Étude des mécanismes de déformation et d’adoucissement dynamique des aciers ferritiques Fe-Cr au cours de la déformation à chaud
Rev. Met. Paris, 78 12 (1981) 975-988
Published online: 2017-02-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Microstructure Evolution by Thermomechanical Processing in the Fe-10Al-12V Superalloy
Pedro A. Ferreirós, Abraham A. Becerra, Uriel A. Sterin, et al.Alloys 2 (1) 29 (2023)
https://doi.org/10.3390/alloys2010002
A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure
N. Haghdadi, P. Cizek, H. Beladi and P.D. HodgsonActa Materialia 126 44 (2017)
https://doi.org/10.1016/j.actamat.2016.12.045
The microstructure evolution and softening processes during high-temperature deformation of a 21Cr–10Ni–3Mo duplex stainless steel
P. CizekActa Materialia 106 129 (2016)
https://doi.org/10.1016/j.actamat.2016.01.012
Thermomechanical properties of a spark plasma sintered ZrC–SiC composite obtained by a precursor derived ceramic route
G. Antou, M.D. Ohin, R. Lucas, et al.Materials Science and Engineering: A 643 1 (2015)
https://doi.org/10.1016/j.msea.2015.07.025
Dynamic recrystallization mechanisms of an Fe–8% Al low density steel under hot rolling conditions
C. Castan, F. Montheillet and A. PerladeScripta Materialia 68 (6) 360 (2013)
https://doi.org/10.1016/j.scriptamat.2012.07.037
1 (2013)
https://doi.org/10.1002/9781118557990.ch1
Hot Deformation and Processing of Aluminum Alloys
Manufacturing Engineering and Materials Processing, Hot Deformation and Processing of Aluminum Alloys 20111578 87 (2011)https://doi.org/10.1201/b11227-5
https://doi.org/10.1201/b11227-9
2484 (2009)
https://doi.org/10.5151/2594-5327-15080
EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region
A. Oudin, P.D. Hodgson and M.R. BarnettMaterials Science and Engineering: A 486 (1-2) 72 (2008)
https://doi.org/10.1016/j.msea.2007.09.045
HOT WORKABILITY OF 2304 AND 2205 DUPLEX STAINLESS STEELS
E. EVANGELISTA, H.J. McQUEEN, M. NIEWCZAS and M. CABIBBOCanadian Metallurgical Quarterly 43 (3) 339 (2004)
https://doi.org/10.1179/cmq.2004.43.3.339
Grain size effect on the warm deformation behaviour of a Ti-IF steel
A. Oudin, M.R. Barnett and P.D. HodgsonMaterials Science and Engineering: A 367 (1-2) 282 (2004)
https://doi.org/10.1016/j.msea.2003.10.273
A model of continuous dynamic recrystallization
S. Gourdet and F. MontheilletActa Materialia 51 (9) 2685 (2003)
https://doi.org/10.1016/S1359-6454(03)00078-8
Constitutive analysis in hot working
H.J McQueen and N.D RyanMaterials Science and Engineering: A 322 (1-2) 43 (2002)
https://doi.org/10.1016/S0921-5093(01)01117-0
Elevated-temperature deformation at forming rates of 10−2 to 102 s−1
H. J. McQueenMetallurgical and Materials Transactions A 33 (2) 345 (2002)
https://doi.org/10.1007/s11661-002-0096-3
Dislocation glide and dynamic recrystallization in LiF single crystals
O. Sitdikov and R. KaibyshevMaterials Science and Engineering: A 328 (1-2) 147 (2002)
https://doi.org/10.1016/S0921-5093(01)01691-4
An experimental study of the recrystallization mechanism during hot deformation of aluminium
S Gourdet and F MontheilletMaterials Science and Engineering: A 283 (1-2) 274 (2000)
https://doi.org/10.1016/S0921-5093(00)00733-4
A mechanism of ferrite softening in a duplex stainless steel deformed in hot torsion
P. Cizek and B.P. WynneMaterials Science and Engineering: A 230 (1-2) 88 (1997)
https://doi.org/10.1016/S0921-5093(97)00087-7
Hot working and micro structure in 409 ferritic steel
E.V. Konopleva, M. Sauerborn, H.J. McQueen, N.D. Ryan and R.G. ZaripovaMaterials Science and Engineering: A 234-236 826 (1997)
https://doi.org/10.1016/S0921-5093(97)00337-7
Current issues in recrystallization: a review
R.D. Doherty, D.A. Hughes, F.J. Humphreys, et al.Materials Science and Engineering: A 238 (2) 219 (1997)
https://doi.org/10.1016/S0921-5093(97)00424-3
Formation and Application of Grain Boundary Serrations
H. J. McQueen, N. D. Ryan, E. V. Konopleva and X. XiaCanadian Metallurgical Quarterly 34 (3) 219 (1995)
https://doi.org/10.1179/cmq.1995.34.3.219
Grain and Subgrain Structures Developed by Hot Working in As-Cast 434 Stainless Steel
E. Evangelista,, P. Mengucci,, J. Bowles, and H.J. McQueen,High Temperature Materials and Processes 12 (1-2) 57 (1993)
https://doi.org/10.1515/HTMP.1993.12.1-2.57
Influence of ultra-high strains at elevated temperatures on the microstructure of aluminium. Part I
J. K. Solberg, H. J. McQueen, N. Ryum and E. NesPhilosophical Magazine A 60 (4) 447 (1989)
https://doi.org/10.1080/01418618908213872
Effect of changing strain rate on stress-strain behaviour during high temperature deformation
J.J. Urcola and C.M. SellarsActa Metallurgica 35 (11) 2637 (1987)
https://doi.org/10.1016/0001-6160(87)90263-X
Hot Workability of Metals and Alloys
H. J. McQueen and D. L. BourellJOM 39 (9) 28 (1987)
https://doi.org/10.1007/BF03257647
Low energy dislocation structures in highly deformed materials
J. Gil Sevillano and E. AernoudtMaterials Science and Engineering 86 35 (1987)
https://doi.org/10.1016/0025-5416(87)90441-1
Thermomechanical processing of iron, titanium, and zirconium alloys in the bcc structure
D. L. Bourell and H. J. McQueenJournal of Materials Shaping Technology 5 (1) 53 (1987)
https://doi.org/10.1007/BF02833686
Relation between axial stresses and texture development during torsion testing: A simplified theory
F. Montheillet, P. Gilormini and J.J. JonasActa Metallurgica 33 (4) 705 (1985)
https://doi.org/10.1016/0001-6160(85)90035-5
Recent advances in hot working: Fundamental dynamic softening mechanisms
H. J. Mcqueen and J. J. JonasJournal of Applied Metalworking 3 (3) 233 (1984)
https://doi.org/10.1007/BF02833651