Contribution à l'étude de la forme des courbes de traction des métaux et à son interprétation physique
Rev. Met. Paris, 47 8 (1950) 589-600
Published online: 2017-03-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Low-temperature plasticity of hcp substitution solid solution Ti–Nb
V. A. Moskalenko and R. V. SmolianetsLow Temperature Physics 51 (11) 1356 (2025)
https://doi.org/10.1063/10.0039566
Influence of diameter and scan strategy on the geometrical, microstructural, and mechanical properties of small Inconel 625 L-PBF struts
J. Rodrigues Da Silva, Z. Hamouche, A.-L. Helbert, T. Baudin, F. Coste and P. PeyreJournal of Materials Processing Technology 336 118702 (2025)
https://doi.org/10.1016/j.jmatprotec.2024.118702
Work hardening and X-ray diffraction studies on ASS 304 at high temperatures
A. Anitha Lakshmi, Alok Bhadauria, Ashish Kumar and Rakesh ChandrashekarHigh Temperature Materials and Processes 43 (1) (2024)
https://doi.org/10.1515/htmp-2024-0008
Multi-stage strain-hardening behavior of dual-phase steels: A review
Y. Najafi, Y. Mazaheri, Z. Delbari Ragheb and H. DaiyJournal of Materials Research and Technology 31 3860 (2024)
https://doi.org/10.1016/j.jmrt.2024.07.100
Effect of intercritical annealing on deformation behavior and flow stress predictive models of AISI 8620 steel
Visarut Phatiwach, Laksamee Angkurarach and Patiphan JuijermJournal of Materials Science 58 (33) 13488 (2023)
https://doi.org/10.1007/s10853-023-08858-w
Correlating in-plane strength anisotropy with its microstructural counterpart for a hot rolled line pipe steel
Chetan Kadgaye, Santosh Godase, Arnab Karani, Kaustav Barat, Debalay Chakrabarti and Anish KarmakarInternational Journal of Pressure Vessels and Piping 199 104753 (2022)
https://doi.org/10.1016/j.ijpvp.2022.104753
Effects of Distributions of Constituent Phases on Mechanical Properties of C–Si–Mn Dual-phase Steel
Tatsuya Nakagaito, Takako Yamashita, Takeshi Yokota, Yoshihiro Terada and Masanori KajiharaTetsu-to-Hagane 108 (6) 370 (2022)
https://doi.org/10.2355/tetsutohagane.TETSU-2022-002
Alloy 625
Jung Bahadur SinghMaterials Horizons: From Nature to Nanomaterials, Alloy 625 111 (2022)
https://doi.org/10.1007/978-981-19-1562-8_4
Strain hardening behavior of friction welded beta titanium alloy Titan 1023 used for aeronautical applications
D.B. Anant Sagar, Y. Pardhu, M.S.K. Rao and N. NarasaiahMaterials Today: Proceedings 57 687 (2022)
https://doi.org/10.1016/j.matpr.2022.02.113
Novel flow stress prediction and work hardening behavior of aluminium alloy AA7075 at room and elevated temperatures
Udomsak Rotpai, Terdsak Arlai, Sankum Nusen and Patiphan JuijermJournal of Alloys and Compounds 891 162013 (2022)
https://doi.org/10.1016/j.jallcom.2021.162013
Strain Hardening Dependence on the Structure in Dual‐Phase Steels
Mohamed Soliman and Heinz Palkowskisteel research international 92 (4) (2021)
https://doi.org/10.1002/srin.202000518
Effects of Distributions of Constituent Phases on Mechanical Properties of C–Si–Mn Dual-phase Steel
Tatsuya Nakagaito, Takako Yamashita, Takeshi Yokota, Yoshihiro Terada and Masanori KajiharaISIJ International 61 (1) 452 (2021)
https://doi.org/10.2355/isijinternational.ISIJINT-2020-435
On the Simultaneous Improving of Strength and Elongation in Dual Phase Steels via Cold Rolling
Yousef Mazaheri, Amir Hossein Jahanara, Mohsen Sheikhi and Ehsan GhassemaliMetals 10 (12) 1676 (2020)
https://doi.org/10.3390/met10121676
Flow Stress Behavior, Constitutive Modeling, and Microstructural Characteristics of DP 590 Steel at Elevated Temperatures
Sandeep Pandre, Nitin Kotkunde, Prathamesh Takalkar, et al.Journal of Materials Engineering and Performance 28 (12) 7565 (2019)
https://doi.org/10.1007/s11665-019-04497-y
Work hardening behaviour and damage mechanisms in carbide-free bainitic steel during uni-axial tensile deformation
Sk Md Hasan, Arka Mandal, Shiv Brat Singh and Debalay ChakrabartiMaterials Science and Engineering: A 751 142 (2019)
https://doi.org/10.1016/j.msea.2019.02.062
High strength-elongation balance in ultrafine grained ferrite-martensite dual phase steels developed by thermomechanical processing
Yousef Mazaheri, Amir Hossein Jahanara, Mohsen Sheikhi and Ali Ghatei KalashamiMaterials Science and Engineering: A 761 138021 (2019)
https://doi.org/10.1016/j.msea.2019.06.031
High temperature work hardening stages, dynamic strain aging and related dislocation structure in tensile deformed AISI 301 stainless steel
Sergio Neves Monteiro, Lucio Fabio Cassiano Nascimento, Noan Tonini Simonassi, et al.Journal of Materials Research and Technology 7 (4) 571 (2018)
https://doi.org/10.1016/j.jmrt.2018.06.020
Effect of strain rate on tensile and serration behaviors of an austenitic Fe-22Mn-0.7C twinning-induced plasticity steel
Seung-Yong Lee, Sang-In Lee and Byoungchul HwangMaterials Science and Engineering: A 711 22 (2018)
https://doi.org/10.1016/j.msea.2017.10.074
Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel
Manpreet Singh, Anindya Das, T. Venugopalan, et al.Metallurgical and Materials Transactions A 49 (2) 463 (2018)
https://doi.org/10.1007/s11661-017-4433-y
Age hardening behaviour of Alloy 693
Shabana Khan, Jung B. Singh and A. VermaMaterials Science and Engineering: A 697 86 (2017)
https://doi.org/10.1016/j.msea.2017.04.109
Hot-rolled and continuously cooled bainitic steel with good strength–elongation combination
S. Das, S. Sinha, A. Lodh, A. R. Chintha, M. Krugla and A. HaldarMaterials Science and Technology 33 (8) 1026 (2017)
https://doi.org/10.1080/02670836.2016.1268663
Micromechanisms of deformation in dual phase steels at high strain rates
Anindya Das, Mainak Ghosh, Soumitra Tarafder, S. Sivaprasad and Debalay ChakrabartiMaterials Science and Engineering: A 680 249 (2017)
https://doi.org/10.1016/j.msea.2016.10.101
Hot tensile properties and strain hardening behaviour of Super 304HCu stainless steel
M. Vinoth Kumar, V. Balasubramanian and A. Gourav RaoJournal of Materials Research and Technology 6 (2) 116 (2017)
https://doi.org/10.1016/j.jmrt.2016.05.004
Characterization of twin-like structure in a ferrite-based lightweight steel
Pooriya Dastranjy Nezhadfar, Abbas Zarei-Hanzaki, Seok Su Sohn and Hamid Reza AbediMetals and Materials International 22 (5) 810 (2016)
https://doi.org/10.1007/s12540-016-6113-7
Microstructure–mechanical property correlation of cryo rolled Zircaloy-4
Apu Sarkar and Korukonda L. MurtyJournal of Nuclear Materials 456 287 (2015)
https://doi.org/10.1016/j.jnucmat.2014.09.071
TMS 2014: 143rd Annual Meeting & Exhibition
A. Sarkar, A. H. Alsabbagh and K. L. MurtyTMS 2014: 143rd Annual Meeting & Exhibition 147 (2014)
https://doi.org/10.1007/978-3-319-48237-8_20
Constitutive Description of Tensile Flow Behavior of Cold Flow-Formed AFNOR 15CDV6 Steel at Different Deformation Levels
Chandan Mondal, Bikramjit Podder, K. Ramesh Kumar and D. R. YadavJournal of Materials Engineering and Performance 23 (10) 3586 (2014)
https://doi.org/10.1007/s11665-014-1127-0
Investigation of microstructure and mechanical properties of low dose neutron irradiated HT-9 steel
A. Sarkar, A.H. Alsabbagh and K.L. MurtyAnnals of Nuclear Energy 65 91 (2014)
https://doi.org/10.1016/j.anucene.2013.11.008
Strain hardening behavior of ARMCO iron processed by ECAP
J A Muñoz Bolaños, O F Higuera Cobos and J M Cabrera MarreroIOP Conference Series: Materials Science and Engineering 63 012143 (2014)
https://doi.org/10.1088/1757-899X/63/1/012143
A novel route for development of ultrahigh strength dual phase steels
Yousef Mazaheri, Ahmad Kermanpur and Abbas NajafizadehMaterials Science and Engineering: A 619 1 (2014)
https://doi.org/10.1016/j.msea.2014.09.058
Low-temperature plastic deformation and strain-hardening of nanocrystalline titanium
V. A. Moskalenko, A. R. Smirnov and R. V. SmolyanetsLow Temperature Physics 40 (9) 837 (2014)
https://doi.org/10.1063/1.4896780
145 (2014)
https://doi.org/10.1002/9781118889879.ch20
Work hardening behaviour of service aged Alloy 625
Jung B. Singh, J.K. Chakravartty and M. SundararamanMaterials Science and Engineering: A 576 239 (2013)
https://doi.org/10.1016/j.msea.2013.03.091
Effect of aging on work hardening behaviour of cold rolled Nimonic C-263 alloy
K Ankamma, D V V Satyanarayana, R Sarkar, G C M Reddy, M Komaraiah and N Eswara PrasadMaterials Science and Technology 27 (8) 1333 (2011)
https://doi.org/10.1179/026708310X12701095964649
A generic stress–strain model for metallic materials with two-stage strain hardening behaviour
Stijn Hertelé, Wim De Waele and Rudi DenysInternational Journal of Non-Linear Mechanics 46 (3) 519 (2011)
https://doi.org/10.1016/j.ijnonlinmec.2010.12.004
Strain Hardening Behavior of High Performance FBDP, TRIP and TWIP Steels
Ming‐hui Cai, Hua Ding, Zheng‐you Tang, Hua‐ying Lee and Young‐kook Leesteel research international 82 (3) 242 (2011)
https://doi.org/10.1002/srin.201000132
Charles Crussard's contribution to sheet metal forming and participation in IDDRG
Alain Col and Marc GrumbachInternational Journal of Materials Research 100 (10) 1399 (2009)
https://doi.org/10.3139/146.110188
Strain hardening behavior of a Fe–18Mn–0.6C–1.5Al TWIP steel
Jae-Eun Jin and Young-Kook LeeMaterials Science and Engineering: A 527 (1-2) 157 (2009)
https://doi.org/10.1016/j.msea.2009.08.028
Work-Hardening Behavior of the Ni-Fe Based Superalloy IN718
K.V.U. Praveen, G.V.S. Sastry and Vakil SinghMetallurgical and Materials Transactions A 39 (1) 65 (2008)
https://doi.org/10.1007/s11661-007-9375-3
Strain Hardening Behavior of Ultrafine‐ Grained Cu by Analyzing the Tensile Stress‐Strain Curve
C.‐X. Huang, S.‐D. Wu, S.‐X. Li and Z.‐F. ZhangAdvanced Engineering Materials 10 (5) 434 (2008)
https://doi.org/10.1002/adem.200700324
Effect of pre-deformation on the tensile properties of a metastable austenitic steel
Yeon-Seung Jung and Young-Kook LeeScripta Materialia 59 (1) 47 (2008)
https://doi.org/10.1016/j.scriptamat.2008.02.019
Strain hardening behaviour of an Fe–Ni–Cr–Al alloy
D. V. V. Satyanarayana, K. Satya Prasad, G. Malakondaiah and D. S. SarmaMaterials Science and Technology 23 (1) 79 (2007)
https://doi.org/10.1179/174328407X158451
Ultrafine Grained Dual Phase Steels Fabricated by Equal Channel Angular Pressing
Dong Hyuk Shin, Woo Gyeom Kim, Jung Yong Ahn, Kyung Tae Park and Yong Suk KimMaterials Science Forum 503-504 447 (2006)
https://doi.org/10.4028/www.scientific.net/MSF.503-504.447
Determination of the Work Hardening Exponent by the Hollomon and Differential Crussard-Jaoul Analyses of Cold Drawn Ferrite-Pearlite Steels
I. Mejía, C. Maldonado, Josep Antonio Benito, Jordi Jorba and Antoni RocaMaterials Science Forum 509 37 (2006)
https://doi.org/10.4028/www.scientific.net/MSF.509.37
Correlation of structure and flow behaviour of Cu–Ti–Cd alloys
R. Markandeya, S. Nagarjuna, D.V.V. Satyanarayana and D.S. SarmaMaterials Science and Engineering: A 428 (1-2) 233 (2006)
https://doi.org/10.1016/j.msea.2006.05.034
Effect of prestrain on the ductile fracture behavior of an interstitial-free steel
Shrabani Majumdar and K. K. RayMetallurgical and Materials Transactions A 37 (12) 3541 (2006)
https://doi.org/10.1007/s11661-006-1049-z
Mechanical behaviour of ultrafine grained aluminium containing Al8Fe2Si precipitates
A. Korchef, A. W. Kolsi and N. Njahphysica status solidi (a) 203 (8) 1920 (2006)
https://doi.org/10.1002/pssa.200521531
Ultrafine grained ferrite–martensite dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties
Young Il Son, Young Kook Lee, Kyung-Tae Park, Chong Soo Lee and Dong Hyuk ShinActa Materialia 53 (11) 3125 (2005)
https://doi.org/10.1016/j.actamat.2005.02.015
Effect of temperature and strain rate on tensile flow and work hardening behaviour of a Ti modified austenitic stainless steel
P. V. Sivaprasad, S. Venugopal and S. VenkadesanMaterials Science and Technology 20 (3) 350 (2004)
https://doi.org/10.1179/026708304225012152
Staged work hardening of polycrystalline titanium at low temperatures and its relation to substructure evolution
V. A. Moskalenko, A. R. Smirnov, V. N. Kovaleva and V. D. NatsikLow Temperature Physics 28 (12) 935 (2002)
https://doi.org/10.1063/1.1531398
Tensile stress–strain and work hardening behaviour of 316LN austenitic stainless steel
B.K. Choudhary, E.I. Samuel, K. Bhanu Sankara Rao and S.L. MannanMaterials Science and Technology 17 (2) 223 (2001)
https://doi.org/10.1179/026708301101509890
The Plastic Anisotropy in Single Crystals and Polycrystalline Metals
Wojciech TruszkowskiThe Plastic Anisotropy in Single Crystals and Polycrystalline Metals 11 (2001)
https://doi.org/10.1007/978-94-015-9692-3_2
Tensile stress-strain analysis of single-structure steels
M. Umemoto, K. Tsuchiya, Z. G. Liu and S. SugimotoMetallurgical and Materials Transactions A 31 (7) 1785 (2000)
https://doi.org/10.1007/s11661-006-0249-x
Tensile flow and work-hardening behavior of a Ti-modified austenitic stainless steel
P. V. Sivaprasad, S. Venugopal and S. VenkadesanMetallurgical and Materials Transactions A 28 (1) 171 (1997)
https://doi.org/10.1007/s11661-997-0092-8
Strain hardening in underaged INCONEL 718
M. Sundararaman, R. Kishore and P. MukhopadhyayMetallurgical and Materials Transactions A 25 (3) 653 (1994)
https://doi.org/10.1007/BF02651609
Deformation behaviour of titanium aluminides at room temperature
P. Prasad Rao and K. TangriMaterials Science and Technology 8 (12) 1117 (1992)
https://doi.org/10.1179/mst.1992.8.12.1117
Yielding and work hardening behaviour of titanium aluminides at different temperatures
P.Prasad Rao and Kris TangriMaterials Science and Engineering: A 132 49 (1991)
https://doi.org/10.1016/0921-5093(91)90360-Y
Analysis of the temperature dependence of strain-hardening behavior in high- strength steel
N. S. Mishra, Sanak Mishra and V. RamaswamyMetallurgical Transactions A 20 (12) 2819 (1989)
https://doi.org/10.1007/BF02670174
Deformation behaviour of γ″ strengthened inconel 718
M. Sundararaman, P. Mukhopadhyay and S. BanerjeeActa Metallurgica 36 (4) 847 (1988)
https://doi.org/10.1016/0001-6160(88)90139-3
Tensile stress-strain analysis of dual-phase structures in an MnCrSi steel
Fawzy H. SamuelMaterials Science and Engineering 92 L1 (1987)
https://doi.org/10.1016/0025-5416(87)90179-0
Tensile stress-strain analysis of cold worked metals and steels and dual-phase steels
Yoshiyuki Tomita and Kunio OkabayashiMetallurgical Transactions A 16 (5) 865 (1985)
https://doi.org/10.1007/BF02814837
Deformation behaviour of two phase materials: Cu-Al system
A. H. Yegneswaran and K. TangriMetal Science 18 (3) 161 (1984)
https://doi.org/10.1179/msc.1984.18.3.161
121 (1982)
https://doi.org/10.1520/STP28884S
Influence of the martensitic transformation on the deformation behaviour of an AISI 316 stainless steel at low temperatures
V. Seetharaman and R. KrishnanJournal of Materials Science 16 (2) 523 (1981)
https://doi.org/10.1007/BF00738646
Precipitation hardening in a PH 13-8 Mo stainless steel
V. Seetharaman, M. Sundararaman and R. KrishnanMaterials Science and Engineering 47 (1) 1 (1981)
https://doi.org/10.1016/0025-5416(81)90034-3
Effect of interstitial solutes on the strength and ductility of titanium
Hans ConradProgress in Materials Science 26 (2-4) 123 (1981)
https://doi.org/10.1016/0079-6425(81)90001-3
Micrograin superplasticity in Zircaloy at 850°C
A.M. Garde, H.M. Chung and T.F. KassnerActa Metallurgica 26 (1) 153 (1978)
https://doi.org/10.1016/0001-6160(78)90212-2
Stress-strain curves in alpha Ti alloys—Some problems and results
H. W. RosenbergMetallurgical Transactions A 8 (3) 451 (1977)
https://doi.org/10.1007/BF02661755
Concerning the strength of dynamic strain aging in zirconium
A. M. Garde, E. Aigeltinger, B. N. Woodruff and R. E. Reed-HillMetallurgical Transactions A 6 (6) 1183 (1975)
https://doi.org/10.1007/BF02658527
75 (1974)
https://doi.org/10.1520/STP32105S
Relationship between deformation twinning and the stress-strain behavior of polycrystalline titanium and zirconium at 77 K
A. M. Garde, E. Aigeltinger and R. E. Reed-HillMetallurgical Transactions 4 (10) 2461 (1973)
https://doi.org/10.1007/BF02669391
An empirical analysis of titanium stress-strain curves
S. N. Monteiro and R. E. Reed-HillMetallurgical Transactions 4 (4) 1011 (1973)
https://doi.org/10.1007/BF02645603
The effects of temperature and purity on the second stage of hardening in polycrystalline α-titanium
V. S. Arunachalam, S. Pattanaik, S. N. Monteiro and R. E. Reed-HillMetallurgical Transactions 3 (4) 1009 (1972)
https://doi.org/10.1007/BF02647684
Déformation plastique et rupture du beryllium coulé et lamine sous pression hydrostatique inférieure à 15 kbar
D Bedere, G Jamard, A Jarlaud and D FrancoisActa Metallurgica 19 (9) 973 (1971)
https://doi.org/10.1016/0001-6160(71)90090-3
On the double-n behavior of iron
S. N. Monteiro and R. E. Reed-HillMetallurgical Transactions 2 (10) 2947 (1971)
https://doi.org/10.1007/BF02813280
Oxygen dependence of strain-ageing in niobium
Z.C SzkopiakActa Metallurgica 16 (3) 381 (1968)
https://doi.org/10.1016/0001-6160(68)90025-4
Aluminium und Aluminiumlegierungen
D. Altenpohl and E. von BurgReine und angewandte Metallkunde in Einzeldarstellungen, Aluminium und Aluminiumlegierungen 19 547 (1965)
https://doi.org/10.1007/978-3-662-30245-3_11
Dislocations
Dislocations 460 (1964)https://doi.org/10.1016/B978-0-08-013523-6.50027-2
Magnetische Messungen zur Verfestigungskurve von vielkristallinem Nickel
Ch. Schwink and G. Zanklphysica status solidi (b) 2 (10) (1962)
https://doi.org/10.1002/pssb.19620021022
Consolidation des polycristaux de fer et hypothèses sur l'origine du palier des courbes de traction
Par B. JaoulJournal of the Mechanics and Physics of Solids 9 (2) 69 (1961)
https://doi.org/10.1016/0022-5096(61)90026-6
Etude de la forme des courbes de deformation plastique
Par B. JaoulJournal of the Mechanics and Physics of Solids 5 (2) 95 (1957)
https://doi.org/10.1016/0022-5096(57)90054-6
Deformation and Flow of Solids / Verformung und Fliessen des Festkörpers
B. JaoulDeformation and Flow of Solids / Verformung und Fliessen des Festkörpers 13 (1956)
https://doi.org/10.1007/978-3-642-48236-6_3
Geiger-counter determinations of X-ray lattice strains in plastically deformed aluminum alloy
D. Hasanovitsh, M. Kaufman and D. RosenthalActa Metallurgica 4 (2) 218 (1956)
https://doi.org/10.1016/0001-6160(56)90147-X
Détermination des sous-structures dans les monocristaux métalliques à l'aide des rayons X
H. Lambot, L. Vassamillet and J. DejaceActa Metallurgica 3 (2) 150 (1955)
https://doi.org/10.1016/0001-6160(55)90084-5
A study of the plastic deformation of copper single crystals
C.R Cupp and B ChalmersActa Metallurgica 2 (6) 803 (1954)
https://doi.org/10.1016/0001-6160(54)90032-2