Issue |
Metall. Res. Technol.
Volume 121, Number 6, 2024
|
|
---|---|---|
Article Number | 607 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/metal/2024077 | |
Published online | 08 November 2024 |
Original Article
The kinetics of tungsten adsorption from acid leaching solution of scheelite by anion resin
1
Jiangxi Provincial Key Laboratory of Environmental Pollution Prevention and Control in Mining and Metallurgy, Ganzhou 341000, China
2
School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China
* e-mail: 9120190049@jxust.edu.cn
** e-mail: 1549346121@qq.com
Received:
20
April
2024
Accepted:
3
July
2024
The adsorption kinetics of tungsten from acid leaching solution of scheelite was investigated. The effects of solution pH value (3.0–9.0), anion resin dosage (1–6 g), contact time (20–180 min) and reaction temperature (20–60 °C) on the tungsten adsorption were studied. The results showed that the tungsten adsorption was practically independent of reaction temperature at the investigated range, while increasing with the increases of resin dosage and contact time, and the decreases of solution pH value. The experimental data agreed quite well with the Langmuir model, with the maximum adsorption capacities of tungsten is 347.34 mg/g at 20 °C. In addition, SEM-EDS analysis further revealed that tungsten was well adsorbed by the anion resin.
Key words: adsorption / kinetics / acid solution / tungsten / scheelite
© EDP Sciences, 2024
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.