atmosphere. The precipitation process of Zn1Al1Mg(0.01,0.05)Si alloy components under non equilibrium and equilibrium solidification conditions was calculated. The initial crystalline phase of the alloy and the initial solidification temperature were predicted through phase diagram calculations. The microstructure and phase types of the alloy were analyzed using scanning electron microscopy (SEM) and field emission scanning electron microscopy (FE-SEM). The electrochemical Tafel curves of Zn1Al1Mg(0.01,0.05)Si with different Si contents showed that the Zn1Al1Mg0.05Si has the highest corrosion potential and Zn1Al1Mg0.01Si has the lowest corrosion current which means the 1Al1Mg0.01Si alloy possesses the highest corrosion resistance. The Nyqust curves and bode curves also showed that the practical impedance of 1Al1Mg0.01Si alloy is higher than that of 1Al1Mg0.05Si. Moreover, electron probe X-ray micro-analyzer(EPMA) reveals the distribution of Si elements in the Zn1Al1Mg(0.01,0.05)Si. At present, there is little research on the microstructure and properties of quaternary alloys containing silicon. Therefore, studying the influence of silicon content on the microstructure and properties of alloys is of great significance.