Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal/20050301

• Abstract
• PDF (49.37 KB)

Present state and innovative issues for ironmaking p. 161

J.-M. Steiler and F. Hanrot

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005139

• Abstract
• PDF (444.0 KB)

Ecological hot metal production using the coke plant and blast furnace route p. 171

P. Schmöle and H.-B. Lüngen

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005140

• Abstract
• PDF (449.6 KB)

Actions and control of the hearth of the CST blast furnace No. 2 p. 183

J.-A.-Pereira Novaes, R. da Cruz Jr, M. Correa da Silva, J. Issamu Gushiken, R.-J. Tauffer Barros and M. Azevedo de Oliveira

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005141

• Abstract
• PDF (450.3 KB)

Numerical analysis of blast furnace operations with top gas recycling p. 189

H. Nogami, M. Chu and J.-I. Yagi

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005132

• Abstract
• PDF (353.2 KB)

Blast furnace theory: the contribution of the French School p. 199

R. Nicolle

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005181

• Abstract
• PDF (1.172 MB)

New ambient air quality standard for benzo(a)pyrene and its influence on demands for emission control on coke plants p. 219

M. Hein and F. Huhn

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005133

• Abstract
• PDF (573.4 KB)

Recent improvements in Arcelor steel ladles through optimization of refractory materials, steel shell and service conditions p. 233

P. Blumenfeld, S. Peruzzi, M. Puillet and J. de Lorgeril

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005134

• Abstract
• PDF (342.3 KB)

Operational results of the DSR installed on the No. 1 tandem cold mill of Baoshan Iron and Steel p. 241

J.-F. Wang, L. Jao and J.-P. Faure

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005135

• Abstract
• PDF (499.5 KB)

VAI Steckel mill technology. Economical and flexible production of hot-rolled strip and plates p. 251

G. Thaller, G. Djumlija, W. Gruber, N. Champion and A. Marples

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005136

• Abstract
• PDF (1.477 MB)

Development of a new 12%Cr-steel for tubes and pipes in power plants with steam temperatures up to 650°C p. 263

B. Vandenberghe, B. Lefebvre, J. Gabrel and J.-C. Vaillant

Published online: 31 March 2005

DOI: https://doi.org/10.1051/metal:2005127

• Abstract
• PDF (251.0 KB)