Metallurgical Research & Technology

Effects of additives on properties of Zr₅₀Al₁₅Ni₁₀Cu₂₅ amorphous powders in low-pressure sintering 601

Woyun Long, Anxian Lu, Xueqiong Ouyang and Jing Li

Published online: 26 October 2015

DOI: https://doi.org/10.1051/metal/2015034

• Abstract
• PDF (856.6 KB)
• References

Study of the effect of the MgO/Al₂O₃ ratio on viscosity of blast furnace slag 602

Lu Yao, Shan Ren, Guoqing Liu, Qingcai Liu, Ming Kong and Jian Yang

Published online: 26 October 2015

DOI: https://doi.org/10.1051/metal/2015036

• Abstract
• PDF (942.2 KB)
• References

Data mining – new perspectives on predicting coke quality in recovery stamp charged coke making process 603

Hari Prakash Tiwari, Sujit Kumar Haldar, Abhijit Roy, Arunabh Bhattacharjee and Prakhar Mishra

Published online: 26 October 2015

DOI: https://doi.org/10.1051/metal/2015040

• Abstract
• PDF (1.080 MB)
• References

Influence of cooling conditions on the hot ductility of Nb-Ti-bearing steels 604

Xiaogang Yang, Lifeng Zhang, Shusen Li and Ming Li

Published online: 26 October 2015

DOI: https://doi.org/10.1051/metal/2015038

• Abstract
• PDF (9.577 MB)
• References

Application study of AlSi10Mg alloy by selective laser melting: physical and mechanical properties, microstructure, heat treatments and manufacturing of aluminium metallic matrix composite (MMC) 605

Arnold Mauduit, Sébastien Pillot and François Frascati

Published online: 05 November 2015

DOI: https://doi.org/10.1051/metal/2015039

• Abstract
• PDF (9.272 MB)
• References

Formation and effects of banded structures in 55SiCrA spring steel wire rod 606

Xiaofei He, Xinhua Wang, Ying Wang and Yaoqing Meng

Published online: 07 December 2015

DOI: https://doi.org/10.1051/metal/2015041

• Abstract
• PDF (3.219 MB)
• References

Corrosion of high alumina refractories by Al₂O₃-CaO slag: thermodynamic and kinetic approaches 607

Emmanuel De Bilbao, Jacques Poirier and Mathieu Dombrowski

Published online: 07 December 2015

DOI: https://doi.org/10.1051/metal/2015042

• Abstract
• PDF (2.594 MB)
• References

Characteristics of subsurface inclusions in deep-drawing steel slabs at high casting speed 608

Huixiang Yu, Xiaoxuan Deng, Xinhua Wang, Chenxi Ji and Guosen Zhu

Published online: 07 December 2015

DOI: https://doi.org/10.1051/metal/2015043

• Abstract
• PDF (2.918 MB)
• References

Upper bound solution of equal channel forward extrusion process as a new severe plastic deformation method 609

M. Ebrahimi, S. A. Nazari Tiji and F. Djavanroodi

Published online: 07 December 2015

DOI: https://doi.org/10.1051/metal/2015044

• Abstract
• PDF (811.5 KB)
• References