Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal/20030301

• Abstract
• PDF (43.65 KB)

Sun Coke Company's heat recovery cokemaking technology. High coke quality and low environmental impact p. 233

D. N. Walker Sr and M. P. Barkdoll

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003172

• Abstract
• PDF (193.8 KB)

The current development and latest achievements in cokemaking technology p. 243

H. Toll and R. Worberg

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003106

• Abstract
• PDF (213.8 KB)

Measurements of coke oven wall deflections p. 251

E. Petit, J.-P. Gaillet, N. Bastian and J.-L. Karst

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003173

• Abstract
• PDF (115.7 KB)

Greenhouse gas emissions of the steel industry - Avenues open for a responsible and sustainable management of emissions p. 261

J.-P. Birat

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003174

• Abstract
• PDF (135.1 KB)

Technologies to reduce environmental burdens. Evolutions in Europe p. 271

K. Buttiens, Y. de Lassat de Pressigny and B. de Quièvrecourt

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003175

• Abstract
• PDF (225.5 KB)

Technical and economic evolution of ironmaking in Germany over the last 50 years p. 281

K. H. Grosspietsch and H. B. Lüngen

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003176

• Abstract
• PDF (206.9 KB)

Experience with using alternative reducing agents at blast furnace p. 289

J. Buchwalder, T. Fuchs, J. Hunger and T. Siepert

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003177

• Abstract
• PDF (187.8 KB)

Current status of COREX technology and recent developments p. 297

A. Eberle, D. Siuka, C. Böhm and W. Schiffer

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003178

• Abstract
• PDF (2.337 MB)

Visual predictive maintenance tool based on SOM projection techniques p. 307

I. Díaz Blanco, A. A. Cuadrado Vega, A. Diez González, L. Rodríguez Loredo, F. Obeso Carrera and J. A. Rodríguez

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003179

• Abstract
• PDF (482.5 KB)

Roughness control of an on-line skin pass mill p. 317

T. Massart, B. Lejeune, D. Malaise and L. Broussard

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003180

• Abstract
• PDF (245.7 KB)

Modelling of the mechanical properties of austenitic stainless steel coils processed on the Ugine&ALZ integrated cold rolling line LC2i p. 325

J. D. Mithieux, C. Bruyère, J. H. Schmitt and O. Bouaziz

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003181

• Abstract
• PDF (112.3 KB)

FB 21 - The last generation of flash-butt-welders p. 333

D. Decrequy, D. Bouquegneau and P. Gobez

Published online: 23 April 2003

DOI: https://doi.org/10.1051/metal:2003167

• Abstract
• PDF (116.6 KB)