Metallurgical Research & Technology

Attempts to replace nut coke with semi-coke for blast furnace ironmaking 301

Qingbo Meng, Fanyu Meng, Li Zhan, Xiuli Xu, Jianglong Yu and Qi Wang

Published online: 21 April 2021

DOI: https://doi.org/10.1051/metal/2021026

Effect of CaO–SiO₂–Al₂O₃–MgO top slag on solute elements and non-metallic inclusions in Fe-xMn(x = 10, 20 mass pct) steel 302

Huixiang Yu, Dexin Yang, Muming Li and Ni Zhang

Published online: 21 April 2021

DOI: https://doi.org/10.1051/metal/2021025

Quantitative study on the relationship between the transverse thickness difference of cold-rolled silicon strip and incoming section profile based on the mechanism-intelligent model 303

Dongcheng Wang, Yanghuan Xu, Tongyuan Zhang, Xiaobao Ma and Hongmin Liu

Published online: 21 April 2021

DOI: https://doi.org/10.1051/metal/2020090

Mechanical properties and metallurgical characterization of FSPed TIG and TIG welded AA5052-H32/AA5083-H111 dissimilar aluminium alloys 304

Antony Prabu Dhanaraj and Subbaiah Kumarasamy

Published online: 21 April 2021

DOI: https://doi.org/10.1051/metal/2021005

Research on roll profile electromagnetic control ability in optimal electromagnetic stick parameter 305

Tingsong Yang, Jiayang Liu, Xinyi Ren, Yingwei Wang and Fengshan Du

Published online: 21 April 2021

DOI: https://doi.org/10.1051/metal/2021031

Influence of lithium amount on vitreous enamel properties 306

Ahmet Murat Erayvaz and Emek Moroydor Derun

Published online: 21 April 2021

DOI: https://doi.org/10.1051/metal/2021028

Effect of tool offset on microstructure and mechanical properties of dissimilar copper-brass friction stir welding 307

Hamid Reza Sadeghi, Kamran Amini and Farhad Gharavi

Published online: 29 April 2021

DOI: https://doi.org/10.1051/metal/2021029

Study on the utilization of supersaturation degree in Al deoxidation to improve cleanliness and control of Al₂O₃ inclusions in ultra-low carbon steel 308

Yun-qing Ji, Min Jiang, Xiao-xuan Deng, Chun-yang Liu, Fu-xiang Huang and Xin-hua Wang

Published online: 29 April 2021

DOI: https://doi.org/10.1051/metal/2021007

Study on the phase evolution and element migration of vanadium oxide during the nitridation process 309

Jiang Diao, Jing Lei, Yiyu Qiu, Deman Liu, Hong-Yi Li, Bing Xie and Gang Li

Published online: 07 May 2021

DOI: https://doi.org/10.1051/metal/2021027

Effect of Mg treatment on distribution of inclusions in Fe-O-Al-Mg melt 310

Yutang Li, Linzhu Wang, Junqi Li, Shufeng Yang, Chaoyi Chen, Changrong Li and Xiang Li

Published online: 07 May 2021

DOI: https://doi.org/10.1051/metal/2021030

Review

Coal macerals and their separation methodologies – A review 311

Debjani Nag, Govind Dubey, Pratik Swarup Dash and Soumya Sanjeeb Mohapatra

Published online: 07 May 2021

DOI: https://doi.org/10.1051/metal/2021023

Research on corrosion mechanism of refractory lining in drip zone of COREX melting gasifier 312

Xiaoge Wang, Pengcheng Li, Huili Sun and Shitao Song

Published online: 07 May 2021

DOI: https://doi.org/10.1051/metal/2021032

Oxidation and hot corrosion behavior of a directionally solidified W richen cobalt-based superalloy 313

Yuebo Zhou, Chenggang Mo and Hong Wang

Published online: 07 May 2021

DOI: https://doi.org/10.1051/metal/2021033

An investigation on electrical discharge metal matrix coating of ZE41A magnesium alloy 314

Uthirapathi Elaiyarasan, Vinaitheerthan Satheeshkumar and Chinnamuthu Senthilkumar

Published online: 07 May 2021

DOI: https://doi.org/10.1051/metal/2021034

The separation of ε- and γ’-phases in the plasma nitrided layer by colour etching techniques 315

Dorina Kovács and Annamária Szabó

Published online: 11 May 2021

DOI: https://doi.org/10.1051/metal/2021035

Effect of fluorine on surface tension of CaO-SiO₂-Al₂O₃-Na₂O-CaF₂ mold flux 316

Qiang Gao and Longhu Cao

Published online: 21 May 2021

DOI: https://doi.org/10.1051/metal/2021040

Sensitivity analysis, identification and validation of the dislocation density-based model for metallic materials 317

Danuta Szeliga, Natalia Czyżewska, Konrad Klimczak, Jan Kusiak, Paweł Morkisz, Piotr Oprocha, Maciej Pietrzyk and Paweł Przybyłowicz

Published online: 21 May 2021

DOI: https://doi.org/10.1051/metal/2021037

Optimizing MgO distribution between sinter and pellet based on melting behavior and interaction 318

Kaikai Bai, Yuzhu Pan, Jingsong Wang, Haibin Zuo and Qingguo Xue

Published online: 21 May 2021

DOI: https://doi.org/10.1051/metal/2021042

Study on corrosion resistance behavior and formation mechanism of Ce conversion coating on manganese 319

Sihua Lei, Fei Lu, Shuai Wang, Hong Zhong, Zhanfang Cao and Xiaoping Huang

Published online: 21 May 2021

DOI: https://doi.org/10.1051/metal/2021041

Open Access

Sandwich materials with a crumpled aluminium core 320

Olivier Bouaziz, Rabeb Bouafif and Roxanne Massion

Published online: 21 May 2021

DOI: https://doi.org/10.1051/metal/2021014

Performance analysis of hot metal temperature prediction in a blast furnace and expert suggestion system proposal using neural, statistical and fuzzy models 321

Erdoğan Bozkurt, İlhami M. Orak and Yasin Tunçkaya

Published online: 21 May 2021

DOI: https://doi.org/10.1051/metal/2021043

Metallurgical Research & Technology

Volume 118 / No 3 (2021)

Attempts to replace nut coke with semi-coke for blast furnace ironmaking 301

Effect of CaO–SiO2–Al2O3–MgO top slag on solute elements and non-metallic inclusions in Fe-xMn(x = 10, 20 mass pct) steel 302

Quantitative study on the relationship between the transverse thickness difference of cold-rolled silicon strip and incoming section profile based on the mechanism-intelligent model 303

Mechanical properties and metallurgical characterization of FSPed TIG and TIG welded AA5052-H32/AA5083-H111 dissimilar aluminium alloys 304

Research on roll profile electromagnetic control ability in optimal electromagnetic stick parameter 305

Influence of lithium amount on vitreous enamel properties 306

Effect of tool offset on microstructure and mechanical properties of dissimilar copper-brass friction stir welding 307

Study on the utilization of supersaturation degree in Al deoxidation to improve cleanliness and control of Al2O3 inclusions in ultra-low carbon steel 308

Study on the phase evolution and element migration of vanadium oxide during the nitridation process 309

Effect of Mg treatment on distribution of inclusions in Fe-O-Al-Mg melt 310

Coal macerals and their separation methodologies – A review 311

Research on corrosion mechanism of refractory lining in drip zone of COREX melting gasifier 312

Oxidation and hot corrosion behavior of a directionally solidified W richen cobalt-based superalloy 313

An investigation on electrical discharge metal matrix coating of ZE41A magnesium alloy 314

The separation of ε- and γ’-phases in the plasma nitrided layer by colour etching techniques 315

Effect of fluorine on surface tension of CaO-SiO2-Al2O3-Na2O-CaF2 mold flux 316

Sensitivity analysis, identification and validation of the dislocation density-based model for metallic materials 317

Optimizing MgO distribution between sinter and pellet based on melting behavior and interaction 318

Study on corrosion resistance behavior and formation mechanism of Ce conversion coating on manganese 319

Sandwich materials with a crumpled aluminium core 320

Performance analysis of hot metal temperature prediction in a blast furnace and expert suggestion system proposal using neural, statistical and fuzzy models 321

Effect of CaO–SiO₂–Al₂O₃–MgO top slag on solute elements and non-metallic inclusions in Fe-xMn(x = 10, 20 mass pct) steel 302

Study on the utilization of supersaturation degree in Al deoxidation to improve cleanliness and control of Al₂O₃ inclusions in ultra-low carbon steel 308

Effect of fluorine on surface tension of CaO-SiO₂-Al₂O₃-Na₂O-CaF₂ mold flux 316