Fabrication ct propriétés d’aciers ferritiques renforcés par dispersion
Rev. Met. Paris, 65 12 (1968) 863-869
Published online: 2017-03-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
The Irradiation Effects in Ferritic, Ferritic–Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review
Natália Luptáková, Jiří Svoboda, Denisa Bártková, Adam Weiser and Antonín DlouhýMaterials 17 (14) 3409 (2024)
https://doi.org/10.3390/ma17143409
Processing window for hot consolidation by rolling and rotary swaging of Fe-10Al-4Cr-4Y2O3 ODS nanocomposite
J. Svoboda, R. Kocich, Š. Gamanov, L. Kunčická, N. Luptáková and P. DymáčekMaterials Today Communications 34 105393 (2023)
https://doi.org/10.1016/j.mtcomm.2023.105393
Mechanisms of plastic deformation and fracture in coarse grained Fe–10Al–4Cr–4Y2O3 ODS nanocomposite at 20–1300°C
Š. Gamanov, N. Luptáková, P. Bořil, M. Jarý, B. Mašek, P. Dymáček and J. SvobodaJournal of Materials Research and Technology 24 4863 (2023)
https://doi.org/10.1016/j.jmrt.2023.04.131
The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y2O3 ODS Nanocomposite
Jiří Svoboda, Štepán Gamanov, Denisa Bártková, Natália Luptáková, Petr Bořil, Milan Jarý, Bohuslav Mašek, Jakub Holzer and Petr DymáčekMaterials 15 (24) 9034 (2022)
https://doi.org/10.3390/ma15249034
Fissile core and Tritium-Breeding Blanket: structural materials and their requirements
Jean-Louis Boutard, Ana Alamo, Rainer Lindau and Michael RiethComptes Rendus Physique 9 (3-4) 287 (2008)
https://doi.org/10.1016/j.crhy.2007.11.004
Oxide dispersion-strengthened steels: A comparison of some commercial and experimental alloys
R.L. Klueh, J.P. Shingledecker, R.W. Swindeman and D.T. HoelzerJournal of Nuclear Materials 341 (2-3) 103 (2005)
https://doi.org/10.1016/j.jnucmat.2005.01.017
https://doi.org/10.1520/MONO10033M
Creep behaviour of ODS steels
C. Zakine, C. Prioul and D. FrançoisMaterials Science and Engineering: A 219 (1-2) 102 (1996)
https://doi.org/10.1016/S0921-5093(96)10415-9
Wrought Fe-Cr-Al alloys
Zh. I. Dzneladze, V. F. Lykova, R. P. Shchegoleva, V. G. Bakalinskii and A. A. KiselevSoviet Powder Metallurgy and Metal Ceramics 20 (5) 343 (1981)
https://doi.org/10.1007/BF00791667
Strength anisotropy in extruded copper-alumina bars
R. Garvin-Salazar, M. Brabers and E. AernoudtMaterials Science and Engineering 26 (2) 251 (1976)
https://doi.org/10.1016/0025-5416(76)90012-4
Irradiation embrittlement and creep in fuel cladding and core components
van Asbroeck, W. Vandermeulen, M. Snykers and J.-J. HuetIrradiation embrittlement and creep in fuel cladding and core components 176 (1973)
https://doi.org/10.1680/ieacifcacc.48748.0022
The cylindrically ordered packing of equal spheres
F.A. RockePowder Technology 4 (4) 180 (1971)
https://doi.org/10.1016/0032-5910(71)80033-5