Sur la fragilité de revenu des aciers au Chrome, au Molybdène, au Tungstène
Rev. Met. Paris, 42 5 (1945) 149-155
Published online: 2017-03-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Impurities in Engineering Materials
J. R. Nutting *Impurities in Engineering Materials 13 (2017)
https://doi.org/10.1201/9780203751190-2
Landolt-Börnstein
F. W. Strassburg, K. H. Scheffler, K. Bungardt, et al.Landolt-Börnstein 301 (2013)
https://doi.org/10.1007/978-3-662-43294-5_1
Restoration of charpy toughness for “in service” temper embrittled steels
J.H. Bulloch and J.J. HickeyTheoretical and Applied Fracture Mechanics 21 (2) 131 (1994)
https://doi.org/10.1016/0167-8442(94)00033-6
The role of reverse temper embrittlement on some low and high temperature crack extension processes in low carbon, low alloy steels: A review
J.J. Hickey and J.H. BullochInternational Journal of Pressure Vessels and Piping 49 (3) 339 (1992)
https://doi.org/10.1016/0308-0161(92)90121-U
Temper embrittlement of low alloy NI-CR steels—I. The susceptibility to temper embrittlement and the influence of intermediate tempering treatments
B.C. Edwards, B.L. Eyre and G. GageActa Metallurgica 28 (3) 335 (1980)
https://doi.org/10.1016/0001-6160(80)90169-8
Role of carbon in embrittlement phenomena of tempered martensitic 12Cr-0.15%C steel
G. V. Prabhu Gaunkar, A. M. Huntz and P. LacombeMetal Science 14 (7) 241 (1980)
https://doi.org/10.1179/030634580790426427
The effects of composition and carbide precipitation on temper embrittlement of 2.25 Cr-1 Mo steel: Part I. Effects of P and Sn
Jin Yu and C. J. McMahonMetallurgical Transactions A 11 (2) 277 (1980)
https://doi.org/10.1007/BF02660632
Intergranularfailure in steel: the role of grain-boundary composition
C. L. Briant and S. K. BanerjiInternational Metals Reviews 23 (1) 164 (1978)
https://doi.org/10.1179/imtr.1978.23.1.164
Temper embrittlement
I. OlefjordInternational Metals Reviews 23 (1) 149 (1978)
https://doi.org/10.1179/imtr.1978.23.1.149
Reversible temper embrittlement of rotor steels
G. M. SpinkMetallurgical Transactions A 8 (1) 135 (1977)
https://doi.org/10.1007/BF02677275
Interface adsorption, embrittlement and fracture in metallurgy
M.P. SeahSurface Science 53 (1) 168 (1975)
https://doi.org/10.1016/0039-6028(75)90124-7
Temper embrittlement and intergranular segregation of antimony: A quantitative analysis performed with the backscattering of energetic ions
M. Guttmann, P. R. Krahe, F. Abel, et al.Metallurgical transactions 5 (1) 167 (1974)
https://doi.org/10.1007/BF02642941
Effect of prior austenitic grain boundary composition on temper brittleness in a Ni-Cr-Sb steel
Craig L. Smith and John R. LowMetallurgical transactions 5 (1) 279 (1974)
https://doi.org/10.1007/BF02642952
Intergranular embrittlement of iron-carbon alloys by impurities
J. B. Rellick and C. J. McMahonMetallurgical transactions 5 (11) 2439 (1974)
https://doi.org/10.1007/BF02644027
Determining susceptibility to reversible temper brittleness
A. V. TaranMetal Science and Heat Treatment 15 (10) 865 (1973)
https://doi.org/10.1007/BF00656066
On the segregation of manganese and antimony to the grain boundaries of temper embrittled steel
P.R. Krahe and M. GuttmanScripta Metallurgica 7 (4) 387 (1973)
https://doi.org/10.1016/0036-9748(73)90061-6
The range of reversible temper brittleness of structural steels with molybdenum and nickel
A. V. Taran and V. N. ZikeevMetal Science and Heat Treatment 14 (11) 1000 (1972)
https://doi.org/10.1007/BF00652002
Grain boundary segregation and desegregation of antimony in temper-brittle steel, identified and measured by the elastic scattering of energetic ions
M. Guttmann, P.R. Krahe, F. Abel, et al.Scripta Metallurgica 5 (6) 479 (1971)
https://doi.org/10.1016/0036-9748(71)90095-0
Effect of purity on the temper brittleness of improved structural steels
A. P. Gulyaev and A. V. TaranMetal Science and Heat Treatment 13 (10) 844 (1971)
https://doi.org/10.1007/BF00713820
A study of temper brittleness by internal friction measurements
L. Delage and A. GaliboisScripta Metallurgica 5 (11) 955 (1971)
https://doi.org/10.1016/0036-9748(71)90135-9
127 (1968)
https://doi.org/10.1520/STP46479S
Handbuch der Gießerei-Technik
W. TrommerHandbuch der Gießerei-Technik 39 (1959)
https://doi.org/10.1007/978-3-642-86949-5_2
Upper nose temper embrittlement of a Ni-Cr steel
L. D. Jaffe and D. C. BuffumJOM 9 (1) 8 (1957)
https://doi.org/10.1007/BF03398437
Isoembrittlement in Chromium and Molybdenum Alloy Steels During Tempering
Gopalkrishna Bhat and Joseph F. LibschJOM 7 (2) 330 (1955)
https://doi.org/10.1007/BF03377502
A quantitative measure of temper embrittlement
Norman BrownJOM 6 (3) 361 (1954)
https://doi.org/10.1007/BF03398018
TEMPER-BRITTLENESS OF THE MEDIUM-C LOW Mn-Cr STEELS
Z. Takao, K. Takahashi, M. Nishihara and Y. TanifujiTetsu-to-Hagane 39 (12) 1323 (1953)
https://doi.org/10.2355/tetsutohagane1915.39.12_1323