New evaluation of critical strain for internal crack formation in continuous casting
Rev. Met. Paris, 89 7-8 (1992) 627-634
Published online: 2017-01-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Sensitivity of Midway and Surface Crack During Solidification End Reduction on Large Sized Continuously Cast Round Bloom
Peng Lan, Liang Li and Jiaquan ZhangMetallurgical and Materials Transactions B 56 (1) 515 (2025)
https://doi.org/10.1007/s11663-024-03363-0
Optimizing mold electromagnetic stirring parameters for coordinated control of initial shell solidification quality in large round blooms under four-port submerged entry nozzle for feeding
Tao Wang, Chang-jun Xu, Chong Lei, Lu-hao Ren, Wen Wang and Hong-lin GuoJournal of Iron and Steel Research International (2025)
https://doi.org/10.1007/s42243-025-01445-0
Effect of Final Electromagnetic Stirring on Internal Thermal Stress, Strain and Cracking of Continuous Casting Bloom
Hongjian Wu, Chong Lei, Changjun Xu, Tao Wang, Ningning Liu and Gengxin MaISIJ International 63 (8) 1373 (2023)
https://doi.org/10.2355/isijinternational.ISIJINT-2023-040
Formation and control of the surface defect in hypo-peritectic steel during continuous casting: A review
Quanhui Li, Peng Lan, Haijie Wang, Hongzhou Ai, Deli Chen and Haida WangInternational Journal of Minerals, Metallurgy and Materials 30 (12) 2281 (2023)
https://doi.org/10.1007/s12613-023-2716-4
Inter-Columnar Macro-Segregation in Continuously Cast Steel; Characterization, Possible Reasons, and Consequences
Seenivasan Rajiah, Manjini Sambandam, Sethu Prasanth Shanmugam, Saju Vikraman and Rajendra TaticherlaTransactions of the Indian Institute of Metals 74 (7) 1557 (2021)
https://doi.org/10.1007/s12666-021-02264-z
Effect of Solidifying Structure on Centerline Segregation of S50C Steel Produced by Compact Strip Production
Kai Liu, Shusen Cheng, Jipeng Li and Yongping FengCoatings 11 (12) 1497 (2021)
https://doi.org/10.3390/coatings11121497
Causes of Internal Cracks in Continuous Casting Billet and Solutions
明阳 封Metallurgical Engineering 06 (01) 1 (2019)
https://doi.org/10.12677/MEng.2019.61001
Investigation on hot cracking during laser welding by means of experimental and numerical methods
H. Gao, G. Agarwal, M. Amirthalingam, M. J. M. Hermans and I. M. RichardsonWelding in the World 62 (1) 71 (2018)
https://doi.org/10.1007/s40194-017-0524-z
Application of a Pore Fraction Hot Tearing Model to Directionally Solidified and Direct Chill Cast Aluminum Alloys
Ruifeng Dou and A. B. PhillionMetallurgical and Materials Transactions A 47 (8) 4217 (2016)
https://doi.org/10.1007/s11661-016-3590-8
Modeling of Hot Ductility During Solidification of Steel Grades in Continuous Casting – Part I
Dieter Senk, Sonja Stratemeier, Bernd Böttger, Klaus Göhler and Ingo SteinbachAdvanced Engineering Materials 12 (3) 94 (2010)
https://doi.org/10.1002/adem.201000021
Modelling of Manganese Sulphide Formation during Solidification, Part II: Correlation of Solidification and MnS Formation
Roman Diederichs, Raimund Bülte, Gerhard Pariser and Wolfgang Blecksteel research international 77 (4) 256 (2006)
https://doi.org/10.1002/srin.200606383
Analysis of Solute Distribution during the Solidification of Low Alloyed Steels
Carlos Cicutti and Roberto Boeristeel research international 77 (3) 194 (2006)
https://doi.org/10.1002/srin.200606374
Effect of Residual Elements on Hot‐Crack Susceptibility of Austenitic Stainless Steel
Piotr R. Scheller, Wolfgang Bleck and Roman Fleschsteel research international 75 (10) 672 (2004)
https://doi.org/10.1002/srin.200405827
Study on the Design of the Soft Reduction Unit of High‐Speed Billet Casters
Ralf Thome and Klaus Harstesteel research international 75 (10) 693 (2004)
https://doi.org/10.1002/srin.200405830
Thin slab casting with liquid core reduction
A. Yamanaka, S. Kumakura, K. Okamura, et al.Ironmaking & Steelmaking 26 (6) 457 (1999)
https://doi.org/10.1179/030192399677301
Crack susceptibility of medium and high alloyed tool steels under continuous casting conditions
Roman Flesch and Wolfgang BleckSteel Research 69 (7) 292 (1998)
https://doi.org/10.1002/srin.199805552
Mechanism of Internal Cracking in Continuous Casting
Akihiro YAMANAKA, Kazuo OKAMURA and Takashi KANAZAWATetsu-to-Hagane 82 (12) 999 (1996)
https://doi.org/10.2355/tetsutohagane1955.82.12_999
On the crack susceptibility of high alloyed tool steels during continuous casting and in the temperature region of hot working
Ralf Thome and Winfried DahlSteel Research 66 (2) 63 (1995)
https://doi.org/10.1002/srin.199501089