Development of casting practices to minimise transverse cracking in microalloyed steels
Rev. Met. Paris, 91 7-8 (1994) 1081-1090
Published online: 2017-01-23
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Microscopic Investigation for Experimental Study on Transverse Cracking of Ti-Nb Containing Micro-Alloyed Steels
Serkan Turan, Hossam Shafy and Heinz PalkowskiMaterials 17 (4) 900 (2024)
https://doi.org/10.3390/ma17040900
Mitigation of Corner Cracking in Continuously Cast Steel Slabs Through Strain Induced Crack Opening Test
Pranav Kumar Tripathi, D. Satish Kumar, T. Rajendra and S. C. VishwanathJournal of Failure Analysis and Prevention 23 (5) 1918 (2023)
https://doi.org/10.1007/s11668-023-01758-w
Effects of Sulfur on the Surface Crack in Medium Carbon Bloom
Lidong Xing, Zefeng Zhang, Lihua Zhao and Yanping Baosteel research international 93 (9) (2022)
https://doi.org/10.1002/srin.202200119
Longitudinal corner crack of chamfered slab and optimization of mould
Hong-biao Tao, Hui Zhang, He-ping Liu and Ming-lin WangJournal of Iron and Steel Research International (2022)
https://doi.org/10.1007/s42243-022-00834-z
Effect of mold corner structures on the fluid flow, heat transfer and inclusion motion in slab continuous casting molds
Sheng Yu, Mujun Long, Mengyuan Zhang, et al.Journal of Manufacturing Processes 68 1784 (2021)
https://doi.org/10.1016/j.jmapro.2021.06.067
A review of chamfer technology in continuous casting process
Nanfu Zong, Yang Liu, Sida Ma, et al.Metallurgical Research & Technology 117 (2) 204 (2020)
https://doi.org/10.1051/metal/2020014
Research Status and Control Measures of Transverse Cracks for Micro-alloyed Continuous Casting Billet
Qi Li, Jian Wu, Li Bao and Yu GuIOP Conference Series: Materials Science and Engineering 538 (1) 012002 (2019)
https://doi.org/10.1088/1757-899X/538/1/012002
Neural Network Modelling to Characterize Steel Continuous Casting Process Parameters and Prediction of Casting Defects
Sheuli Hore, Suchandan K. Das, Manoj M. Humane and Anil Kumar PeethalaTransactions of the Indian Institute of Metals 72 (12) 3015 (2019)
https://doi.org/10.1007/s12666-019-01767-0
Analysis of titanium nitrides precipitated during medium carbon steels solidification
Constantino Capurro and Carlos CicuttiJournal of Materials Research and Technology 7 (3) 342 (2018)
https://doi.org/10.1016/j.jmrt.2018.04.010
Materials Processing Fundamentals 2017
Sheng Yu, Dengfu Chen, Pei Xu, et al.The Minerals, Metals & Materials Series, Materials Processing Fundamentals 2017 131 (2017)
https://doi.org/10.1007/978-3-319-51580-9_13
Elimination of Surface Defects in High Tensile Steel for Wheel Rim Application
T. K. RoyJournal of Failure Analysis and Prevention 17 (1) 93 (2017)
https://doi.org/10.1007/s11668-016-0213-z
Formation of Initial Defects at Meniscus in Oscillating Mold
Xiao Jing Zuo, Ren Gan Lin, Ning Wang, Jie Yang, Xiang Ning Meng and Miao Yong Zhusteel research international 87 (4) 413 (2016)
https://doi.org/10.1002/srin.201500265
A Model Estimating the Slab Corner Transverse Cracking Susceptibility of Microalloyed Steel Based on Microstructure
Jiang Liu, Guanghua Wen, Yunfeng Li and Ping TangMATERIALS TRANSACTIONS 57 (1) 20 (2016)
https://doi.org/10.2320/matertrans.M2015243
Effects of Nickel Coating of Mold Plates on Star Crack Defects
Sabri Ozturk, Mustafa Merih Arikan and Yilmaz KacarMetallurgical and Materials Transactions B 44 (3) 706 (2013)
https://doi.org/10.1007/s11663-013-9821-0
Influence of undercooling thermal cycle on hot ductility of C–Mn–Al–Ti and C–Mn–Al–Nb–Ti steels
C. Spradbery and B. MintzIronmaking & Steelmaking 32 (4) 319 (2005)
https://doi.org/10.1179/174328105X48016