Mesure en continu des dimensions de ronds laminés à chaud
Rev. Met. Paris, 78 4 (1981) 309-318
Published online: 2017-02-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
EBSD investigation of Al/(Al13Fe4+Al2O3) nanocomposites fabricated by mechanical milling and friction stir processing
GHASEM AZIMI‐ROEEN, SEYED FARSHID KASHANI‐BOZORG, MARTIN NOSKO and LUBOMIR OROVCIKJournal of Microscopy 270 (1) 3 (2018)
https://doi.org/10.1111/jmi.12642
Strain Softening of Aluminum in Shear at Elevated Temperature
Michael E. Kassner and Roya ErmaganMaterials Science Forum 941 1490 (2018)
https://doi.org/10.4028/www.scientific.net/MSF.941.1490
The limitations of continuous dynamic recrystallization (CDRX) of aluminium alloys
Julian DriverMaterials Letters 222 135 (2018)
https://doi.org/10.1016/j.matlet.2018.03.196
Large-Strain Softening of Aluminum in Shear at Elevated Temperature: Influence of Dislocation Climb
M. E. Kassner, C. S. Campbell and R. ErmaganMetallurgical and Materials Transactions A 48 (9) 3971 (2017)
https://doi.org/10.1007/s11661-017-4166-y
A review of dynamic recrystallization phenomena in metallic materials
K. Huang and R.E. LogéMaterials & Design 111 548 (2016)
https://doi.org/10.1016/j.matdes.2016.09.012
Fundamentals of Creep in Metals and Alloys
Fundamentals of Creep in Metals and Alloys 301 (2015)https://doi.org/10.1016/B978-0-08-099427-7.16001-3
Effect of equivalent strain and redundant shear strain on microstructure and texture evolution during hot rolling in Mg–3Al–1Zn alloys
Lili Guo and Fumio FujitaJournal of Materials Science 47 (17) 6213 (2012)
https://doi.org/10.1007/s10853-012-6522-z
Hot Deformation and Processing of Aluminum Alloys
Manufacturing Engineering and Materials Processing, Hot Deformation and Processing of Aluminum Alloys 20111578 53 (2011)https://doi.org/10.1201/b11227-4
https://doi.org/10.1201/b11227-6
Hot Deformation and Processing of Aluminum Alloys
Manufacturing Engineering and Materials Processing, Hot Deformation and Processing of Aluminum Alloys 20111578 87 (2011)https://doi.org/10.1201/b11227-5
Effect of the heat treatment prior to extrusion on the direct hot-extrusion of aluminium powder compacts
C. Zubizarreta, S. Giménez, J.M. Martín and I. IturrizaJournal of Alloys and Compounds 467 (1-2) 191 (2009)
https://doi.org/10.1016/j.jallcom.2007.12.035
Microstructure history effect during sequential thermomechanical processing
Reza S. Yassar, John Murphy, Christina Burton, et al.Materials Science and Engineering: A 494 (1-2) 52 (2008)
https://doi.org/10.1016/j.msea.2007.11.087
Fundamentals of Creep in Metals and Alloys
Fundamentals of Creep in Metals and Alloys 261 (2008)https://doi.org/10.1016/B978-0-08-047561-5.00012-9
Precipitation and grain refinement in a 2195 Al friction stir weld
R. W. Fonda and J. F. BingertMetallurgical and Materials Transactions A 37 (12) 3593 (2006)
https://doi.org/10.1007/s11661-006-1054-2
Measurement of flow stress at high temperature in solid torsion tests
B. Roebuck, M.S. Loveday, Y. Chastel, G. Fiorucci and T. Dal NegroMaterials at High Temperatures 23 (2) 119 (2006)
https://doi.org/10.1179/mht.2006.007
Fundamentals of Creep in Metals and Alloys
Fundamentals of Creep in Metals and Alloys 243 (2004)https://doi.org/10.1016/B978-008043637-1/50012-0
A model of continuous dynamic recrystallization
S. Gourdet and F. MontheilletActa Materialia 51 (9) 2685 (2003)
https://doi.org/10.1016/S1359-6454(03)00078-8
Substructure development in hot plane strain compressed Al-1%Mn crystals
J.Ch. Glez and J.H. DriverActa Materialia 51 (10) 2989 (2003)
https://doi.org/10.1016/S1359-6454(03)00111-3
(2003)
https://doi.org/10.1002/3527600434.eap388
The generation of new high-angle boundaries in aluminium during hot torsion
M.R. Barnett and F. MontheilletActa Materialia 50 (9) 2285 (2002)
https://doi.org/10.1016/S1359-6454(02)00048-4
Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization
M. R. Barnett, G. L. Kelly and P. D. HodgsonMetallurgical and Materials Transactions A 33 (7) 1893 (2002)
https://doi.org/10.1007/s11661-002-0022-8
Large-strain softening of aluminum in shear at elevated temperature
M. E. Kassner, M. Z. Wang, M. -T. Perez-Prado and S. AlhajeriMetallurgical and Materials Transactions A 33 (10) 3145 (2002)
https://doi.org/10.1007/s11661-002-0300-5
Influence of Purity on the Dynamic Recrystallization of Metals and Alloys
F. Montheillet and J. Le Cozephysica status solidi (a) 189 (1) 51 (2002)
https://doi.org/10.1002/1521-396X(200201)189:1<51::AID-PSSA51>3.0.CO;2-M
A framework for modeling creep in pure metals
Holger Brehm and Glenn S. DaehnMetallurgical and Materials Transactions A 33 (2) 363 (2002)
https://doi.org/10.1007/s11661-002-0097-2
Nucleation of new grains during discontinuous dynamic recrystallization of 99.998 mass% Aluminum at 453 K
H. Yamagata, Y. Ohuchida, N. Saito and M. OtsukaScripta Materialia 45 (9) 1055 (2001)
https://doi.org/10.1016/S1359-6462(01)01139-3
Dynamic recovery: sufficient mechanism in the hot deformation of Al (<99.99)
H.J McQueen and W BlumMaterials Science and Engineering: A 290 (1-2) 95 (2000)
https://doi.org/10.1016/S0921-5093(00)00933-3
Five-power-law creep in single phase metals and alloys
M.E Kassner and M.-T Pérez-PradoProgress in Materials Science 45 (1) 1 (2000)
https://doi.org/10.1016/S0079-6425(99)00006-7
An experimental study of the recrystallization mechanism during hot deformation of aluminium
S Gourdet and F MontheilletMaterials Science and Engineering: A 283 (1-2) 274 (2000)
https://doi.org/10.1016/S0921-5093(00)00733-4
Improved Microstructures and Mechanical Properties of 2024 Aluminum Alloy Produced by a Reciprocating Extrusion Method
Shi-Ying Yuan, Jien-Wei Yeh and Chun-Huei TsauMaterials Transactions, JIM 40 (3) 233 (1999)
https://doi.org/10.2320/matertrans1989.40.233
Current issues in recrystallization: a review
R.D. Doherty, D.A. Hughes, F.J. Humphreys, et al.Materials Science and Engineering: A 238 (2) 219 (1997)
https://doi.org/10.1016/S0921-5093(97)00424-3
Application of hot workability studies to extrusion processing: Part II. Microstructural development and extrusion of Al, Al-Mg, AND Al-Mg-Mn Alloys
H MCQUEEN and O CELLIERSCanadian Metallurgical Quarterly 35 (4) 305 (1996)
https://doi.org/10.1016/S0008-4433(96)00011-0
Comparative hot workability of 7012 and 7075 alloys after different pretreatments
E. Cerri, E. Evangelista, A. Forcellese and H.J. McQueenMaterials Science and Engineering: A 197 (2) 181 (1995)
https://doi.org/10.1016/0921-5093(94)09714-3
Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery
H. J. McQueen, E. Evangelista, N. Jin and M. E. KassnerMetallurgical and Materials Transactions A 26 (7) 1757 (1995)
https://doi.org/10.1007/BF02670763
Dynamic recrystallization and dynamic recovery in pure aluminum at 583K
H. YamagataActa Metallurgica et Materialia 43 (2) 723 (1995)
https://doi.org/10.1016/0956-7151(94)00267-L
Metal forming: Industrial, mechanical computational and microstructural
H.J. McQueenJournal of Materials Processing Technology 37 (1-4) 3 (1993)
https://doi.org/10.1016/0924-0136(93)90078-K
Static recrystallisation kinetics of commercial aluminium: influence of hot deformation mode
S. Martin, I. Gutierrez and J. J. UrcolaMaterials Science and Technology 9 (10) 874 (1993)
https://doi.org/10.1179/mst.1993.9.10.874
Microstructural evolution of single-crystalline aluminum during multipeak stress oscillation at 623 K
H. Yamagata and Yamaha Motor Co., Ltd.Scripta Metallurgica et Materialia 27 (9) 1157 (1992)
https://doi.org/10.1016/0956-716X(92)90591-2
The effects of temperature and strain rate on extended ductility of aluminum
M.E. Kassner, N.Q. Nguyen, G.A. Henshall and H.J. McQueenMaterials Science and Engineering: A 132 97 (1991)
https://doi.org/10.1016/0921-5093(91)90366-U
Evolution of flow stress in aluminium during ultra-high straining at elevated temperatures. Part II
H. J. McQueen, J. K. Solberg, N. Ryum and E. NesPhilosophical Magazine A 60 (4) 473 (1989)
https://doi.org/10.1080/01418618908213873
Influence of ultra-high strains at elevated temperatures on the microstructure of aluminium. Part I
J. K. Solberg, H. J. McQueen, N. Ryum and E. NesPhilosophical Magazine A 60 (4) 447 (1989)
https://doi.org/10.1080/01418618908213872
Large-strain torsional deformation in aluminum at elevated temperatures
M.E. Kassner, M.M. Myshlyaev and H.J. McQueenMaterials Science and Engineering: A 108 45 (1989)
https://doi.org/10.1016/0921-5093(89)90405-X
Substructures in aluminium from dynamic and static recovery
H. J. McQueen and E. EvangelistaCzechoslovak Journal of Physics 38 (4) 359 (1988)
https://doi.org/10.1007/BF01605405
The dislocation microstructure of aluminum Deformed to Very Large Steady-State Creep Strains
M. E. Kassner and M. E. McMahonMetallurgical Transactions A 18 (5) 835 (1987)
https://doi.org/10.1007/BF02646925
Low energy dislocation structures in highly deformed materials
J. Gil Sevillano and E. AernoudtMaterials Science and Engineering 86 35 (1987)
https://doi.org/10.1016/0025-5416(87)90441-1
The development of microstructure in Al-5% Mg during high temperature deformation
M.R. Drury and F.J. HumphreysActa Metallurgica 34 (11) 2259 (1986)
https://doi.org/10.1016/0001-6160(86)90171-9
Microstructural evolution in Al deformed to strains of 60 at 400°C
H.J. McQueen, O. Knustad, N. Ryum and J.K. SolbergScripta Metallurgica 19 (1) 73 (1985)
https://doi.org/10.1016/0036-9748(85)90268-6