EDP Sciences logo
Subscriber Authentication Point
Sciengine logo
Search
Menu
All issues Rev. Met. Paris, 55 3 (1958) 201-210 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Outstanding strength-ductility combination in NAB alloy via coarse Widmanstätten α phases and ultrafine (α+κ) lamella structure

Xiaobin Yang, Deyun Liu, Siyu Kuang, Kai Yin, Cong Ye, Yiheng Dong, Jiang Ju, Zhao Shen, Shuo Ma, Liming Fu and Aidang Shan
Materials Science and Engineering: A 920 147565 (2025)
https://doi.org/10.1016/j.msea.2024.147565

Underwater welding: Evaluation of the structural characteristics of the fusion zone generated in an A36 structural steel welded by FCAW-S

Luis A. Guía-Hernández, Rocío M. Ochoa-Palacios, Patricia S. Costa, Gerardo Altamirano-Guerrero, Perla J. Reséndiz-Hernández and César A. Facusseh-Valerio
The International Journal of Advanced Manufacturing Technology 137 (9-10) 5247 (2025)
https://doi.org/10.1007/s00170-025-15461-7

Three-Dimensional Morphology and Analysis of Widmanstätten Sideplates Ferrite

Shengli Cao, Shaowen Wu, Caijun Zhang and Qingjun Zhang
Metals 12 (3) 523 (2022)
https://doi.org/10.3390/met12030523

Influence of Welding Energy on Intergranular and Pitting Corrosion Susceptibility of UNS S32205 Duplex Stainless-steel Joints

Henrique Boschetti Pereira, Tarcisio Henrique Carvalhaes Pimentel, Carlos Alberto da Silva, Zehbour Panossian and Cesar Roberto Farias de Azevedo
Materials Research 25 ( suppl 1) (2022)
https://doi.org/10.1590/1980-5373-mr-2021-0488

Formation and 3D morphology of interconnected α microstructures in additively manufactured Ti-6Al-4V

Ryan DeMott, Nima Haghdadi, Ziba Gandomkar, Xiaozhou Liao, Simon Ringer and Sophie Primig
Materialia 20 101201 (2021)
https://doi.org/10.1016/j.mtla.2021.101201

Influence of carbon content on the microstructure formation of duplex stainless steels Fe-25Cr-5Ni

Emanuelle Machado Amaral, Katia Cristiane Gandolpho Candioto and Angelo Fernando Padilha
REM - International Engineering Journal 74 (4) 463 (2021)
https://doi.org/10.1590/0370-44672021740011

A comparative study on intrinsic mobility of incoherent and semicoherent interfaces during the austenite to ferrite transformation

Haokai Dong, Yongjie Zhang, Goro Miyamoto, Hao Chen, Zhigang Yang and Tadashi Furuhara
Scripta Materialia 188 59 (2020)
https://doi.org/10.1016/j.scriptamat.2020.07.007

Microstructural and mechanical evaluation of a dissimilar joining between SAE 1020 and AISI 304 steel obtained via ultra-high-frequency-pulsed GTAW

Felipe José dos Santos, Gabriel Benedet Dutra and Tiago Vieira da Cunha
Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 (1) (2019)
https://doi.org/10.1007/s40430-018-1534-5

Effect of Solution Treatment on the Microstructure, Micromechanical Properties, and Kinetic Parameters of the β → α Phase Transformation during Continuous Cooling of Ti-6Al-4V Titanium Alloy

Nabil Kherrouba, Denis Carron, Mabrouk Bouabdallah and Riad Badji
Journal of Materials Engineering and Performance 28 (11) 6921 (2019)
https://doi.org/10.1007/s11665-019-04404-5

Roles of transformation interfaces in the design of advanced high strength steels

Tadashi Furuhara, Yongjie Zhang and Goro Miyamoto
IOP Conference Series: Materials Science and Engineering 580 (1) 012005 (2019)
https://doi.org/10.1088/1757-899X/580/1/012005

Investigations on multi-run metal made of HSLA steel – Heterogeneous microstructure and mechanical properties

Mir Mostafa Hosseinioun, Ghazal Moeini, Casten Konke and Ali Tahaei
Materials Testing 59 (7-8) 661 (2017)
https://doi.org/10.3139/120.111047

Structural Investigation and Control of Multi-Pass Gas-Shielded Flux-Cored Arc Weldments

Alexander Kazakov, Elena Kazakova, Michael Karasev and Dar'ya Lubochko
Materials Performance and Characterization 6 (3) MPC20160035 (2017)
https://doi.org/10.1520/MPC20160035

Metallography of Fe–P–C and Fe–P–C–Si–N Alloys

Yashwant Mehta, Vikram V. Dabhade and Gajanan P. Chaudhari
Metallography, Microstructure, and Analysis 4 (6) 488 (2015)
https://doi.org/10.1007/s13632-015-0233-1

The development of acicular ferrite in reheated Ti–B–Al–N-type steel weld metals containing various levels of aluminium and nitrogen

M. N. Ilman, R. C. Cochrane and G. M. Evans
Welding in the World 59 (4) 565 (2015)
https://doi.org/10.1007/s40194-015-0231-6

Transformation Characteristics of Ferrite/Carbide Aggregate in Continuously Cooled, Low Carbon-Manganese Steels

S. F. Di Martino and G. Thewlis
Metallurgical and Materials Transactions A 45 (2) 579 (2014)
https://doi.org/10.1007/s11661-013-2035-x

In Situ Observation of Phase Transformation in Low-Carbon, Boron-Treated Steels

Di Zhang, Yoshiaki Shintaku, Shuichi Suzuki and Yu-Ichi Komizo
Metallurgical and Materials Transactions A 43 (2) 447 (2012)
https://doi.org/10.1007/s11661-011-0892-8

Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80 steel

M.S. Joo, D.-W. Suh, J.H. Bae and H.K.D.H. Bhadeshia
Materials Science and Engineering: A 546 314 (2012)
https://doi.org/10.1016/j.msea.2012.03.079

Growth behavior of ferrite allotriomorphs nucleated on grain boundary faces in a low carbon steel

X. L. Wan, L. Cheng and K. M. Wu
Metals and Materials International 16 (6) 865 (2010)
https://doi.org/10.1007/s12540-010-1202-5

Phase transformations contributing to the properties of modern steels

H. Bhadeshia
Bulletin of the Polish Academy of Sciences: Technical Sciences 58 (2) 255 (2010)
https://doi.org/10.2478/v10175-010-0024-4

Three-Dimensional Morphology and Growth Behavior of Ferrite Allotriomorphs Formed at Grain Boundary Edges

Xiang-liang Wan, Lin Cheng and Kai-ming Wu
Journal of Iron and Steel Research International 17 (11) 49 (2010)
https://doi.org/10.1016/S1006-706X(10)60169-0

Computational Modeling of Objects Represented in Images

Łukasz Rauch, Łukasz Madej and Bogdan Pawłowski
Lecture Notes in Computer Science, Computational Modeling of Objects Represented in Images 6026 221 (2010)
https://doi.org/10.1007/978-3-642-12712-0_20

Characterization of the Microstructure, Crystallographic Texture and Segregation of an As‐cast Duplex Stainless Steel Slab

Clara Herrera, Dirk Ponge and Dierk Raabe
steel research international 79 (6) 482 (2008)
https://doi.org/10.1002/srin.200806156

Serial Sectioning and 3D-reconstruction of Ferrite Allotriomorphs Nucleated at Grain Boundary Faces in an Fe–C–Mn Alloy

L. Cheng, Z. G. Li and K. M. Wu
ISIJ International 48 (6) 830 (2008)
https://doi.org/10.2355/isijinternational.48.830

Crystallographic and morphological relationships between β phase and the Widmanstätten and allotriomorphic α phase at special β grain boundaries in an α/β titanium alloy

D. Bhattacharyya, G.B. Viswanathan and Hamish L. Fraser
Acta Materialia 55 (20) 6765 (2007)
https://doi.org/10.1016/j.actamat.2007.08.029

A Study of Diffusion- and Interface-Controlled Migration of the Austenite/Ferrite Front during Austenitization of a Case-Hardenable Alloy Steel

Eric D. Schmidt, E. Buddy Damm and Seetharaman Sridhar
Metallurgical and Materials Transactions A 38 (2) 244 (2007)
https://doi.org/10.1007/s11661-006-9029-x

Orientation relationships associated with austenite formation from ferrite in a coarse-grained duplex stainless steel

E. F. Monlevade and I. G. S. Falleiros
Metallurgical and Materials Transactions A 37 (3) 939 (2006)
https://doi.org/10.1007/s11661-006-0067-1

Lath boundary thin-film martensite in acicular ferrite ultralow carbon pipeline steels

Ming-Chun Zhao, Toshihiro Hanamura, Hai Qiu and Ke Yang
Materials Science and Engineering: A 395 (1-2) 327 (2005)
https://doi.org/10.1016/j.msea.2004.12.041

New insights into the widmanstätten proeutectoid ferrite transformation: Integration of crystallographic and three-dimensional morphological observations

G. Spanos, A. W. Wilson and M. V. Kral
Metallurgical and Materials Transactions A 36 (5) 1209 (2005)
https://doi.org/10.1007/s11661-005-0213-1

Three-dimensional analysis and classification of grain-boundary-nucleated proeutectoid ferrite precipitates

M. V. Kral and G. Spanos
Metallurgical and Materials Transactions A 36 (5) 1199 (2005)
https://doi.org/10.1007/s11661-005-0212-2

In situ observations of Widmanstätten ferrite formation in a low-carbon steel

Dominic Phelan, Nicole Stanford and Rian Dippenaar
Materials Science and Engineering: A 407 (1-2) 127 (2005)
https://doi.org/10.1016/j.msea.2005.07.015

Coupled-solute drag effects on ferrite formation in Fe-C-X systems

H. I. Aaronson, W. T. Reynolds and G. R. Purdy
Metallurgical and Materials Transactions A 35 (4) 1187 (2004)
https://doi.org/10.1007/s11661-004-0294-2

Continuous cooling transformation of undeformed and deformed low carbon pipeline steels

Ming-Chun Zhao, Ke Yang, Fu-Ren Xiao and Yi-Yin Shan
Materials Science and Engineering: A 355 (1-2) 126 (2003)
https://doi.org/10.1016/S0921-5093(03)00074-1

Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels

P. Cizek, B. P. Wynne, C. H. J. Davies, B. C. Muddle and P. D. Hodgson
Metallurgical and Materials Transactions A 33 (5) 1331 (2002)
https://doi.org/10.1007/s11661-002-0059-8

Three-dimensional observations of proeutectoid cementite precipitates at short isothermal transformation times

C.-Y Hung, G Spanos, R.O Rosenberg and M.V Kral
Acta Materialia 50 (15) 3781 (2002)
https://doi.org/10.1016/S1359-6454(02)00170-2

Modeling of kinetics of isothermal idiomorphic ferrite formation in a medium-carbon vanadium-titanium microalloyed steel

C. Capdevila, F. G. Caballero and C. García de Andrés
Metallurgical and Materials Transactions A 32 (7) 1591 (2001)
https://doi.org/10.1007/s11661-001-0137-3

Modeling of kinetics of austenite-to-allotriomorphic ferrite transformation in 0.37C-1.45Mn-0.11V microalloyed steel

C. Capdevila, F. G. Caballero and C. García de Andrés
Metallurgical and Materials Transactions A 32 (3) 661 (2001)
https://doi.org/10.1007/s11661-001-0082-1

Modeling of kinetics of austenite-to-allotriomorphic ferrite transformation in 0.37C-1.45Mn-0.11V microalloyed steel

C. Capdevila, F. G. Caballero and C. García de Andrés
Metallurgical and Materials Transactions A 32 (13) 661 (2001)
https://doi.org/10.1007/s11661-001-1001-1

Iron–phosphorus–carbon system: Part 3 – Metallography of low carbon iron–phosphorus alloys

J.W. Stewart, J.A. Charles and E.R. Wallach
Materials Science and Technology 16 (3) 291 (2000)
https://doi.org/10.1179/026708300101507857

The effect of cooling rate on the microstructures formed during solidification of ferritic steel

N. H. Pryds and X. Huang
Metallurgical and Materials Transactions A 31 (12) 3155 (2000)
https://doi.org/10.1007/s11661-000-0095-1

Microstructural evolution in ultra-low-carbon steel weldments—Part I: Controlled thermal cycling and continuous cooling transformation diagram of the weld metal

R. W. Fonda and G. Spanos
Metallurgical and Materials Transactions A 31 (9) 2145 (2000)
https://doi.org/10.1007/s11661-000-0132-0

Correlation between the crystallography and morphology of proeutectoid Widmanstätten cementite precipitates

M.A Mangan, M.V Kral and G Spanos
Acta Materialia 47 (17) 4263 (1999)
https://doi.org/10.1016/S1359-6454(99)00323-7

Examination of Microstructures and Microanalysis of an Fe-9% Ni Alloy

S. H. Chong, A. Sayles, R. Keyse, J. D. Atkinson and E. A. Wilson
Materials Transactions, JIM 39 (1) 179 (1998)
https://doi.org/10.2320/matertrans1989.39.179

Toward the overthrow of half of a major paradigm for interfacial structure deduction, with special attention to the massive transformation in Ti-46.5 A/O Al alloy

J.F. Nie, B.C. Muddle, T. Furuhara and H.I. Aaronson
Scripta Materialia 39 (4-5) 637 (1998)
https://doi.org/10.1016/S1359-6462(98)00208-5

Modelling of isothermal ferrite formation using an analytical treatment of soft impingement in 0.37C–1.45Mn–0.11V microalloyed steel

C. Garcı́a de Andrés, C. Capdevila, F.G. Caballero and H.K.D.H. Bhadeshia
Scripta Materialia 39 (7) 853 (1998)
https://doi.org/10.1016/S1359-6462(98)00271-1

Observation of the Surface Relief Effects Associated with WidmanstLtten Sawteeth by Scanning Tunneling Microscopy

Fang Hong-Sheng
Journal of Materials Science Letters 17 (11) 957 (1998)
https://doi.org/10.1023/A:1026433210843

The Theory of Diffusional Phase Transformations and Microstructure 1 1Editor's Note. This article is an important paper taken from the 1971 Symposium Program of the International Metallographic Society. Furthermore, this paper is judged as an outstanding contribution to the field of metallography and, for this reason, it is presented at this time in its original and unabridged form.

GARY R. PURDY
Materials Characterization 39 (2-5) 261 (1997)
https://doi.org/10.1016/S1044-5803(97)00133-2

Review of temperature indicators and the use of duplex stainless steels for life assessment

C.H. Shek, K.W. Wong and J.K.L. Lai
Materials Science and Engineering: R: Reports 19 (5-6) 153 (1997)
https://doi.org/10.1016/S0927-796X(97)00001-6

Growth kinetics of ϵ phase plates in the ζ phase of a Ag-20.51 at% Sn alloy

Waldir Gárlipp, Mario Cilense and Luis Carlos Teixeira do Prado
Scripta Materialia 34 (8) 1237 (1996)
https://doi.org/10.1016/1359-6462(95)00653-2

Phase Transformations in Nb-Al-Ti alloys

E. S. K. Menon, P. R. Subramanian and D. M. Dimiduk
Metallurgical and Materials Transactions A 27 (6) 1647 (1996)
https://doi.org/10.1007/BF02649822

The formation mechanism(s), morphology, and crystallography of ferrite sideplates

G. Spanos and M. G. Hall
Metallurgical and Materials Transactions A 27 (6) 1519 (1996)
https://doi.org/10.1007/BF02649812

Continuous cooling transformation kinetics versus isothermal transformation kinetics of steels: a phenomenological rationalization of experimental observations

Ji-Cheng Zhao and Michael R. Notis
Materials Science and Engineering: R: Reports 15 (4-5) 135 (1995)
https://doi.org/10.1016/0927-796X(95)00183-2

Microstructural changes in HSLA-100 steel thermally cycled to simulate the heat-affected zone during welding

G. Spanos, R. W. Fonda, R. A. Vandermeer and A. Matuszeski
Metallurgical and Materials Transactions A 26 (12) 3277 (1995)
https://doi.org/10.1007/BF02669455

Effects of austenite grain size and cooling rate on Widmanstätten ferrite formation in low-alloy steels

R. L. Bodnar and S. S. Hansen
Metallurgical and Materials Transactions A 25 (4) 665 (1994)
https://doi.org/10.1007/BF02665443

A history of the controversy over the roles of shear and diffusion in plate formation aboveM d and a comparison of the atomic mechanisms of these processes

H. I. Aaronson and M. G. Hall
Metallurgical and Materials Transactions A 25 (9) 1797 (1994)
https://doi.org/10.1007/BF02649030

Atomic mechanisms of diffusional nucleation and growth and comparisons with their counterparts in shear transformations

Hubert I. Aaronson
Metallurgical Transactions A 24 (2) 241 (1993)
https://doi.org/10.1007/BF02657313

Acicular ferrite transformation in alloy-steel weld metals

J. R. Yang and H. K. D. H. Bhadeshia
Journal of Materials Science 26 (3) 839 (1991)
https://doi.org/10.1007/BF00588325

Crystallography and interfacial structure of proeutectoid α grain boundary allotriomorphs in a hypoeutectoid TiCr alloy

T. Furuhara and H.I. Aaronson
Acta Metallurgica et Materialia 39 (11) 2887 (1991)
https://doi.org/10.1016/0956-7151(91)90105-A

The Growth Kinetics and Shape Evolution of Precipitates Growing by the Ledge Mechanism

Masato Enomoto, George Spanos and Robert A. Masumura
MRS Proceedings 237 (1991)
https://doi.org/10.1557/PROC-237-119

Computer simulation of morphological changes of grain boundary precipitates growing by the ledge mechanism

Masato Enomoto
Metallurgical Transactions A 22 (6) 1235 (1991)
https://doi.org/10.1007/BF02660655

Influence of carbon concentration and reaction temperature upon bainite morphology in Fe-C-2 Pct Mn alloys

G. Spanos, H. S. Fang, D. S. Sarma and H. I. Aaronson
Metallurgical Transactions A 21 (6) 1391 (1990)
https://doi.org/10.1007/BF02672559

Interphase boundary structures associated with diffusional phase transformations in Ti-base alloys

T. Furuhara, H. J. Lee, E. S. K. Menon and H. I. Aaronson
Metallurgical Transactions A 21 (6) 1627 (1990)
https://doi.org/10.1007/BF02672578

Bainite viewed three different ways

H. I. Aaronson, W. T. Reynolds, G. J. Shiflet and G. Spanos
Metallurgical Transactions A 21 (6) 1343 (1990)
https://doi.org/10.1007/BF02672557

The Incomplete transformation phenomenon in Fe-C-Mo alloys

W. T. Reynolds, F. Z. Li, C. K. Shui and H. I. Aaronson
Metallurgical Transactions A 21 (6) 1433 (1990)
https://doi.org/10.1007/BF02672561

Overall reaction kinetics and morphology of austenite decomposition between the upper nose and the Ms of a hypoeutectoid Fe-C-Cr alloy

H. Goldenstein and H. I. Aaronson
Metallurgical Transactions A 21 (6) 1465 (1990)
https://doi.org/10.1007/BF02672562

The widmanstatten-start (Ws) temperature, as affected by matrix grain size, in TI-6% Al-4% V and in FeC alloys

H.I. Aaronson, D. Eylon, C.M. Cooke, M. Enomoto and F.H. Froes
Scripta Metallurgica 23 (3) 435 (1989)
https://doi.org/10.1016/0036-9748(89)90397-9

Influence of prior microstructure on normalising response of C–Mn–Al–Nb steels

R. C. Cochrane, B. Mintz and J. L. Ward
Materials Science and Technology 5 (1) 20 (1989)
https://doi.org/10.1179/mst.1989.5.1.20