Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Continuous casting for tomorrow : Near-Net Shape Casting

J.P. Birat

Rev. Met. Paris, 86 4 (1989) 317-334

Published online: 2017-02-08

DOI: https://doi.org/10.1051/metal/198986040317

PDF (22.66 MB)

This article has been cited by the following article(s):

Numerical simulation of aluminum-steel clad strip production using horizontal single belt casting process

Shiva Khakzad, Seyed Hossein Seyedein, Mohammad Reza Aboutalebi and Sheida Khakzad
Materials Today Communications 40 109644 (2024)
https://doi.org/10.1016/j.mtcomm.2024.109644

Casting of Thin Aluminum Alloy Wire Using a Single Wheel Caster

Toshio Haga, Mizuki Makita, Hisaki Watari and Shinichi Nishida
Materials Science Forum 1097 33 (2023)
https://doi.org/10.4028/p-11kMXe

Thin Wire Casting Using Twin Wheel Caster Equipped with Horizontal Wheels

Toshio Haga, Masanari Daishi, Hisaki Watari and Shinichi Nishida
Materials Science Forum 1066 19 (2022)
https://doi.org/10.4028/p-y78gtx

Casting of Wire Using Twin Wheel Caster with Melt Holding Nozzle

Toshio Haga, Naotsugu Okuda, Hisaki Watari and Shinichi Nishida
Key Engineering Materials 934 103 (2022)
https://doi.org/10.4028/p-r8pk4x

Casting of Aluminum Alloy Strand Using Two- and Three-Wheel Caster

Toshio Haga, Masanari Daishi, Takumi Mitsunari, Hisaki Watari and Shinichi Nishida
Key Engineering Materials 880 9 (2021)
https://doi.org/10.4028/www.scientific.net/KEM.880.9

Casting of Wire Using a Twin Wheel Caster

Toshio Haga, Ryusei Tahara, Hisaki Watari and Shinichi Nishida
Key Engineering Materials 904 137 (2021)
https://doi.org/10.4028/www.scientific.net/KEM.904.137

Casting of Thin Aluminum Alloy Rod Using Twin Wheel Caster Equipped with Rotating Side Dam Plates

Toshio Haga, Naotsugu Okuda, Hisaki Watari and Shinichi Nishida
Materials Science Forum 1042 61 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1042.61

Casting of Thin Bare Wire Using Wheel Caster Equipped with Rotating Side-Dam Plates

Toshio Haga, Kirito Itou, Hisaki Watari and Shinichi Nishida
Key Engineering Materials 846 152 (2020)
https://doi.org/10.4028/www.scientific.net/KEM.846.152

Fabrication of Aluminum Alloy Rods Using a Single Wheel Caster with Rotating Side Dam Plates and Pool-Less Pouring

Toshio Haga and Taisei Miyake
Key Engineering Materials 792 35 (2018)
https://doi.org/10.4028/www.scientific.net/KEM.792.35

Casting of Aluminum Alloy Rod by a Single Wheel with V-Groove

Toshio Haga and Taisei Miyake
Key Engineering Materials 792 53 (2018)
https://doi.org/10.4028/www.scientific.net/KEM.792.53

Clean Production

Giancarlo Barbiroli
Clean Production 121 (1996)
https://doi.org/10.1007/978-3-642-79940-2_3

Solidification Microstructure of Strip Cast Ti-Steel

E. Essadiqi and M. T. Shehata
Canadian Metallurgical Quarterly 33 (2) 111 (1994)
https://doi.org/10.1179/cmq.1994.33.2.111

Theoretical modelling of an isokinetical steel feeding system for near-net-shape strip casting

Reinhard Scholz, Rudolf Jeschar, Thomas Matschullat, Ulrich Urlau and Wolfgang Reichelt
Steel Research 64 (6) 300 (1993)
https://doi.org/10.1002/srin.199301026

Direct casting of thin strip steel

Jean-Pierre Birat
Endeavour 16 (3) 110 (1992)
https://doi.org/10.1016/0160-9327(92)90068-Z

Strip-Casting Simulation of Low Carbon Aluminum-Killed Steel

Alain Couture, Roch Angers, Madhava Rao Krishnadev, Elhachmi Es-Sadiqi and Jacques Masounave
Canadian Metallurgical Quarterly 31 (1) 63 (1992)
https://doi.org/10.1179/cmq.1992.31.1.63