The transformation of slip dislocations during twinning of copper-aluminum alloy crystals
Rev. Met. Paris, 94 9 (1997) 1037-1044
Published online: 2017-01-17
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Magnesium Technology 2017
Christopher Barrett, Fulin Wang, Sean Agnew and Haitham El KadiriThe Minerals, Metals & Materials Series, Magnesium Technology 2017 147 (2017)
https://doi.org/10.1007/978-3-319-52392-7_23
Misorientation-Dependent Twinning Induced Hardening and Texture Evolution of TWIP Steel Sheet in Plastic Deformation Process
Ning Guo, Chaoyang Sun, Mingwang Fu and Mingchuan HanMetals 7 (9) 348 (2017)
https://doi.org/10.3390/met7090348
Slip versus twinning in low and very low stacking-fault energy Cu-Al alloy single crystals
M.J. Szczerba and M.S. SzczerbaActa Materialia 133 109 (2017)
https://doi.org/10.1016/j.actamat.2017.05.011
Microstructure evolution and strengthening mechanisms in commercial-purity titanium subjected to equal-channel angular pressing
G.S. Dyakonov, S. Mironov, I.P. Semenova, R.Z. Valiev and S.L. SemiatinMaterials Science and Engineering: A 701 289 (2017)
https://doi.org/10.1016/j.msea.2017.06.079
Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining
Qingqing Wang and Zhanqiang LiuMaterials Science and Engineering: A 675 271 (2016)
https://doi.org/10.1016/j.msea.2016.08.076
Micromechanical modelling of twinning in polycrystalline materials: Application to magnesium
Charles Mareau and Mark R. DaymondInternational Journal of Plasticity 85 156 (2016)
https://doi.org/10.1016/j.ijplas.2016.07.007
Investigations of orientation and length scale effects on micromechanical responses in polycrystalline zirconium using spherical nanoindentation
Siddhartha Pathak, Surya R. Kalidindi and Nathan A. MaraScripta Materialia 113 241 (2016)
https://doi.org/10.1016/j.scriptamat.2015.10.035
Effect of initial orientation on the tensile properties of commercially pure titanium
Subhasis Sinha, Atasi Ghosh and N. P. GuraoPhilosophical Magazine 96 (15) 1485 (2016)
https://doi.org/10.1080/14786435.2016.1165873
High temperature deformation behavior and microstructural evolutions of a high Zr containing WE magnesium alloy
Sh. Asqardoust, A. Zarei-Hanzaki, S.M. Fatemi and M. Moradjoy-HamedaniJournal of Alloys and Compounds 669 108 (2016)
https://doi.org/10.1016/j.jallcom.2016.01.232
Detwinning of face-centered cubic deformation twins via the correspondence matrix approach
M.J. Szczerba, S. Kopacz and M.S. SzczerbaActa Materialia 102 162 (2016)
https://doi.org/10.1016/j.actamat.2015.09.020
Experimental studies on detwinning of face-centered cubic deformation twins
M.J. Szczerba, S. Kopacz and M.S. SzczerbaActa Materialia 104 52 (2016)
https://doi.org/10.1016/j.actamat.2015.11.025
Micromechanical modeling of hardening mechanisms in commercially pure α-titanium in tensile condition
K.E.K. Amouzou, T. Richeton, A. Roth, M.A. Lebyodkin and T.A. LebedkinaInternational Journal of Plasticity 80 222 (2016)
https://doi.org/10.1016/j.ijplas.2015.09.008
139 (2015)
https://doi.org/10.1002/9781119093428.ch27
Why are {101¯2} twins profuse in magnesium?
Haitham El Kadiri, Christopher D. Barrett, Jian Wang and Carlos N. ToméActa Materialia 85 354 (2015)
https://doi.org/10.1016/j.actamat.2014.11.033
Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr
Marko Knezevic, Milovan Zecevic, Irene J. Beyerlein, John F. Bingert and Rodney J. McCabeActa Materialia 88 55 (2015)
https://doi.org/10.1016/j.actamat.2015.01.037
Microstructure evolution of commercial-purity titanium during cryorolling
G. S. D’yakonov, S. V. Zherebtsov, M. V. Klimova and G. A. SalishchevThe Physics of Metals and Metallography 116 (2) 182 (2015)
https://doi.org/10.1134/S0031918X14090038
Improved mechanical properties of a twinning-induced plasticity steel prepared by directional solidification
Dan Wang, Kun Wang, Zhendong Li, et al.Materials Science and Engineering: A 636 396 (2015)
https://doi.org/10.1016/j.msea.2015.03.118
Crossing grain boundaries in metals by slip bands, cleavage and fatigue cracks
André PineauPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 373 (2038) 20140131 (2015)
https://doi.org/10.1098/rsta.2014.0131
The role of twinning deformation on the hardening response of polycrystalline magnesium from discrete dislocation dynamics simulations
Haidong Fan, Sylvie Aubry, Athanasios Arsenlis and Jaafar A. El-AwadyActa Materialia 92 126 (2015)
https://doi.org/10.1016/j.actamat.2015.03.039
Transmission Electron Microscope In Situ Straining Technique to Directly Observe Defects and Interfaces During Deformation in Magnesium
B. M. Morrow, E. K. Cerreta, R. J. McCabe and C. N. ToméJOM 67 (8) 1721 (2015)
https://doi.org/10.1007/s11837-015-1432-6
Mechanisms for enhanced plasticity in magnesium alloys
S.Q. Zhu, H.G. Yan, X.Z. Liao, et al.Acta Materialia 82 344 (2015)
https://doi.org/10.1016/j.actamat.2014.09.006
Effect of strain rate on twinning in a Zr alloy
Rajeev Kapoor, Apu Sarkar, Jaiveer Singh, Indradev Samajdar and Dierk RaabeScripta Materialia 74 72 (2014)
https://doi.org/10.1016/j.scriptamat.2013.10.025
Mechanisms of anisotropy of mechanical properties of α-titanium in tension conditions
A. Roth, M.A. Lebyodkin, T.A. Lebedkina, et al.Materials Science and Engineering: A 596 236 (2014)
https://doi.org/10.1016/j.msea.2013.12.061
Study of texture, anisotropy and formability of cartridge brass sheets
K. Hajizadeh, M. Tajally, E. Emadoddin and E. BorhaniJournal of Alloys and Compounds 588 690 (2014)
https://doi.org/10.1016/j.jallcom.2013.11.091
Formability behavior of brass alloy sheet: the role of twins in microstructure
Mohammad Tajally, Esmaeil Emadoddin and Ehsan Allah ShahiRussian Journal of Non-Ferrous Metals 55 (5) 429 (2014)
https://doi.org/10.3103/S1067821214050162
Time and spatial resolution of slip and twinning in a grain embedded within a magnesium polycrystal
P.A. Lynch, M. Kunz, N. Tamura and M.R. BarnettActa Materialia 78 203 (2014)
https://doi.org/10.1016/j.actamat.2014.06.030
In-plane anisotropic deformation behavior of rolled Mg–3Al–1Zn alloy by initial {10–12} twins
Sung Hyuk Park, Seong-Gu Hong and Chong Soo LeeMaterials Science and Engineering: A 570 149 (2013)
https://doi.org/10.1016/j.msea.2013.01.071
Strong strain hardening ability in an as-cast Mg–3Sn–1Zn alloy
Dan Luo, Hui-Yuan Wang, Lei Chen, Guo-Jun Liu, Jin-Guo Wang and Qi-Chuan JiangMaterials Letters 94 51 (2013)
https://doi.org/10.1016/j.matlet.2012.12.001
Study of $$ \{ 11\bar{2} 1\} $$ Twinning in α-Ti by EBSD and Laue Microdiffraction
Leyun Wang, Rozaliya Barabash, Thomas Bieler, Wenjun Liu and Philip EisenlohrMetallurgical and Materials Transactions A 44 (8) 3664 (2013)
https://doi.org/10.1007/s11661-013-1714-y
Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity
Marko Knezevic, Rodney J. McCabe, Carlos N. Tomé, et al.International Journal of Plasticity 43 70 (2013)
https://doi.org/10.1016/j.ijplas.2012.10.011
Mechanism of twinning-induced plasticity in β-type Ti–15Mo alloy
Xiaohua Min, Xuejiao Chen, Satoshi Emura and Koichi TsuchiyaScripta Materialia 69 (5) 393 (2013)
https://doi.org/10.1016/j.scriptamat.2013.05.027
Role of tension twins on warm deformation behavior of AZ31 Mg alloy
J. H. Park, H. L. Kim, J. E. Jung and Y. W. ChangMetals and Materials International 19 (3) 389 (2013)
https://doi.org/10.1007/s12540-013-3003-0
A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
Marko Knezevic, Irene J. Beyerlein, Donald W. Brown, Thomas A. Sisneros and Carlos N. ToméInternational Journal of Plasticity 49 185 (2013)
https://doi.org/10.1016/j.ijplas.2013.03.008
Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
Bin Li, Shailendra P. Joshi, O. Almagri, et al.Acta Materialia 60 (4) 1818 (2012)
https://doi.org/10.1016/j.actamat.2011.12.002
Improved formability of Mg–3Al–1Zn alloy by pre-stretching and annealing
Hua Zhang, Guangsheng Huang, Lifei Wang and Jinhan LiScripta Materialia 67 (5) 495 (2012)
https://doi.org/10.1016/j.scriptamat.2012.06.017
Magnesium Technology 2012
Fumiaki Hiura, Raja K. Mishra, Michael Lukitsch and Marek NiewczasMagnesium Technology 2012 117 (2012)
https://doi.org/10.1007/978-3-319-48203-3_22
Twinning effects in a rod-textured AM30 Magnesium alloy
Q. Ma, H. El Kadiri, A.L. Oppedal, et al.International Journal of Plasticity 29 60 (2012)
https://doi.org/10.1016/j.ijplas.2011.08.001
On the reverse mode of fcc deformation twinning
M.S. Szczerba, S. Kopacz and M.J. SzczerbaActa Materialia 60 (18) 6413 (2012)
https://doi.org/10.1016/j.actamat.2012.08.028
117 (2012)
https://doi.org/10.1002/9781118359228.ch22
Transformation of dislocations during twin variant reorientation in Ni–Mn–Ga martensite structures
Maciej J. Szczerba and Marek S. SzczerbaScripta Materialia 66 (1) 29 (2012)
https://doi.org/10.1016/j.scriptamat.2011.09.034
Enhancing tensile and compressive strength of magnesium using ball milled Al+CNT reinforcement
M.K. Habibi, A.M.S. Hamouda and M. GuptaComposites Science and Technology 72 (2) 290 (2012)
https://doi.org/10.1016/j.compscitech.2011.11.015
Crystal plasticity based finite element modelling of large strain deformation in AM30 magnesium alloy
Adel Izadbakhsh, Kaan Inal and Raja K MishraModelling and Simulation in Materials Science and Engineering 20 (3) 035016 (2012)
https://doi.org/10.1088/0965-0393/20/3/035016
The deformation behaviour of the magnesium alloy AZ80 at 77 and 293K
J. Jain, W.J. Poole and C.W. SinclairMaterials Science and Engineering: A 547 128 (2012)
https://doi.org/10.1016/j.msea.2012.04.003
Microstructure Evolution during Roller Hemming of AZ31B Magnesium Sheet
Amanda Levinson, Raja K. Mishra, Roger D. Doherty and Surya R. KalidindiMetallurgical and Materials Transactions A 43 (10) 3824 (2012)
https://doi.org/10.1007/s11661-012-1184-7
Crystal Plasticity Based Numerical Modelling of Large Strain Deformation inHexagonal Closed Packed Metals
Kaan Inal and Raja K. MishraProcedia IUTAM 3 239 (2012)
https://doi.org/10.1016/j.piutam.2012.03.016
Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium
S.V. Zherebtsov, G.S. Dyakonov, A.A. Salem, et al.Materials Science and Engineering: A 528 (9) 3474 (2011)
https://doi.org/10.1016/j.msea.2011.01.039
Work-hardening behaviour of Mg single crystals oriented for basal slip
B. Bhattacharya and M. NiewczasPhilosophical Magazine 91 (17) 2227 (2011)
https://doi.org/10.1080/14786435.2011.555783
Hot working and crystallographic texture analysis of magnesium AZ alloys
R. Bhattacharya and B. P. WynneMaterials Science and Technology 27 (2) 461 (2011)
https://doi.org/10.1179/026708309X12578491814799
New crystal plasticity constitutive model for large strain deformation in single crystals of magnesium
Adel Izadbakhsh, Kaan Inal, Raja K. Mishra and Marek NiewczasComputational Materials Science 50 (7) 2185 (2011)
https://doi.org/10.1016/j.commatsci.2011.02.030
Lattice correspondence during twinning in hexagonal close-packed crystals
M. NiewczasActa Materialia 58 (17) 5848 (2010)
https://doi.org/10.1016/j.actamat.2010.06.059
Tensile deformation behavior of high manganese austenitic steel: The role of grain size
G. Dini, A. Najafizadeh, R. Ueji and S.M. Monir-VaghefiMaterials & Design 31 (7) 3395 (2010)
https://doi.org/10.1016/j.matdes.2010.01.049
A crystal plasticity theory for latent hardening by glide twinning through dislocation transmutation and twin accommodation effects
H. El Kadiri and A.L. OppedalJournal of the Mechanics and Physics of Solids 58 (4) 613 (2010)
https://doi.org/10.1016/j.jmps.2009.12.004
Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy Processed by Accumulative Back Extrusion (ABE)
Mahmood Fatemi Varzaneh, Jose María Cabrera and Abbas Zarei HanzakiMaterials Science Forum 667-669 1033 (2010)
https://doi.org/10.4028/www.scientific.net/MSF.667-669.1033
Mechanisms of Microstructure Refinement in Titanium during “abc” Deformation at 400°C
Sergey V. Zherebtsov, Egor A. Kudryavtsev and Gennady A. SalishchevMaterials Science Forum 667-669 439 (2010)
https://doi.org/10.4028/www.scientific.net/MSF.667-669.439
Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31
Gwénaëlle Proust, Carlos N. Tomé, Ashutosh Jain and Sean R. AgnewInternational Journal of Plasticity 25 (5) 861 (2009)
https://doi.org/10.1016/j.ijplas.2008.05.005
Strain path and work-hardening behavior of brass
N.A. Sakharova, J.V. Fernandes and M.F. VieiraMaterials Science and Engineering: A 507 (1-2) 13 (2009)
https://doi.org/10.1016/j.msea.2009.01.006
Origin of dislocations within tensile and compressive twins in pure textured Zr
D. Bhattacharyya, E.K. Cerreta, R. McCabe, et al.Acta Materialia 57 (2) 305 (2009)
https://doi.org/10.1016/j.actamat.2008.09.014
Molecular dynamic studies of the interaction of a/6⟨112⟩ Shockley dislocations with stacking fault tetrahedra in copper. Part II: Intersection of stacking fault tetrahedra by moving twin boundaries
M. Niewczas and R.G. HoaglandPhilosophical Magazine 89 (8) 727 (2009)
https://doi.org/10.1080/14786430902740703
Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation
S.W. Xu, S. Kamado, N. Matsumoto, T. Honma and Y. KojimaMaterials Science and Engineering: A 527 (1-2) 52 (2009)
https://doi.org/10.1016/j.msea.2009.08.062
Molecular dynamics studies of the interaction of a /6 ⟨112⟩ Shockley dislocations with stacking fault tetrahedra in copper. Part I: Intersection of SFT by an isolated Shockley
M. Niewczas and R.G. HoaglandPhilosophical Magazine 89 (7) 623 (2009)
https://doi.org/10.1080/14786430902740737
Slip-assisted twin growth in hexagonal close-packed metals
L. Capolungo, I.J. Beyerlein and C.N. ToméScripta Materialia 60 (1) 32 (2009)
https://doi.org/10.1016/j.scriptamat.2008.08.044
Strain hardening due to {10 12} twinning in pure magnesium
C.H. Cáceres, P. Lukáč and A. BlakePhilosophical Magazine 88 (7) 991 (2008)
https://doi.org/10.1080/14786430701881211
Effect of hot forging on the microstructure and mechanical properties of Mg–Zn–Y alloy
G. Garcés, A. Müller, E. Oñorbe, P. Pérez and P. AdevaJournal of Materials Processing Technology 206 (1-3) 99 (2008)
https://doi.org/10.1016/j.jmatprotec.2007.12.014
Twinning and the ductility of magnesium alloys
M.R. BarnettMaterials Science and Engineering: A 464 (1-2) 1 (2007)
https://doi.org/10.1016/j.msea.2006.12.037
Twinning and texture development in two Mg alloys subjected to loading along three different strain paths
L. Jiang, J.J. Jonas, R.K. Mishra, et al.Acta Materialia 55 (11) 3899 (2007)
https://doi.org/10.1016/j.actamat.2007.03.006
Exploring the dislocation/twin interactions in zirconium
G.C. Kaschner, C.N. Tomé, R.J. McCabe, et al.Materials Science and Engineering: A 463 (1-2) 122 (2007)
https://doi.org/10.1016/j.msea.2006.09.115
Dislocations in Solids
Marek NiewczasDislocations in Solids 13 263 (2007)
https://doi.org/10.1016/S1572-4859(07)80007-6
Strain hardening due to deformation twinning in α-titanium: Mechanisms
A. A. Salem, S. R. Kalidindi, R. D. Doherty and S. L. SemiatinMetallurgical and Materials Transactions A 37 (1) 259 (2006)
https://doi.org/10.1007/s11661-006-0171-2
A semianalytical sachs model for the flow stress of a magnesium alloy
M. R. Barnett, Z. Keshavarz and X. MaMetallurgical and Materials Transactions A 37 (7) 2283 (2006)
https://doi.org/10.1007/BF02586147
Effect of volume fraction and particle size on the microstructure and plastic deformation of Mg–Y2O3 composites
G. Garcés, M. Rodríguez, P. Pérez and P. AdevaMaterials Science and Engineering: A 419 (1-2) 357 (2006)
https://doi.org/10.1016/j.msea.2006.01.026
Anomalous hardening in copper due to the growth of deformation-induced micro-twins after annealing
N. Jia, Y.D. Wang, S.D. Wu, W.Z. Han, Y.N. Wang, J.N. Deng and P.K. LiawScripta Materialia 54 (7) 1247 (2006)
https://doi.org/10.1016/j.scriptamat.2005.12.035
Texture, Twinning and Uniform Elongation of Wrought Magnesium
Matthew R. BarnettMaterials Science Forum 495-497 1079 (2005)
https://doi.org/10.4028/www.scientific.net/MSF.495-497.1079
An analytical constitutive law for twinning dominated flow in magnesium
M.R. Barnett, C.H.J. Davies and X. MaScripta Materialia 52 (7) 627 (2005)
https://doi.org/10.1016/j.scriptamat.2004.11.022
Microstructural investigation of friction stir welded pure titanium
Won-Bae Lee, Chang-Young Lee, Woong-Seong Chang, Yun-Mo Yeon and Seung-Boo JungMaterials Letters 59 (26) 3315 (2005)
https://doi.org/10.1016/j.matlet.2005.05.064
Twin-transformed lattice defects in γ-TiAl
Yu-Lung Chiu, Fabienne Grégori, Haruyuki Inui and Patrick Veyssière *Philosophical Magazine 84 (30) 3235 (2004)
https://doi.org/10.1080/14786430412331284298
The recrystallization of copper single crystals deformed at 4.2 K
M Niewczas, O Engler and J.D EmburyActa Materialia 52 (3) 539 (2004)
https://doi.org/10.1016/j.actamat.2003.09.048
Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
M.R. Barnett, Z. Keshavarz, A.G. Beer and D. AtwellActa Materialia 52 (17) 5093 (2004)
https://doi.org/10.1016/j.actamat.2004.07.015
Role of Deformation Twinning on Strain Hardening in Cubic and Hexagonal Polycrystalline Metals
S.R. Kalidindi, A.A. Salem and R.D. DohertyAdvanced Engineering Materials 5 (4) 229 (2003)
https://doi.org/10.1002/adem.200300320
Twinning nucleation in Cu-8 at. % Al single crystals
M. Niewczas and G. SaadaPhilosophical Magazine A 82 (1) 167 (2002)
https://doi.org/10.1080/01418610208240003
Bainite: defect signatures
Gary R. PurdyScripta Materialia 47 (3) 181 (2002)
https://doi.org/10.1016/S1359-6462(02)00126-4
Deformation of copper single crystals to large strains at 4.2 K
M. Niewczas, Z. S. Basinski and J. D. EmburyPhilosophical Magazine A 81 (5) 1143 (2001)
https://doi.org/10.1080/01418610108214433
Deformation of copper single crystals to large strains at 4.2K
M. Niewczas, Z. S. Basinski, S. J. Basinski and J. D. EmburyPhilosophical Magazine A 81 (5) 1121 (2001)
https://doi.org/10.1080/01418610108214432
Development of high strength pure copper wires by cryogenic deformation for magnet applications
L. Brandao, K. Han, J.D. Embury, et al.IEEE Transactions on Appiled Superconductivity 10 (1) 1284 (2000)
https://doi.org/10.1109/77.828470