Metallurgical Research & Technology

Fatigue life prediction of the nitrided steel by multiaxial high cycle fatigue criteria 501

Rafik Bechouel, Abdelkarim Ghanem and Mohamed Ali Terres

Published online: 03 July 2024

DOI: https://doi.org/10.1051/metal/2024045

• Abstract
• Full HTML
• PDF (3.736 MB)
• References

Hydrogen reduction of iron oxides in shaft furnaces 502

Rémy Nicolle

Published online: 18 July 2024

DOI: https://doi.org/10.1051/metal/2024046

• Abstract
• Full HTML
• PDF (4.412 MB)
• References

Investigation of the effect of P₂O₅ and CaF₂ on the crystallization behavior of La₂O₃-bearing calcium–silicate–aluminum slags using the single hot thermocouple technique 503

Fuheng Zhao, Yongchun Deng, Wenbin Xin, Jing Zhang, Yinju Jiang, Zuojun Cao and Liyong Wang

Published online: 22 July 2024

DOI: https://doi.org/10.1051/metal/2024050

• Abstract
• Full HTML
• PDF (6.435 MB)
• References

Calphad-based thermodynamic assessment of Sm-In binary system supported by Ab-initio calculations 504

Fatima-Ezzahra Kerkoubi, Fatima Zahra Chrifi Alaoui, Kamal Mahdouk, Meriam Boulgana, Khadija Achgar, Mustaphe Ait Boukideur, Mohamed Idbenali and Najim Selhaoui

Published online: 23 July 2024

DOI: https://doi.org/10.1051/metal/2024056

• Abstract
• Full HTML
• PDF (1.523 MB)
• References

Review

Synergistic optimization control of blast furnace coal injection based on raceway state feedback 505

Pengcheng Xiong, Guimei Cui, Donghao Lv and Yong Zhang

Published online: 08 August 2024

DOI: https://doi.org/10.1051/metal/2024057

• Abstract
• Full HTML
• PDF (1.961 MB)
• References

Investigation on the effect of reduction process on internal quality of high carbon steel billet and its evolution in as-rolled wire rod 506

Yubo Gao, Yanping Bao, Min Wang, Haibo Zhang and Ying Wang

Published online: 27 August 2024

DOI: https://doi.org/10.1051/metal/2024058

• Abstract
• Full HTML
• PDF (3.654 MB)
• References

Research on the improvement and mechanism of La-Ce on inclusions in GCr15 bearing steel 507

Xiang-Yu Wu, Zheng-Peng Han, Yu-Tang Li, Qian-Ren Tian and Jian-Xun Fu

Published online: 04 October 2024

DOI: https://doi.org/10.1051/metal/2024064

• Abstract
• Full HTML
• PDF (2.729 MB)
• References

Numerical understanding of MnS precipitation influence on solute micro-segregation during solidification 508

Nianfu Liu, Yutang Li, Juan Cheng and Jianxun Fu

Published online: 04 October 2024

DOI: https://doi.org/10.1051/metal/2024061

• Abstract
• Full HTML
• PDF (2.579 MB)
• References

Interfacial reaction behavior in blast furnace and analysis of influence mechanism 509

Yong Deng, Kuo Yao, Ran Liu, Yanjia Gao and Laixin Wang

Published online: 04 October 2024

DOI: https://doi.org/10.1051/metal/2024059

• Abstract
• Full HTML
• PDF (1.620 MB)
• References

Coordinate regulation mechanism of primary recrystallization texture and microstructure of grain-oriented silicon steel 510

Fan Lifeng, Zhu Tiannan, Gao Jun, Xiao Lijun, Yue Erbin, Li Hongbin and Chen Liansheng

Published online: 07 October 2024

DOI: https://doi.org/10.1051/metal/2024063

• Abstract
• Full HTML
• PDF (4.342 MB)
• References

An investigation on surface integrity and microstructure behaviour of AISI 304 stainless steel machined by die sinking EDM 511

Jayakumar Sivakumar, Jayakumar Lakshmipathy and Elaiyarasan Uthirapathi

Published online: 07 October 2024

DOI: https://doi.org/10.1051/metal/2024065

• Abstract
• Full HTML
• PDF (15.23 MB)
• References

On β-titanium alloys: tailoring gamma-ray, and neutron transmission properties for nuclear and biomedical applications 512

Ghada AlMisned, Duygu Sen Baykal, Hessa Alkarrani, Ömer Güler, Gokhan Kilic, Asghar Mesbahi and Huseyin Ozan Tekin

Published online: 07 October 2024

DOI: https://doi.org/10.1051/metal/2024062

• Abstract
• Full HTML
• PDF (4.020 MB)
• References

Review

Critical LME elongation: a criterion measured with Gleeble correlated to LME sensitivity during spot welding 513

Christine Kaczynski, Thomas Dupuy and Astrid Perlade

Published online: 16 October 2024

DOI: https://doi.org/10.1051/metal/2024060

• Abstract
• Full HTML
• PDF (3.887 MB)
• References

Growth mechanism of Al₂O₃ on surface of ZrO₂ inclusions: experimental and first principles investigation 514

Xiang Li, Yanping Bao, Jun Wang, Yutang Li and Linzhu Wang

Published online: 28 October 2024

DOI: https://doi.org/10.1051/metal/2024067

• Abstract
• Full HTML
• PDF (1.666 MB)
• References

Research on short process rolling of high performance wear resistant steel/carbon steel clad plate 515

Yanbing Lv, Fuzhen Qiao, Jiayu Song, Zhiquan Huang and Lianyun Jiang

Published online: 28 October 2024

DOI: https://doi.org/10.1051/metal/2024068

• Abstract
• Full HTML
• PDF (15.99 MB)
• References

Microstructure evolution and quantitative analysis of mechanical properties of cold-rolled low carbon niobium steel 516

Wentao Luo

Published online: 28 October 2024

DOI: https://doi.org/10.1051/metal/2024072

• Abstract
• Full HTML
• PDF (2.841 MB)
• References

Three-dimensional heat transfer analysis in a funnel type mold for thin slab continuous casting 517

Guangxin Song, Ce Liang, Jie Zeng and Wanlin Wang

Published online: 28 October 2024

DOI: https://doi.org/10.1051/metal/2024076

• Abstract
• Full HTML
• PDF (2.906 MB)
• References

Investigation on surface tension of CaF₂–CaO–SiO₂ (–MgO–Al₂O₃) melts 518

Yigui Lao, Yunming Gao, Qiang Wang and Guangqiang Li

Published online: 28 October 2024

DOI: https://doi.org/10.1051/metal/2024066

• Abstract
• Full HTML
• PDF (1.778 MB)
• References