Dual-driven predictive model for wear mechanism of work rolls in thin slab casting and rolling production line
Metall. Res. Technol., 122 6 (2025) 619
Published online: 05 November 2025
Metallurgical Research & Technology
Formerly Revue de Métallurgie
-
-
Prediction of blast furnace gas utilization rate based on genetic algorithm-optimized GA-ARIMA model
Metall. Res. Technol., 122 6 (2025) 620Published online: 03 November 2025 -
Multi-response optimization of wire-EDM parameters for austempered ductile iron using RSM and desirability function analysis
Metall. Res. Technol., 122 6 (2025) 622Published online: 03 November 2025 -
Mechanism analysis of rare earth Y on mechanical properties of GCr15 bearing steel
Metall. Res. Technol., 122 6 (2025) 621Published online: 31 October 2025 -
Research on the microstructure and properties of low carbon steel tubes under various induction heating temperatures
Metall. Res. Technol., 122 6 (2025) 623Published online: 31 October 2025 -
Development and implementation of a mathematical model of charging a blast furnace equipped with a bell-type charging device
Metall. Res. Technol., 122 6 (2025) 624Published online: 31 October 2025 -
Microstructure and texture evolution during normalization of high-grade 3%Si non-oriented electrical steel
Metall. Res. Technol., 122 6 (2025) 618Published online: 09 October 2025 -
Effect of Ce on the transformation of inclusions in the production process of duplex stainless steel F53
Metall. Res. Technol., 122 6 (2025) 609Published online: 02 October 2025 -
Review
Review on simulation and practice of blast furnace burden distribution process
Metall. Res. Technol., 122 6 (2025) 610Published online: 02 October 2025 -
Study on jet characteristics of a new dual Mach number oxygen lance for 200t converter
Metall. Res. Technol., 122 6 (2025) 612Published online: 02 October 2025
| 202 |
Free Access
Résumé des articles techniquesRev. Met. Paris, 99 10 (2002) III-VII
Published online: 12 November 2002
|
| 108 |
Open Access
New FKM guideline on the analytical strength assessment of components made of sintered steelsMetall. Res. Technol., 122 6 (2025) 605
Published online: 16 September 2025
|
| 84 |
Free Access
The genesis of the Schaeffler diagram in the history of stainless steelMetall. Res. Technol., 114 6 (2017) 613
Published online: 13 October 2017
|
| 75 |
Open Access
Review
Corrosion of pure lead in HCl at room temperature: a reviewMetall. Res. Technol., 122 5 (2025) 510
Published online: 30 July 2025
|
| 57 |
Free Access
History of the iron furnace using the physical-chemical blast furnace modelMetall. Res. Technol., 120 1 (2023) 108
Published online: 04 January 2023
|
Recent articles (published in the past 5 years)
| 32 |
Influence of torch oscillation on the microstructure of Colmonoy 6 overlay deposition on SS304 substrate with PTA welding processMetall. Res. Technol., 118 4 (2021) 406
Published online: 22 June 2021
|
| 32 |
Effect of Ce-La on inclusion evolution in Al-killed high strength steelMetall. Res. Technol., 117 6 (2020) 616
Published online: 29 October 2020
|
| 27 |
CT scan, EBSD and nanoindentation analysis of 3D-printed parts with post-process heat-treatmentMetall. Res. Technol., 121 1 (2024) 101
Published online: 06 December 2023
|
| 23 |
Modification of sulfide by Te in Y1Cr13 free-cutting stainless steelMetall. Res. Technol., 117 1 (2020) 107
Published online: 27 January 2020
|
| 22 |
Inclusions modification and improvement of machinability in a non-quenched and tempered steel with Mg treatmentMetall. Res. Technol., 117 2 (2020) 208
Published online: 24 April 2020
|
