Étude de la plasticité d’inclusions d’oxydes
Rev. Met. Paris, 78 5 (1981) 421-434
Published online: 2017-02-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of Na2O upon Al2O3-SiO2-CaO inclusions: Property calculation and structural analysis
Zhengtao Li, Wen Yang, Pei Zhu and Lifeng ZhangCeramics International 51 (3) 3607 (2025)
https://doi.org/10.1016/j.ceramint.2024.11.336
665 (2025)
https://doi.org/10.1007/978-981-97-9638-0_26
Formation Mechanism of Near‐Surface Defects in Crankshaft Induced by Chain‐Like Al2O3 Inclusions
Jian Zhao, Jinlong Lu, Guoguang Cheng, Tao Zhang, Daohua Bao, Guanbo Wang, Hu Long, Chenghong Zhou and Zhongzhong Xunsteel research international (2025)
https://doi.org/10.1002/srin.202500320
Insights into Glass-Forming Ability and Elastic Modulus of Al2O3-SiO2-CaO Inclusion-Type Oxides from Molecular Dynamics and Thermodynamic Calculation
Zhengtao Li, Wen Yang, Rongzhen Mo and Lifeng ZhangMetallurgical and Materials Transactions B 55 (6) 4718 (2024)
https://doi.org/10.1007/s11663-024-03300-1
Effect of low basicity refining slag on evolution and removal of oxide inclusions in 55SiCrA spring steel
Chen Wang, Wei Tang, Jiang-shan Zhang, Jun-xiong Huang, Kun-rui Shen, Jun Chen and Qing LiuJournal of Iron and Steel Research International 30 (9) 1755 (2023)
https://doi.org/10.1007/s42243-023-00941-5
Slag-Steel Reaction and Control of Inclusions in Al Deoxidized Special Steel
Min Jiang and Xinhua WangEngineering Materials, Slag-Steel Reaction and Control of Inclusions in Al Deoxidized Special Steel 1 (2023)
https://doi.org/10.1007/978-981-19-3463-6_1
Source and Transformation of MgO-Based Inclusions in Si-Mn-Killed Steel with Lime-Silicate Slag
Jiaqi Zhao, Jianhua Chu, Xin Liu, Min Wang, Xiaofeng Cai, Han Ma and Yanping BaoMetals 12 (8) 1323 (2022)
https://doi.org/10.3390/met12081323
Effect of basicity on the crystallization behavior of 25 wt.%Al2O3-SiO2-CaO non-metallic inclusion-type oxides
Zhengtao Li, Nan Liu, Wen Yang and Lifeng ZhangJournal of Non-Crystalline Solids 579 121367 (2022)
https://doi.org/10.1016/j.jnoncrysol.2021.121367
Effect of Oxygen at Basic Oxygen Furnace Endpoint on Control of Inclusions in a Si–Mn Killed Steel
Nan Liu, Wen Yang, Lifeng Zhang and Songjie Wusteel research international 93 (2) (2022)
https://doi.org/10.1002/srin.202100411
Inclusion evolution in solid steel during rolling deformation: a review
Yongkun Yang, Dongping Zhan, Guoxing Qiu, Xiaoming Li, Zhouhua Jiang and Huishu ZhangJournal of Materials Research and Technology 18 5103 (2022)
https://doi.org/10.1016/j.jmrt.2022.05.018
Effect of Na2O addition on crystallization behavior and properties of 25 wt%Al2O3–SiO2–CaO non-metallic inclusion-type oxides
Zhengtao Li, Wen Yang, Hao Yao and Lifeng ZhangCeramics International 48 (16) 23849 (2022)
https://doi.org/10.1016/j.ceramint.2022.05.042
Inclusion Engineering in Medium Mn Steels: Effect of Hot-Rolling Process on the Deformation Behaviors of Oxide and Sulfide Inclusions
Yong Wang, Yonggang Yang, Zhihua Dong, et al.Metallurgical and Materials Transactions B 53 (4) 2182 (2022)
https://doi.org/10.1007/s11663-022-02517-2
Deformation of Non-metallic Inclusions in Steel during Rolling Process: A Review
Ying Ren, Wen Yang and Lifeng ZhangISIJ International 62 (11) 2159 (2022)
https://doi.org/10.2355/isijinternational.ISIJINT-2022-235
Experimental and Modeling Study of Deformability of Glassy CaO-(MnO)-Al2O3-SiO2 Inclusions
Qifeng Shu, Chaoge You, Tuomas Alatarvas and Timo Matti Juhani FabritiusMetals 12 (3) 522 (2022)
https://doi.org/10.3390/met12030522
State of the Art in Control of Inclusions and Microalloying Elements in Tire Cord Steel and Saw Wire Steel
Changyong Chen, Meng Sun, Xiaoqing Chen, Bao Wang, Jianan Zhou and Zhouhua Jiangsteel research international 93 (4) (2022)
https://doi.org/10.1002/srin.202100507
Wettability Between Si–Mn‐Killed Steel and MgO‐Based Refractory Containing SiO2 Impurities
Limei Cheng, Ying Ren, Tingyao Liu and Lifeng Zhangsteel research international 93 (5) (2022)
https://doi.org/10.1002/srin.202100703
Effect of Al2O3 on Evolution of Oxide Inclusions in Tire Cord Steel during Hot Rolling
Kaijun Niu and Alberto N. ConejoISIJ International 61 (10) 2605 (2021)
https://doi.org/10.2355/isijinternational.ISIJINT-2021-156
Behaviour of oxide inclusions and sulphur in ‘two-stage basicity control’ refining method of Si-killed spring steel
Chen Wang, Yan-Shen Han, Jiang-Shan Zhang, et al.Ironmaking & Steelmaking 48 (4) 466 (2021)
https://doi.org/10.1080/03019233.2020.1812036
Pinning Effect of Oxide Particles on Grain Boundaries of a Low Aluminum Non‐oriented Electrical Steel
Qiang Ren, Lifeng Zhang and Wen Yangsteel research international 91 (1) (2020)
https://doi.org/10.1002/srin.201900303
Deformation and fracture of non-metallic inclusions in steel at different temperatures
Wen Yang, Kaiyu Peng, Lifeng Zhang and Qiang RenJournal of Materials Research and Technology 9 (6) 15016 (2020)
https://doi.org/10.1016/j.jmrt.2020.10.066
A New Method for Plasticization of Inclusions in Saw-Wire Steel by NaF Addition
Liangjun Chen, Yong Wan, Jie Li, Weiqing Chen, Yindong Yang and Alexander McLeanMetals 10 (6) 704 (2020)
https://doi.org/10.3390/met10060704
Evolution of plasticized MnO-Al2O3-SiO2-based nonmetallic inclusion in 18wt%Cr-8wt%Ni stainless steel and its properties during soaking process
Jing Guo, Xing-run Chen, Shao-wei Han, Yan Yan and Han-jie GuoInternational Journal of Minerals, Metallurgy and Materials 27 (3) 328 (2020)
https://doi.org/10.1007/s12613-019-1945-z
An assessment of cleanliness techniques for low alloyed steel grades
Aurélie Franceschini, Fabienne Ruby-Meyer, Fabien Midroit, et al.Metallurgical Research & Technology 116 (5) 509 (2019)
https://doi.org/10.1051/metal/2018128
State of the Art in the Control of Inclusions in Tire Cord Steels and Saw Wire Steels – A Review
Changyong Chen, Zhouhua Jiang, Yang Li, Lichun Zheng, Xinfeng Huang, Guang Yang, Meng Sun, Kui Chen, Hao Yang, Hao Hu and Huabing Listeel research international 90 (8) (2019)
https://doi.org/10.1002/srin.201800547
The effects of non-metallic inclusions on properties relevant to the performance of steel in structural and mechanical applications
André Luiz Vasconcellos da Costa e SilvaJournal of Materials Research and Technology 8 (2) 2408 (2019)
https://doi.org/10.1016/j.jmrt.2019.01.009
Bend Failure Mechanism of Zinc Coated Advanced High Strength Steel
Dongwei Fan, Pallava Kaushik and Howard PieletISIJ International 58 (8) 1538 (2018)
https://doi.org/10.2355/isijinternational.ISIJINT-2018-132
Effect of Na2CO3 Addition on Inclusions in High-Carbon Steel for Saw Wire
Liangjun Chen, Weiqing Chen, Yang Hu, et al.Transactions of the Indian Institute of Metals 71 (2) 383 (2018)
https://doi.org/10.1007/s12666-017-1168-9
Effect of Magnesium and Calcium Addition on Carbides Characterizations and Anisotropy Ductile Fracture of Inconel 718
Javad Teimouri, Seyed Rahman Hosseini and Khosro FarmaneshMetallography, Microstructure, and Analysis 7 (3) 268 (2018)
https://doi.org/10.1007/s13632-018-0449-y
Deformation Behavior of Inclusion System CaO–Al2O3–SiO2 with Different Compositions During Hot Rolling Processes
Rong Cheng, Jiongming Zhang and Bo WangTransactions of the Indian Institute of Metals 71 (3) 705 (2018)
https://doi.org/10.1007/s12666-017-1203-x
Deformability of Oxide Inclusions in Tire Cord Steels
Lifeng Zhang, Changbo Guo, Wen Yang, Ying Ren and Haitao LingMetallurgical and Materials Transactions B 49 (2) 803 (2018)
https://doi.org/10.1007/s11663-017-1134-2
Effect of Oxide Inclusions on the Magnetic Properties of Non‐Oriented Electrical Steel
Qiang Ren, Lifeng Zhang and Wen Yangsteel research international 89 (12) (2018)
https://doi.org/10.1002/srin.201800047
Effects of K2CO3 Addition on Inclusions in High-Carbon Steel for Saw Wire
Liangjun Chen, Weiqing Chen, Yang Hu, et al.High Temperature Materials and Processes 37 (8) 701 (2018)
https://doi.org/10.1515/htmp-2017-0030
Deformation behavior of MnO13%-Al2O318%-SiO269% inclusion in different steels during hot rolling processes
Rong Cheng, Jiongming Zhang and Bo WangMetallurgical Research & Technology 114 (6) 608 (2017)
https://doi.org/10.1051/metal/2017058
Modeling Manganese Silicate Inclusion Composition Changes during Ladle Treatment Using FactSage Macros
Stephano P.T. Piva, Deepoo Kumar and P. Chris PistoriusMetallurgical and Materials Transactions B 48 (1) 37 (2017)
https://doi.org/10.1007/s11663-016-0764-0
Evolution of Oxide Inclusions in Si-Mn Killed Steels During Hot-Rolling Process
Wen Yang, Changbo Guo, Lifeng Zhang, Haitao Ling and Chao LiMetallurgical and Materials Transactions B 48 (5) 2717 (2017)
https://doi.org/10.1007/s11663-017-1025-6
Laser-induced breakdown spectroscopy and multivariate statistics for the rapid identification of oxide inclusions in steel products
Fabienne Boué-BigneSpectrochimica Acta Part B: Atomic Spectroscopy 119 25 (2016)
https://doi.org/10.1016/j.sab.2016.02.018
Formation Mechanism of CaO-SiO2-Al2O3-(MgO) Inclusions in Si-Mn-Killed Steel with Limited Aluminum Content During the Low Basicity Slag Refining
Kunpeng Wang, Min Jiang, Xinhua Wang, et al.Metallurgical and Materials Transactions B 47 (1) 282 (2016)
https://doi.org/10.1007/s11663-015-0502-z
Study on Control of Inclusion Compositions in Tire Cord Steel by Low Basicity Top Slag
Cai-ping Xin, Feng Yue, Chen-xu Jiang and Qi-fan WuHigh Temperature Materials and Processes 35 (1) 47 (2016)
https://doi.org/10.1515/htmp-2014-0143
115 (2016)
https://doi.org/10.1002/9781119333197.ch12
Structure–property linkages using a data science approach: Application to a non-metallic inclusion/steel composite system
Akash Gupta, Ahmet Cecen, Sharad Goyal, Amarendra K. Singh and Surya R. KalidindiActa Materialia 91 239 (2015)
https://doi.org/10.1016/j.actamat.2015.02.045
Inclusion composition control in tyre cord steel by top slag refining
X. F. He, X. H. Wang, S. H. Chen, et al.Ironmaking & Steelmaking 41 (9) 676 (2014)
https://doi.org/10.1179/1743281214Y.0000000182
Effect of Boron on Morphology of Inclusions in Tire Cord Steel
Huai-zhou Cui and Wei-qing ChenJournal of Iron and Steel Research International 19 (4) 22 (2012)
https://doi.org/10.1016/S1006-706X(12)60082-X
Analysis of Inclusion Microstructure in Material Engineering of Steel
Ding Guo Zhao, Shu Huan Wang and Ming Jian GuoAdvanced Materials Research 568 324 (2012)
https://doi.org/10.4028/www.scientific.net/AMR.568.324
Influence of Deformation Degree on the Evaluation of Macroscopic Oxide Cleanness
Hatto F. Jacobisteel research international 77 (8) 558 (2006)
https://doi.org/10.1002/srin.200606430
Fracture Behavior of Oxide Inclusions during Rolling and Drawing
Sei KIMURA, Ikuo HOSHIKAWA, Nobuhiko IBARAKI, Shigeo HATTORI and Takashi CHODATetsu-to-Hagane 88 (11) 755 (2002)
https://doi.org/10.2355/tetsutohagane1955.88.11_755
Sulphide inclusion effects on tool-wear in high productivity milling of tool steels
G. Poulachon, M. Dessoly, J.L. Lebrun, et al.Wear 253 (3-4) 339 (2002)
https://doi.org/10.1016/S0043-1648(02)00122-9
Crystallization kinetics of Al2O3–CaO–SiO2 based oxide inclusions
P Rocabois, J.N Pontoire, J Lehmann and H GayeJournal of Non-Crystalline Solids 282 (1) 98 (2001)
https://doi.org/10.1016/S0022-3093(01)00332-5
Deformation of inclusions during hot rolling of steels
Chunhui Luo and Ulf StåhlbergJournal of Materials Processing Technology 114 (1) 87 (2001)
https://doi.org/10.1016/S0924-0136(01)00576-3
Control of Inclusion Characteristics in Direct Cast Steel Billets
Martin Gagné and Eric ThibaulttCanadian Metallurgical Quarterly 38 (5) 311 (1999)
https://doi.org/10.1179/cmq.1999.38.5.311
Micromechanisms of tool wear in machining free cutting steels
K. Ramanujachar and S.V. SubramanianWear 197 (1-2) 45 (1996)
https://doi.org/10.1016/0043-1648(95)06810-4
Physico‐chemical aspects of the behaviour of inclusions in steels
Christian Gatellier, Henri Gaye, Jean Lehmann, Jean Noël Pontoire and Paul Victor RiboudSteel Research 64 (1) 87 (1993)
https://doi.org/10.1002/srin.199300987