Influence de la teneur en bore sur la tendance à la fissuration à chaud dans les zones affectées par le soudage d'aciers inoxydables 18-10
Rev. Met. Paris, 71 12 (1974) 917-930
Published online: 2017-03-06
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Characterization of eutectic borides formed during solidification of borated stainless steel 304B4
M. Divya, S. K. Albert and V. Thomas PaulWelding in the World 63 (6) 1681 (2019)
https://doi.org/10.1007/s40194-019-00786-1
Effect of Boron Content on Hot Ductility and Hot Cracking Susceptibility in 316L Austenitic Stainless Steel for Welding Components
G. Tran Van, D. Carron, P. Le Masson, et al.Journal of Materials Engineering and Performance 27 (10) 5114 (2018)
https://doi.org/10.1007/s11665-018-3640-z
Fusion zone and heat affected zone cracking susceptibility of stabilised austenitic stainless steels
V. Shankar, T. P. S. Gill, S. L. Mannan and S. SundaresanScience and Technology of Welding and Joining 3 (1) 17 (1998)
https://doi.org/10.1179/stw.1998.3.1.17
Advances in Fracture Research
WJ PLUMBRIDGEAdvances in Fracture Research 167 (1997)
https://doi.org/10.1016/B978-0-08-042820-8.50021-2
Preplastic strain effect on chromium carbides precipitation of type 316 stainless steel during high-temperature ageing
X. Mao and W. ZhaoJournal of Materials Science Letters 11 (9) 585 (1992)
https://doi.org/10.1007/BF00728616
Pre-plastic deformation and subsequent ageing effect on low-temperature (?196 �C) tensile properties of type 316 stainless steel
X. Mao and W. ZhaoJournal of Materials Science Letters 11 (16) 1137 (1992)
https://doi.org/10.1007/BF00730856
Ausscheidungsverhalten des titanstabilisierten austenitischen stahls 15% Cr-15% Ni-1% Mo-Ti-B (Din-werkstoff-nr. 1.4970)
A.F Padilha, G Schanz and K AnderkoJournal of Nuclear Materials 105 (1) 77 (1982)
https://doi.org/10.1016/0022-3115(82)90454-8