EDP Sciences logo
Subscriber Authentication Point
Sciengine logo
Search
Menu
All issues Rev. Met. Paris, 94 9 (1997) 1037-1044 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Anisotropy in stress-strain relationship in commercially pure titanium enhanced by deformation incompatibility

Yoshiki Kawano, Masatoshi Mitsuhara and Tsuyoshi Mayama
Materials Science and Engineering: A 952 149690 (2026)
https://doi.org/10.1016/j.msea.2025.149690

Interaction between {101¯2} and {112¯2} twins and interface mobility in hexagonal close-packed titanium

Weijiang Guo, Peng Chen, Wei Zhang, Cheng Wang and Hui-yuan Wang
International Journal of Plasticity 199 104651 (2026)
https://doi.org/10.1016/j.ijplas.2026.104651

Low-Temperature Deformation Mechanisms and Fracture Behavior of Fe–Mn–Al–C Lightweight Steels with Varying Al Content

Shiyuan Duan, Shifeng Liu, Yan Wang, Changjun Wang and Chunxu Wang
Metallurgical and Materials Transactions A 57 (1) 46 (2026)
https://doi.org/10.1007/s11661-025-08007-9

Tensile strength-ductility properties of face-centered cubic deformation twin/matrix structures

M. S. Szczerba, M. Kowalska, S. Kopacz and M. J. Szczerba
Archives of Civil and Mechanical Engineering 25 (5-6) (2025)
https://doi.org/10.1007/s43452-025-01324-1

Experimental investigation of the dependence of void nucleation and growth on initial microstructure in high-purity titanium under tension

Nicholas Pitkin, Brian M. Patterson and Marko Knezevic
Materials Characterization 229 115511 (2025)
https://doi.org/10.1016/j.matchar.2025.115511

Effect of high-strain cold rolling on microstructure, texture, and mechanical properties of pure zinc for biomedical applications

Jin Cui, Hengyang Yu, Yong Gong, Poorva Sharma, Ashwini Kumar and Lianjun Sun
Materials Research Express 12 (7) 076504 (2025)
https://doi.org/10.1088/2053-1591/ade930

Transmutation of zonal twinning dislocations during non-cozone {101¯1} twin-twin interaction in magnesium

Peng Chen and Bin Li
Journal of Magnesium and Alloys 13 (2) 681 (2025)
https://doi.org/10.1016/j.jma.2024.01.032

A significant improvement in corrosion resistance and mechanical properties of Cu-containing nanocrystalline Ti-Mo-Nb-Ta refractory complex concentrated alloy

Solomon-Oshioke Agbedor, Ding Gao, Kaiyang Li, Qian Lei, Aqsa Kanwal, Igbafen Emmanuel Ohiomomo, Shaohua Xing, Jian Hou, Mingxian Sun and Hong Wu
Corrosion Science 246 112737 (2025)
https://doi.org/10.1016/j.corsci.2025.112737

Unveiling the bending deformation behaviors of Mg alloys with tilted textures through a biaxial tension analysis approach

Gyo Myeong Lee, Hyun Ji Kim, Jong Un Lee, Gun Woong An and Sung Hyuk Park
Journal of Alloys and Compounds 181374 (2025)
https://doi.org/10.1016/j.jallcom.2025.181374

A new strain gradient viscoplastic self-consistent crystal plasticity model for predicting geometrically necessary dislocations and length-scale dependent mechanical response

Iftekhar A. Riyad and Marko Knezevic
International Journal of Engineering Science 217 104396 (2025)
https://doi.org/10.1016/j.ijengsci.2025.104396

Shear localization in gradient high-entropy alloy at high strain rates: Crystal plasticity modeling

Chuan-zhi Liu, Qi-lin Xiong and Wen An
Extreme Mechanics Letters 70 102194 (2024)
https://doi.org/10.1016/j.eml.2024.102194

Investigation of enhanced strength anisotropy in an extruded Mg–Al–Ca–Mn alloy at cryogenic temperature

Ming-Yu Li, Zhi-Ping Guan, Li-Ping Liu, Hong-Jie Jia, Zhi-Gang Li, Ming-Hui Wang, Pin-Kui Ma and Jia-Wang Song
Materials Science and Engineering: A 890 145940 (2024)
https://doi.org/10.1016/j.msea.2023.145940

Microstructure evolution and twinning-induced plasticity (TWIP) in hcp rare-earth high- and medium-entropy alloys (HEAs and MEAs) due to tensile deformation

Laura Rosenkranz, Qianqian Lan, Milan Heczko, Ashton J. Egan, Michael J. Mills, Michael Feuerbacher and Uwe Glatzel
Journal of Applied Physics 136 (2) (2024)
https://doi.org/10.1063/5.0207181

Double-peak strain hardening behavior of Mg–1.2 wt.%Y alloy

Bo Guan, Li Wang, Yunchang Xin, Peidong Wu, Jing Xu, Xiaoxu Huang and Qing Liu
International Journal of Plasticity 179 104041 (2024)
https://doi.org/10.1016/j.ijplas.2024.104041

Anisotropic and heterogeneous acoustoplasticity of α-Ti during ultrasonic vibration assisted compression: Modeling and experiments

Haidong Zhang, Lei Deng, Yi Hao, Cheng Li, Xuefeng Tang, Pan Gong, Mao Zhang, Junsong Jin and Xinyun Wang
International Journal of Plasticity 173 103886 (2024)
https://doi.org/10.1016/j.ijplas.2024.103886

Anisotropic strain hardening in an extruded lean Mg-Al-Ca-Mn alloy

Ming-Yu Li, Zhi-Ping Guan, Peng Chen, Ming-Wen Ren, Gang Wang, Wei Yan, Po Zhao and Jia-Wang Song
Materials & Design 239 112770 (2024)
https://doi.org/10.1016/j.matdes.2024.112770

Deformation Behavior of 3D‐Printed High‐Entropy Alloys: A Critical Review

Dhruv Bajaj, Aihan Feng, Shoujiang Qu, Zhuo Chen, Dongyang Li and Daolun L. Chen
Advanced Engineering Materials 26 (4) (2024)
https://doi.org/10.1002/adem.202300615

Strengthening of HCP metals with split basal texture through non-dislocation hardening mechanism

Yoshiki Kawano, Tsuyoshi Mayama and Masatoshi Mitsuhara
Materials Today Communications 41 110947 (2024)
https://doi.org/10.1016/j.mtcomm.2024.110947

Hong Wu, Solomon-Oshioker Agbedor, Ding Gao, Kaiyang Li, Qian Lei, Aqsa Kanwal, Igbafen Emmanuel Ohiomomo, Shaohua Xing, Jian Hou and Mingxian Sun
(2024)
https://doi.org/10.2139/ssrn.5028237

Synthesis and characterization of polycrystalline SnSe/SnSe2 heterophase thermoelectric thin films via chemical spray pyrolysis

P. Bhagyashree, Ashna K. Promod, M. Venkatesan, Anuradha M. Ashok, Dhanalakshmi Sathishkumar and B. Geetha Priyadarshini
Journal of Materials Science: Materials in Electronics 35 (29) (2024)
https://doi.org/10.1007/s10854-024-13655-5

Mechanical Properties and Martensitic Transformation Behavior of 316LN Stainless Steel Under Cryogenic Deformation

Bixi Li, Hengcheng Zhang, Shanshan Wu, Liancheng Xie, Fuzhi Shen, Jijun Xin, Chuanjun Huang, Wei Wang and Laifeng Li
steel research international 95 (10) (2024)
https://doi.org/10.1002/srin.202400330

A constitutive model incorporating the interplay of dynamic recrystallization and twinning during hot deformation of AZ31 magnesium alloy

Famei Liu, Xuefeng Tang, Junsong Jin, Lei Deng, Xinyun Wang, Jinchuan Long and Fangtao Chai
Journal of Materials Research and Technology 28 1990 (2024)
https://doi.org/10.1016/j.jmrt.2023.12.140

Effects of surface roughness on bending properties of rolled AZ31 alloy

Gyo Myeong Lee, Jong Un Lee and Sung Hyuk Park
Journal of Magnesium and Alloys 11 (4) 1224 (2023)
https://doi.org/10.1016/j.jma.2021.11.029

The hardening effect of deformation twinning based on visco-plastic self consistent model and a multi-scale grain refinement prediction model during machining of titanium alloy

Qingqing Wang, Chaoyang Niu, Zhanqiang Liu, Yanqing Wang, Yanhai Cheng and Yongkang Cui
Journal of Materials Research and Technology 26 1922 (2023)
https://doi.org/10.1016/j.jmrt.2023.08.007

Microstructure and deformation behavior of MoReW in the temperature range from 25°C to 1500°C

O.N. Senkov, S.I. Rao, G.H. Balbus, R. Wheeler and E.J. Payton
Materialia 27 101688 (2023)
https://doi.org/10.1016/j.mtla.2023.101688

Toughening Thermoelectric Materials: From Mechanisms to Applications

Luoqi Wu, Xiaobin Feng, Ke Cao and Guodong Li
International Journal of Molecular Sciences 24 (7) 6325 (2023)
https://doi.org/10.3390/ijms24076325

Self-Consistent Crystal Plasticity Modeling of Slip-Twin Interactions in Mg Alloys

Mukti Patel, YubRaj Paudel, Shiraz Mujahid, Hongjoo Rhee and Haitham El Kadiri
Crystals 13 (4) 653 (2023)
https://doi.org/10.3390/cryst13040653

Shear localization in polycrystalline metal at high-strain rates with dynamic recrystallization: Crystal plasticity modeling and texture effect

Wen An, Chuan-zhi Liu, Qi-lin Xiong, Zhenhuan Li, Xicheng Huang and Tao Suo
International Journal of Plasticity 165 103616 (2023)
https://doi.org/10.1016/j.ijplas.2023.103616

The temperature dependence of cyclic dynamic recrystallization in as-extruded pure zinc

M. Chegini, S.M. Fatemi, N. Mollaei and W. Bednarczyk
Journal of Materials Research and Technology 26 9370 (2023)
https://doi.org/10.1016/j.jmrt.2023.09.266

Distinct origins of deformation twinning in an additively-manufactured high-entropy alloy

D. Bajaj, Z. Chen, S.J. Qu, A.H. Feng, D.Y. Li and D.L. Chen
Additive Manufacturing 74 103716 (2023)
https://doi.org/10.1016/j.addma.2023.103716

Underlying mechanisms of variation in yield asymmetry and strain hardening behavior of extruded pure Mg with Gd addition

Gyo Myeong Lee and Sung Hyuk Park
Journal of Magnesium and Alloys 11 (6) 2165 (2023)
https://doi.org/10.1016/j.jma.2022.09.008

Simulation of Mechanical Response in Machining of Ti-6Al-4V Based on Finite Element Model and Visco-Plastic Self-Consistent Model

Qingqing Wang, Chengli Yang, Haifeng Yang and Yibo He
Metals 13 (8) 1362 (2023)
https://doi.org/10.3390/met13081362

Microstructure and activation volume of a Cu-6 wt %Zn brass processed by equal channel angular pressing

Amina Turki, Bruno Guelorget, Virgil Optasanu, Manuel François, Frédéric Herbst and Nabil Njah
Journal of Alloys and Compounds 968 171974 (2023)
https://doi.org/10.1016/j.jallcom.2023.171974

Twinning, dynamic recrystallization, and texture evolution in as-solution AZ80 Mg alloy during hot compression

Yinghao Feng, Lingyun Qian, Chaoyang Sun, Sinuo Xu, Nanyang Zhu, Chunhui Wang and Yang Liu
Journal of Materials Research and Technology 25 5159 (2023)
https://doi.org/10.1016/j.jmrt.2023.07.004

Effect of twinning deformation on work hardening in commercially pure titanium

Genki Tsukamoto, Tomonori Kunieda, Masatoshi Mitsuhara and Hideharu Nakashima
Materials Science and Engineering: A 840 142907 (2022)
https://doi.org/10.1016/j.msea.2022.142907

Strengthening magnesium by design: Integrating alloying and dynamic processing

Suhas Eswarappa Prameela, Peng Yi, Yannick Hollenweger, Burigede Liu, Joey Chen, Laszlo Kecskes, Dennis M. Kochmann, Michael L. Falk and Timothy P. Weihs
Mechanics of Materials 167 104203 (2022)
https://doi.org/10.1016/j.mechmat.2021.104203

Study of size effect on anisotropic deformation behavior of rolled α-Ti sheet

Haidong Zhang, Xuefeng Tang, Lei Deng, Fei Du, Mao Zhang, Junsong Jin and Xinyun Wang
Materials Science and Engineering: A 846 143282 (2022)
https://doi.org/10.1016/j.msea.2022.143282

Anisotropy of wrought magnesium alloys: A focused overview

Baodong Shi, Chong Yang, Yan Peng, Fucheng Zhang and Fusheng Pan
Journal of Magnesium and Alloys 10 (6) 1476 (2022)
https://doi.org/10.1016/j.jma.2022.03.006

Evolution of microstructure and texture in the stir zone of commercially pure titanium during friction stir processing

Abhishek Kumar Singh, Lalit Kaushik, Jaiveer Singh, Hrishikesh Das, Mounarik Mondal, Sung-Tae Hong and Shi-Hoon Choi
International Journal of Plasticity 150 103184 (2022)
https://doi.org/10.1016/j.ijplas.2021.103184

Bending-deformation-induced inhomogeneous aging behavior and accelerated precipitation kinetics of extruded AZ80 alloy

Gyo Myeong Lee, Jong Un Lee and Sung Hyuk Park
Journal of Alloys and Compounds 918 165613 (2022)
https://doi.org/10.1016/j.jallcom.2022.165613

Detwinning of face-centered cubic deformation twins at liquid nitrogen temperature

M.J. Szczerba, S. Sumara, M. Faryna and M.S. Szczerba
Materials Science and Engineering: A 832 142395 (2022)
https://doi.org/10.1016/j.msea.2021.142395

Quasi in situ observation of twinning evolution during strain path change in magnesium alloy

Yuzhi Zhu, Xiaohua Chen, Kaixuan Chen, Yanlin Wang and Zidong Wang
Journal of Materials Research 37 (5) 1125 (2022)
https://doi.org/10.1557/s43578-022-00507-3

Effect of notch severity and crystallographic texture on local deformation and damage in commercially pure titanium

Vivek Kumar Sahu, Manasij Yadava, Pritam Chakraborty and Nilesh Prakash Gurao
International Journal of Plasticity 155 103318 (2022)
https://doi.org/10.1016/j.ijplas.2022.103318

Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction

E. Polatidis, S. Shukla, J. Čapek, S. Van Petegem, N. Casati and R.S. Mishra
Materials Today Communications 30 103155 (2022)
https://doi.org/10.1016/j.mtcomm.2022.103155

An efficient temperature-dependent crystal plasticity framework for pure magnesium with emphasis on the competition between slip and twinning

Yannick Hollenweger and Dennis M. Kochmann
International Journal of Plasticity 159 103448 (2022)
https://doi.org/10.1016/j.ijplas.2022.103448

Recrystallization mechanisms, grain refinement, and texture evolution during ECAE processing of Mg and its alloys

Laszlo J. Kecskes, Nicholas M. Krywopusk, Yannick Hollenweger, Jenna N. Krynicki, Suhas Eswarappa Prameela, Peng Yi, Burigede Liu, Michael L. Falk, Dennis M. Kochmann and Timothy P. Weihs
Mechanics of Materials 162 104067 (2021)
https://doi.org/10.1016/j.mechmat.2021.104067

Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy

Xiaoqian Guo, Chao Ma, Lingyu Zhao, Adrien Chapuis, Qing Liu and Peidong Wu
Materials Science and Engineering: A 800 140384 (2021)
https://doi.org/10.1016/j.msea.2020.140384

A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31

William G. Feather, Daniel J. Savage and Marko Knezevic
International Journal of Plasticity 143 103031 (2021)
https://doi.org/10.1016/j.ijplas.2021.103031

Stress and Strain Effect on Defect Structure Parameters of Single Crystals in Cu–12 at.% Al Alloy

S. V. Starenchenko, Yu. V. Solov’eva, V. A. Starenchenko and А. N. Solov’ev
Russian Physics Journal 64 (4) 625 (2021)
https://doi.org/10.1007/s11182-021-02380-9

Twinning characteristics in rolled AZ31B magnesium alloy under three stress states

Luiz Carneiro, Duke Culbertson, Xianyun Zhu, Qin Yu and Yanyao Jiang
Materials Characterization 175 111050 (2021)
https://doi.org/10.1016/j.matchar.2021.111050

Effect of texture and temperature gradient on anisotropic plastic deformation of commercially pure titanium at room and low temperatures

Min-Su Lee, Min-Ki Ji, Yong-Taek Hyun, Eun-Young Kim and Tea-Sung Jun
Materials Characterization 172 110834 (2021)
https://doi.org/10.1016/j.matchar.2020.110834

Analysis of strain hardening behavior in a ductile Mg–Yb based alloy

Deping Zhang, Dongdong Zhang, Yaqin Zhang, Shanrong Chen, Tao Xu and Jian Meng
Materials Science and Engineering: A 819 141462 (2021)
https://doi.org/10.1016/j.msea.2021.141462

Achieving an exceptional ductility at room temperature in a low SFE copper alloy fabricated by severe plastic deformation

Seyed Elias Mousavi, Ali Sonboli, Mahmood Meratian, Mohabbat Amirnejad, Seyed Hadi Mohamadi Azghandi and Paul Munroe
Materials Science and Engineering: A 802 140654 (2021)
https://doi.org/10.1016/j.msea.2020.140654

Loading Mode Dependence of {$$10\bar{1}2$$} Twin Variant Selection in a Rolled Mg-Al-Zn Alloy

Longhui Mao, Chuming Liu, Yingchun Wan, et al.
Journal of Materials Engineering and Performance 30 (11) 7979 (2021)
https://doi.org/10.1007/s11665-021-06010-w

Asymmetric tension-compression mechanical behavior of the as-cast Mg-4.58Zn-2.6Gd-0.16Zr alloy

Lei Xiao, Guangyu Yang, He Qin, Jiaqi Ma and Wanqi Jie
Materials Science and Engineering: A 801 140439 (2021)
https://doi.org/10.1016/j.msea.2020.140439

On the {101‾1} twin-accommodated mechanisms in equiaxed near β-Ti alloys operating by unidirectional and cross rolling

Wei Chen, Yaping Lv, Hande Wang, Xiaoyong Zhang, Chao Chen, Y.C. Lin and Kechao Zhou
Materials Science and Engineering: A 769 138516 (2020)
https://doi.org/10.1016/j.msea.2019.138516

Influence of process parameters on the microstructural evolution and mechanical characterisations of friction stir welded Al-Mg-Si alloy

Omar S. Salih, Nigel Neate, Hengan Ou and W. Sun
Journal of Materials Processing Technology 275 116366 (2020)
https://doi.org/10.1016/j.jmatprotec.2019.116366

Detwinning-mediated hardening in Mg: A microcompression study of a single twin boundary

Mohammadhadi Maghsoudi, Markus Ziehmer and Erica T. Lilleodden
Materials Science and Engineering: A 772 138747 (2020)
https://doi.org/10.1016/j.msea.2019.138747

Effect of Initial Texture on the Evolution of Microstructure and Texture During Rolling of Commercially Pure Titanium at Room and Cryogenic Temperature

Vivek Kumar Sahu, Shubham Gupta and N. P. Gurao
Metallurgical and Materials Transactions A 51 (11) 5848 (2020)
https://doi.org/10.1007/s11661-020-05979-8

Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach

Sudeep K. Sahoo, Somjeet Biswas, Laszlo S. Toth, P.C. Gautam and Benoît Beausir
International Journal of Plasticity 128 102660 (2020)
https://doi.org/10.1016/j.ijplas.2020.102660

Balancing strength and ductility by controllable heat-treatment twinning in a near β-Ti alloy

Wei Chen, Y.C. Lin, Xiaoyong Zhang and Kechao Zhou
Journal of Materials Research and Technology 9 (3) 6962 (2020)
https://doi.org/10.1016/j.jmrt.2020.04.045

Split sleeve cold expansion of AZ31B sheet: Microstructure, texture and residual stress

Sasan Faghih, Sugrib Kumar Shaha, Seyed Behzad Behravesh and Hamid Jahed
Materials & Design 186 108213 (2020)
https://doi.org/10.1016/j.matdes.2019.108213

Detwinning-twinning behavior during compression of face-centered cubic twin-matrix layered microstructure

M.J. Szczerba, S. Kopacz and M.S. Szczerba
Materials Science and Engineering: A 795 139960 (2020)
https://doi.org/10.1016/j.msea.2020.139960

Phase structures of gas atomized equiatomic CrFeNiMn high entropy alloy powder

Joonas Lehtonen, Yanling Ge, Nevaf Ciftci, Oleg Heczko, Volker Uhlenwinkel and Simo-Pekka Hannula
Journal of Alloys and Compounds 827 154142 (2020)
https://doi.org/10.1016/j.jallcom.2020.154142

Research on the processes of deformation and failure in coarse- and ultrafine-grain states of Zr1–Nb alloys by digital image correlation and infrared thermography

Yu.P. Sharkeev, V.P. Vavilov, V.A. Skrypnyak, E.V. Legostaeva, A. Yu Eroshenko, O.A. Belyavskaya, A.M. Ustinov, A.A. Klopotov, A.O. Chulkov, A.A. Kozulin, V.V. Skrypnyak, A. Yu Zhilyakov, V.P. Kouznetsov and M.V. Kuimova
Materials Science and Engineering: A 784 139203 (2020)
https://doi.org/10.1016/j.msea.2020.139203

Twinning-induced anisotropy of mechanical response of AZ31B extruded rods

Karol Frydrych, Michał Maj, Leszek Urbański and Katarzyna Kowalczyk-Gajewska
Materials Science and Engineering: A 771 138610 (2020)
https://doi.org/10.1016/j.msea.2019.138610

Effects of CaO addition and strain rate on the texture evolution of AZ31 alloy

Hyeon-Woo Son, Ji-Woon Lee and Soong-Keun Hyun
Materials Science and Engineering: A 744 724 (2019)
https://doi.org/10.1016/j.msea.2018.12.091

Twinning and its effect on the evolution of acicular α in Ti–5Al–5Mo–5V–3Cr–1Zr

Shaojun Li, Yaping Lv, Xiaoyong Zhang, Chao Chen and Kechao Zhou
Materials Science and Technology 35 (7) 839 (2019)
https://doi.org/10.1080/02670836.2019.1593605

Tension–Compression Asymmetry of Commercially Pure Titanium: Strain Rate Sensitivity and Microstructure Evolution

Jiahui Tao, Boqin Gu, Lili Chen and Jianfeng Zhou
JOM 71 (7) 2280 (2019)
https://doi.org/10.1007/s11837-019-03466-z

An analytical model to predict strain-hardening behaviour and twin volume fraction in a profoundly twinning magnesium alloy

Sudeep K. Sahoo, Laszlo S. Toth and Somjeet Biswas
International Journal of Plasticity 119 273 (2019)
https://doi.org/10.1016/j.ijplas.2019.04.007

Dislocation induced twin growth and formation of basal stacking faults in {101¯2} twins in pure Mg

Fulin Wang, Christopher D. Barrett, Rodney J. McCabe, Haitham El Kadiri, Laurent Capolungo and Sean R. Agnew
Acta Materialia 165 471 (2019)
https://doi.org/10.1016/j.actamat.2018.12.003

Effect of twinned-structure on deformation behavior and correlated mechanical properties in a metastable β-Ti alloy

Sumin Shin, Chaoyi Zhu and Kenneth S. Vecchio
Journal of Alloys and Compounds 811 152054 (2019)
https://doi.org/10.1016/j.jallcom.2019.152054

On the Strain-Hardening Behavior and Twin-Induced Grain Refinement of CP-Ti Under Ambient Temperature Compression

Devesh Kumar Chouhan, Alok Kumar Singh, Somjeet Biswas and Chandan Mondal
Metallurgical and Materials Transactions A 50 (5) 2169 (2019)
https://doi.org/10.1007/s11661-019-05181-5

Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy

Wei Chen, Chao Li, Xiaoyong Zhang, et al.
Journal of Alloys and Compounds 783 709 (2019)
https://doi.org/10.1016/j.jallcom.2018.12.262

Misfit strain induced phase transformation at a basal/prismatic twin boundary in deformation of magnesium

Peng Chen, Fangxi Wang and Bin Li
Computational Materials Science 164 186 (2019)
https://doi.org/10.1016/j.commatsci.2019.04.020

Understanding the growth of ZnTe nanorods by mechanochemical synthesis: the role of structural defects

H. Rojas-Chávez, Rurik Farías, H. Cruz-Martínez, et al.
Journal of Materials Science: Materials in Electronics 30 (12) 11291 (2019)
https://doi.org/10.1007/s10854-019-01476-w

Characteristic dislocation substructure in 101¯2 twins in hexagonal metals

F. Wang, K. Hazeli, K.D. Molodov, C.D. Barrett, T. Al-Samman, D.A. Molodov, A. Kontsos, K.T. Ramesh, H. El Kadiri and S.R. Agnew
Scripta Materialia 143 81 (2018)
https://doi.org/10.1016/j.scriptamat.2017.09.015

Deformation behavior of austenitic stainless steel at deep cryogenic temperatures

Wentuo Han, Yuchen Liu, Farong Wan, Pingping Liu, Xiaoou Yi, Qian Zhan, Daniel Morrall and Somei Ohnuki
Journal of Nuclear Materials 504 29 (2018)
https://doi.org/10.1016/j.jnucmat.2018.03.019

EBSD analysis of surface and bulk microstructure evolution during interrupted tensile testing of a Fe-19Cr-12Ni alloy

K. Yvell, T.M. Grehk, P. Hedström, A. Borgenstam and G. Engberg
Materials Characterization 141 8 (2018)
https://doi.org/10.1016/j.matchar.2018.04.035

Quantitative analysis on friction stress of hot-extruded AZ31 magnesium alloy at room temperature

Ling Wang, Yiquan Zhao, Jing Zhang, Ru Ma, Yandong Liu, Yinong Wang, Qun Zhang, Weigang Li and Yuan Zhang
Journal of Materials Science & Technology 34 (10) 1765 (2018)
https://doi.org/10.1016/j.jmst.2018.02.011

Negligible effect of twin-slip interaction on hardening in deformation of a Mg-3Al-1Zn alloy

Peng Chen, Bin Li, Duke Culbertson and Yanyao Jiang
Materials Science and Engineering: A 729 285 (2018)
https://doi.org/10.1016/j.msea.2018.05.067

Effect of temperature on the selection of deformation modes in Zircaloy-4

G. Bharat Reddy, Apu Sarkar, Rajeev Kapoor and Anand K. Kanjarla
Materials Science and Engineering: A 734 210 (2018)
https://doi.org/10.1016/j.msea.2018.07.094

Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copper

Dong-Hyun Ahn, Minju Kang, Lee Ju Park, Sunghak Lee and Hyoung Seop Kim
Materials Science and Engineering: A 684 567 (2017)
https://doi.org/10.1016/j.msea.2016.12.091

Misorientation-Dependent Twinning Induced Hardening and Texture Evolution of TWIP Steel Sheet in Plastic Deformation Process

Ning Guo, Chaoyang Sun, Mingwang Fu and Mingchuan Han
Metals 7 (9) 348 (2017)
https://doi.org/10.3390/met7090348