Mesure de densité par absorption de rayonnements ionisants. Application à la caractérisation des aciers
Rev. Met. Paris, 87 12 (1990) 1145-1150
Published online: 2017-01-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Quantification of the phase fraction in steel using an electromagnetic sensor
L. Zhou, J. Liu, X.J. Hao, et al.NDT & E International 67 31 (2014)
https://doi.org/10.1016/j.ndteint.2014.06.007
Online electromagnetic monitoring of austenite transformation in hot strip rolling and its application to process optimization
A.V. Marmulev, G. Herman, J.-M. Turon, E.I. Poliak and L.M. KaputkinaRevue de Métallurgie 110 (3) 205 (2013)
https://doi.org/10.1051/metal/2013064
Modelling and experimental study of an electromagnetic sensor with an H-shaped ferrite core used for monitoring the hot transformation of steel in an industrial environment
Wenqian Zhu, Wuliang Yin, Anthony Peyton and Henk PloegaertNDT & E International 44 (7) 547 (2011)
https://doi.org/10.1016/j.ndteint.2011.05.005
986 (2010)
https://doi.org/10.1109/IMTC.2010.5488170
Measurement of permeability and ferrite/austenite phase fraction using a multi-frequency electromagnetic sensor
W. Yin, X.J. Hao, A.J. Peyton, M. Strangwood and C.L. DavisNDT & E International 42 (1) 64 (2009)
https://doi.org/10.1016/j.ndteint.2008.01.009
1 (2007)
https://doi.org/10.1109/IMTC.2007.379260
The Development of a Multifrequency Electromagnetic Instrument for Monitoring the Phase Transformation of Hot Strip Steel
Stephen J. Dickinson, R. Binns, Wuliang Yin, Claire Davis and Anthony J. PeytonIEEE Transactions on Instrumentation and Measurement 56 (3) 879 (2007)
https://doi.org/10.1109/TIM.2007.894183
Multi-frequency electromagnetic sensor measurement of ferrite/austenite phase fraction—Experiment and theory
R.J. Haldane, W. Yin, M. Strangwood, A.J. Peyton and C.L. DavisScripta Materialia 54 (10) 1761 (2006)
https://doi.org/10.1016/j.scriptamat.2006.01.041
2 1091 (2005)
https://doi.org/10.1109/IMTC.2005.1604311
Effect of microstructural variations on smart inductive sensor measurements of phase transformation in steel
M.Ph. Papaelias, M. Strangwood, A.J. Peyton and C.L. DavisScripta Materialia 51 (5) 379 (2004)
https://doi.org/10.1016/j.scriptamat.2004.05.019
Measurement and modeling of the electromagnetic response to phase transformation in steels
M. P. Papaelias, M. Strangwood, A. J. Peyton and C. L. DavisMetallurgical and Materials Transactions A 35 (13) 965 (2004)
https://doi.org/10.1007/s11661-004-1000-0
Measurement and modeling of the electromagnetic response to phase transformation in steels
M. P. Papaelias, M. Strangwood, C. L. Davis and A. J. PeytonMetallurgical and Materials Transactions A 35 (3) 965 (2004)
https://doi.org/10.1007/s11661-004-0023-x
Investigation of Centreline Segregation and Centreline Porosity in CC - Slabs
Hatto F. Jacobisteel research international 74 (11-12) 667 (2003)
https://doi.org/10.1002/srin.200300249
Using electromagnetic methods to monitor the transformation of steel samples
S. Johnstone, R. Binns, A. J. Peyton and W. D.N. PritchardTransactions of the Institute of Measurement and Control 23 (1) 21 (2001)
https://doi.org/10.1177/014233120102300102
Imaging the transformation of hot strip steel using magnetic techniques
C. BellJournal of Electronic Imaging 10 (3) 669 (2001)
https://doi.org/10.1117/1.1380386