The optimization of mold taper for the llva-Dalmine round bloom caster
Rev. Met. Paris, 91 4 (1994) 609-620
Published online: 2017-01-20
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification
Matthew L. S. Zappulla, Lance C. Hibbeler and Brian G. ThomasMetallurgical and Materials Transactions A 48 (8) 3777 (2017)
https://doi.org/10.1007/s11661-017-4112-z
A reduced-order model of mould heat transfer in the continuous casting of steel
Lance C. Hibbeler, Melody M. Chin See, Junya Iwasaki, et al.Applied Mathematical Modelling 40 (19-20) 8530 (2016)
https://doi.org/10.1016/j.apm.2016.04.002
The Influence of the Near-Meniscus Zone in Continuous Casting Mold on the Surface Quality of the Continuous Casting Ingots
A. Sorek and Z. KudlińskiArchives of Metallurgy and Materials 57 (1) 371 (2012)
https://doi.org/10.2478/v10172-012-0036-1
Effect of Alloying Elements on Thermal Contraction and Crack Susceptibility during In-Mold Solidification
M.R. Ridolfi, A. De Vito and L. FerroMetallurgical and Materials Transactions B 39 (4) 581 (2008)
https://doi.org/10.1007/s11663-008-9159-1
Simulation of Microstructure and Behavior of Interfacial Mold Slag Layers in Continuous Casting of Steel
Ya Meng and Brian G. ThomasISIJ International 46 (5) 660 (2006)
https://doi.org/10.2355/isijinternational.46.660
Modeling of the solidification process in a continuous casting installation for steel slabs
Marcial Gonzalez, Marcela B. Goldschmit, Andrea P. Assanelli, Eduardo N. Dvorkin and Elena Fernández BerdaguerMetallurgical and Materials Transactions B 34 (4) 455 (2003)
https://doi.org/10.1007/s11663-003-0072-3
Constitutive models of steel under continuous casting conditions
Vı́ctor D. Fachinotti and Alberto CardonaJournal of Materials Processing Technology 135 (1) 30 (2003)
https://doi.org/10.1016/S0924-0136(02)00955-X
Analysis of flux flow and the formation of oscillation marks in the continuous caster
James M. Hill, Yong Hong Wu and Benchawan WiwatanapatapheeJournal of Engineering Mathematics 36 (4) 311 (1999)
https://doi.org/10.1023/A:1004516429675