Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20010702

• Abstract
• PDF (24.00 KB)

Journées Sidérurgiques Internationales ATS 2001 : Programme préliminaire p. 623

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20010701

• Abstract
• PDF (547.3 KB)

Start-up of a post-combustion lance at the Sollac Lorraine steel plant p. 639

J. P. Bosquet, P. Chapellier, G. Didry, C. A. Dubois, J. C. Mailhan, C. Grisvard and J. C. Huber

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001111

• Abstract
• PDF (135.5 KB)

New transformers for increasing EAF productivity and improving electrode and energy consumption p. 645

S. Alameddine, C. Driussi and J. C. Ritter

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001112

• Abstract
• PDF (161.6 KB)

Start-up and initial experience with the casting-rolling plant of Thyssen Krupp Stahl AG p. 655

C. Hendricks, W. Rasim, H. Janssen, H. Schnitzer, E. Sowka and P. Tesè

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001113

• Abstract
• PDF (877.9 KB)

Ferritic rolling in the thin slab direct rolling technology p. 667

R. Kaspar and A. Tomitz

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001114

• Abstract
• PDF (161.3 KB)

Start-up and operational performance of the HADEED hot strip mill complex p. 675

G. Thaller and J. Wagner

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001115

• Abstract
• PDF (663.0 KB)

Advanced solutions for bar and wire-rod mills p. 689

R. Fabris, O. Hein, K. Moshammer, J. Palzenberger and J. Trojacher

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001116

• Abstract
• PDF (563.2 KB)

Influence of the ratio of deformation between ferritic warm rolling and cold rolling on the properties of ULC-Ti steel for deep-drawing p. 699

E. Vasseur, H. Réglé, E. Pinto Da Costa and Y. Raulet

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001117

• Abstract
• PDF (497.8 KB)

Impact of ferritic rolling schedule on oxide scale formation, pickling rate and cost price p. 709

J.-F. Willem, P. Harlet, D. Bouquegneau and C. Hugé

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001118

• Abstract
• PDF (115.6 KB)

Continuous pickling line with the highest speed in the world, new dam-spray descaling p. 719

S. Nakatsuka, S. Yoshinaga, Y. Nawata, M. Sakuta, J. Tokushige and K. Yoshida

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2001119

• Abstract
• PDF (244.7 KB)