Contribution à l’étude des transformations des austénites à 12 % Mn
Rev. Met. Paris, 54 6 (1957) 433-486
Published online: 2017-03-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A Comprehensive Exploration of the Relationship between Microstructure Optimization and Strength Enhancement in Low-Density 5Al-5Mn Steel
Mengjun Chen, Tingping Hou, Shi Cheng, Feng Hu, Tao Yu, Xianming Pan, Yuanyuan Li and Kaiming WuActa Metallurgica Sinica (English Letters) (2025)
https://doi.org/10.1007/s40195-025-01848-8
Effect of Austempering Processes on the Tensile Properties and the Work-Hardening Behavior of Austempered Bainitic Steels Below the Martensite Start Temperature
Kun Wang, Feng Hu, Wen Zhou, Serhii Yershov, Li Li and Kaiming WuMaterials 16 (16) 5562 (2023)
https://doi.org/10.3390/ma16165562
Structural Changes of Hadfield Steel Single Crystals Under Dry Sliding Friction
O. S. Novitskaya, D. V. Lychagin, A. V. Filippov and Y. I. ChumlyakovRussian Physics Journal 66 (5) 485 (2023)
https://doi.org/10.1007/s11182-023-02965-6
Deformation and wear of Hadfield steel single crystals under dry sliding friction
D.V. Lychagin, A.V. Filippov, O.S. Novitskaya, et al.Wear 488-489 204126 (2022)
https://doi.org/10.1016/j.wear.2021.204126
Intelligent Quality Assessment of Railway Switches and Crossings
Ankit Kumar, Roumen Petrov and Jilt SietsmaSpringer Series in Reliability Engineering, Intelligent Quality Assessment of Railway Switches and Crossings 63 (2021)
https://doi.org/10.1007/978-3-030-62472-9_4
Failure analysis of a crossing rail made of Hadfield steel after severe plastic deformation induced by wheel-rail interaction
O.A. Zambrano, G. Tressia and R.M. SouzaEngineering Failure Analysis 115 104621 (2020)
https://doi.org/10.1016/j.engfailanal.2020.104621
Hot Deformation Behavior and Processing Maps of Fe-30Mn-0.11C Steel
Jianmei Kang, Yuhui Wang, Zhimeng Wang, Yiming Zhao, Yan Peng and Tiansheng WangMaterials 11 (10) 1940 (2018)
https://doi.org/10.3390/ma11101940
High Interstitial Stainless Austenitic Steels
Hans Berns, Valentin Gavriljuk and Sascha RiednerEngineering Materials, High Interstitial Stainless Austenitic Steels 21 (2013)
https://doi.org/10.1007/978-3-642-33701-7_3
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
O. Bouaziz, S. Allain, C.P. Scott, P. Cugy and D. BarbierCurrent Opinion in Solid State and Materials Science 15 (4) 141 (2011)
https://doi.org/10.1016/j.cossms.2011.04.002
Impact and Sliding Wear Resistance of Hadfield and Rail Steel
R. Harzallah, A. Mouftiez, S. Hariri, E. Felder and J.P. MaujeanApplied Mechanics and Materials 146 112 (2011)
https://doi.org/10.4028/www.scientific.net/AMM.146.112
Rolling contact fatigue of Hadfield steel X120Mn12
R. Harzallah, A. Mouftiez, E. Felder, S. Hariri and J.-P. MaujeanWear 269 (9-10) 647 (2010)
https://doi.org/10.1016/j.wear.2010.07.001
Fatigue and Structural Changes of High Interstitial Stainless Austenitic Steels
H. Berns, V.G. Gavriljuk, N. Nabiran, Yu.N. Petrov, S. Riedner and L.N. Trophimovasteel research international 81 (4) 299 (2010)
https://doi.org/10.1002/srin.200900142
Stainless Austenitic CrMnCN Steels of Superior Strength Part I: Alloy Design and Properties
Hans Berns, Sascha Riedner and A. TyshchenkoMaterials Science Forum 539-543 4956 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.539-543.4956
High Strength Stainless Austenitic CrMnCN Steels – Part I: Alloy Design and Properties
H. Berns, V.G. Gavriljuk, S. Riedner and A. Tyshchenkosteel research international 78 (9) 714 (2007)
https://doi.org/10.1002/srin.200706274
Surface structure of stainless and Hadfield steel after impact wear
Yuri N. Petrov, Valentin G. Gavriljuk, Hans Berns and Fabian SchmaltWear 260 (6) 687 (2006)
https://doi.org/10.1016/j.wear.2005.04.009
On dislocation accumulation and work hardening in Hadfield steel
Bevis Hutchinson and Norman RidleyScripta Materialia 55 (4) 299 (2006)
https://doi.org/10.1016/j.scriptamat.2006.05.002
Corrosion-resistant analogue of Hadfield steel
V.G. Gavriljuk, A.I. Tyshchenko, O.N. Razumov, et al.Materials Science and Engineering: A 420 (1-2) 47 (2006)
https://doi.org/10.1016/j.msea.2006.01.066
Nichtrostender Manganhartstahl im Vergleich
F. Schmalt and H. BernsMaterialwissenschaft und Werkstofftechnik 35 (10-11) 722 (2004)
https://doi.org/10.1002/mawe.200400813
Modulated structures of Fe–10Mn–2Cr–1.5C alloy
Li He, Zhihao Jin, Jinde Lu and Jun TangMaterials & Design 23 (8) 717 (2002)
https://doi.org/10.1016/S0261-3069(02)00072-9
Dependence of fracture toughness of austempered ductile iron on austempering temperature
P. Prasad Rao and Susil K. PutatundaMetallurgical and Materials Transactions A 29 (12) 3005 (1998)
https://doi.org/10.1007/s11661-998-0208-9
Steel Castings Handbook
Steel Castings Handbook 24-1 (1995)https://doi.org/10.31399/asm.tb.sch6.t68200327
Effects of laser-shock processing on the microstructure and surface mechanical properties of hadfield manganese steel
J. P. Chu, J. M. Rigsbee, G. Banaś, F. V. Lawrence and H. E. Elsayed-AliMetallurgical and Materials Transactions A 26 (6) 1507 (1995)
https://doi.org/10.1007/BF02647602
Mechanical properties and strain-induced phase transformations of some high-strength manganese steels
A. O. Inegbenebor, R. D. Jones and Brian RalphJournal of Materials Science 24 (10) 3529 (1989)
https://doi.org/10.1007/BF02385735
The effect of aluminum on the work hardening and wear resistance of hadfield manganese steel
B. K. Zuidema, D. K. Subramanyam and W. C. LeslieMetallurgical Transactions A 18 (9) 1629 (1987)
https://doi.org/10.1007/BF02646146
Strain Hardening of Hadfield Manganese Steel
P. H. Adler, G. B. Olson and W. S. OwenMetallurgical Transactions A 17 (10) 1725 (1986)
https://doi.org/10.1007/BF02817271
The fine structure of Hadfield steel
A. A. Gulyaev, Yu. D. Tyapkin, V. A. Golikov and V. S. ZharinovaMetal Science and Heat Treatment 27 (6) 411 (1985)
https://doi.org/10.1007/BF00693279
Mechanism of work hardening in Hadfield manganese steel
Y. N. Dastur and W. C. LeslieMetallurgical Transactions A 12 (5) 749 (1981)
https://doi.org/10.1007/BF02648339
The interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of fcc metals and alloys
L. RémyMetallurgical Transactions A 12 (3) 387 (1981)
https://doi.org/10.1007/BF02648536
Strength of Metals and Alloys
Y.N. Dastur and W.C. LeslieStrength of Metals and Alloys 619 (1979)
https://doi.org/10.1016/B978-1-4832-8412-5.50106-5
Martensitic Transformation
Martensitic Transformation 14 (1978)https://doi.org/10.1016/B978-0-12-519850-9.50007-7
Fracture of high-manganese austenitic steels
A. P. Gulyaev and V. M. ChulkovaMetal Science and Heat Treatment 16 (4) 332 (1974)
https://doi.org/10.1007/BF00679229
A study of the fine structure of steel 110G13L after high-velocity deformation
L. P. Strok, K. I. Krasikov and N. K. ShaurovaSoviet Physics Journal 16 (7) 950 (1973)
https://doi.org/10.1007/BF00891510
Effect of Alloying Elements on the Transformation and Impact Property of Austenitic High Manganese Steels
Akira SUZUKI, Hisashi TAKADA, Minoru MAKIOKA and Tadataka GOTOUTetsu-to-Hagane 55 (9) 821 (1969)
https://doi.org/10.2355/tetsutohagane1955.55.9_821
Transmission Electron Microscope Study of Cold-Rolled Hadfield Steels
Zenji Nishiyama, Muneo Oka and Hiroshi NakagawaTransactions of the Japan Institute of Metals 6 (2) 88 (1965)
https://doi.org/10.2320/matertrans1960.6.88
Advances in Electronics and Electron Physics Volume 13
Raymond CastaingAdvances in Electronics and Electron Physics, Advances in Electronics and Electron Physics Volume 13 13 317 (1960)
https://doi.org/10.1016/S0065-2539(08)60212-7