Considérations économiques et techniques sur l’emploi des réfractaires en sidérurgie
Rev. Met. Paris, 70 5 (1973) 397-410
Published online: 2017-03-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Intergranular Corrosion of 316L Stainless Steel by Aging and UNSM (Ultrasonic Nano-crystal Surface Modification) treatment
J.H. Lee and Y.S. KimCorrosion Science and Technology 14 (6) 313 (2015)
https://doi.org/10.14773/cst.2015.14.6.313
Grain boundary engineering of austenitic steel PNC316 for use in nuclear reactors
M. Sekine, N. Sakaguchi, M. Endo, H. Kinoshita, S. Watanabe, H. Kokawa, S. Yamashita, Y. Yano and M. KawaiJournal of Nuclear Materials 414 (2) 232 (2011)
https://doi.org/10.1016/j.jnucmat.2011.03.049
Evolution of grain-boundary character distribution during iterative processing of an austenitic stainless steel
Sandip Ghosh Chowdhury, Pankaj Kumar, Arpan Das, et al.Philosophical Magazine Letters 88 (6) 407 (2008)
https://doi.org/10.1080/09500830802108460
Twin-induced grain boundary engineering for 316 austenitic stainless steel
M. Michiuchi, H. Kokawa, Z.J. Wang, Y.S. Sato and K. SakaiActa Materialia 54 (19) 5179 (2006)
https://doi.org/10.1016/j.actamat.2006.06.030
Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering
M Shimada, H Kokawa, Z.J Wang, Y.S Sato and I KaribeActa Materialia 50 (9) 2331 (2002)
https://doi.org/10.1016/S1359-6454(02)00064-2
Grain-boundary structure and precipitation in sensitized austenitic stainless steel
Hiroyuki Kokawa, Masayuki Shimada and Yutaka S. SatoJOM 52 (7) 34 (2000)
https://doi.org/10.1007/s11837-000-0159-0
Sink effect of grain boundary on radiation-induced segregation in austenitic stainless steel
S. Watanabe, Y. Takamatsu, N. Sakaguchi and H. TakahashiJournal of Nuclear Materials 283-287 152 (2000)
https://doi.org/10.1016/S0022-3115(00)00204-X
Grain boundary character, and carbide size and spatial distribution in a ternary nickel alloy
Hongwei Liu, Ming Gao, David G. Harlow and Robert P. WeiScripta Metallurgica et Materialia 32 (11) 1807 (1995)
https://doi.org/10.1016/0956-716X(95)00015-N
Grain boundary precipitation of bcc precipitates in CuFeCo alloy bicrystals
Ryoichi Monzen and Kazuo KitagawaScripta Metallurgica 22 (2) 173 (1988)
https://doi.org/10.1016/S0036-9748(88)80328-4
Precipitation at grain boundaries in the commercial alloy Al 7075
J.K. Park and A.J. ArdellActa Metallurgica 34 (12) 2399 (1986)
https://doi.org/10.1016/0001-6160(86)90143-4
Characterization of [001] tilt boundaries in bicrystalline thin films of copper
P. M. Kluge-Weiss and C. L. BauerPhysica Status Solidi (a) 58 (2) 333 (1980)
https://doi.org/10.1002/pssa.2210580202
Influence of angle between grain boundary and precipitate habit plane on intergranular morphology of θ′ in Al-Cu
B. Forest and M. BiscondiMetal Science 12 (4) 202 (1978)
https://doi.org/10.1179/msc.1978.12.4.202
In situ observations of the nucleation and initial growth of grain boundary precipitates in an Al-Zn-Mg alloy
E.P. Butler and P.R. SwannActa Metallurgica 24 (4) 343 (1976)
https://doi.org/10.1016/0001-6160(76)90009-2