Tundish metallurgy : a combined Irsid and Hoogovens research
Rev. Met. Paris, 89 3 (1992) 269-278
Published online: 2017-01-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Microstructure and properties of ceramic filter containing porous MgO coating and its filtration of Al2O3 inclusions in molten steel
Wangding Peng, Zhe Chen, Wen Yan, Junfeng Chen, Guangqiang Li and Yawei LiCeramics International 50 (1) 218 (2024)
https://doi.org/10.1016/j.ceramint.2023.10.096
337 769 (2024)
https://doi.org/10.1007/978-3-031-40930-1_30
337 741 (2024)
https://doi.org/10.1007/978-3-031-40930-1_29
Periclase-magnesium aluminate spinel ceramics filter with excellent purification efficiency on molten steel prepared from Mg(OH)2: Effect of fused MgO content
Wangding Peng, Zhe Chen, Wen Yan, Junfeng Chen, Guangqiang Li and Nan LiJournal of the European Ceramic Society 44 (15) 116772 (2024)
https://doi.org/10.1016/j.jeurceramsoc.2024.116772
Numerical Simulation of an Industrial‐Scale Prototypical Steel Melt Tundish Considering Flow Control and Cleaning Strategies
Sebastian Neumann, Amjad Asad and Rüdiger SchwarzeAdvanced Engineering Materials 22 (2) (2020)
https://doi.org/10.1002/adem.201900658
Carbon‐Bonded Alumina Spaghetti Filters by Alginate‐Based Robo Gel Casting
Tony Wetzig, Anne Schmidt, Steffen Dudczig, Gert Schmidt, Nora Brachhold and Christos G. AnezirisAdvanced Engineering Materials 22 (2) (2020)
https://doi.org/10.1002/adem.201900657
Application of exchangeable carbon-bonded alumina foam filters in an industrial tundish for the continuous casting of steel
Tony Wetzig, Andreas Baaske, Sven Karrasch, et al.Ceramics International 44 (18) 23024 (2018)
https://doi.org/10.1016/j.ceramint.2018.09.105
Mathematical Modeling of Hydrodynamic Processes in a Tundish Ladle of the CCM in the Course of Bottom Blowing with Inert Gases
A. S. Él’darkhanov, A. S. Nuradinov, M. R. Nakhaev and L. Kh.-A. SaipovaMetallurgist 62 (5-6) 401 (2018)
https://doi.org/10.1007/s11015-018-0674-2
Development and testing of carbon-bonded alumina foam filters for continuous casting of steel
Tony Wetzig, Bruno Luchini, Steffen Dudczig, Jana Hubálková and Christos G. AnezirisCeramics International 44 (15) 18143 (2018)
https://doi.org/10.1016/j.ceramint.2018.07.022
Industrial Experiments Filtration of Steel
Krystian Janiszewski, Bożena Gajdzik, Karel Gryc, Ladislav Socha and Agnieszka BogdałSolid State Phenomena 226 189 (2015)
https://doi.org/10.4028/www.scientific.net/SSP.226.189
The Slenderness Ratio of the Filter Used in the Process of Liquid Steel Filtration as the Additional Parameter of the Filter Form
Krystian Janiszewskisteel research international 84 (3) 288 (2013)
https://doi.org/10.1002/srin.201200077
The Influence of Non-Metallic Inclusions Physical State on Effectiveness of the Steel Filtration Process
Krystian Janiszewski and Zdzislaw Kudlińskisteel research international 77 (3) 169 (2006)
https://doi.org/10.1002/srin.200606371
Non-metallic inclusion entrapment by slags: laboratory investigation
P. Rocabois, J. Lehmann, C. Gatellier and J. P. TeresIronmaking & Steelmaking 30 (2) 95 (2003)
https://doi.org/10.1179/030192303225001775