Influence of tramp elements in the production of high quality steels using the scrap/electric arc furnace route
Rev. Met. Paris, 94 11 (1997) 1369-1384
Published online: 2017-01-17
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel
L. Hatzenbichler, C. Vincely, P. Haslberger, M. Galler, O. Glushko, D. Holec, H. Clemens and R. SchnitzerPractical Metallography 62 (3) 148 (2025)
https://doi.org/10.1515/pm-2025-0010
Effect of Residual Elements during the Hot‐Working Process of Steel Production: A Critical Review
Ishwar Kapoor, Claire Davis and Zushu Listeel research international 95 (9) (2024)
https://doi.org/10.1002/srin.202400116
Effect of Sn on Microstructure Evolution of a HSLA Steel
Zhaoqi Song, Haitao Zhao, Li Yang, Kaixun Wang, Junheng Gao, Honghui Wu, Guilin Wu, Chaolei Zhang, Yuhe Huang, Shuize Wang and Xinping MaoMetallurgical and Materials Transactions A 55 (10) 3956 (2024)
https://doi.org/10.1007/s11661-024-07528-z
13 (2023)
https://doi.org/10.1007/978-3-031-43684-0_2
285 (2023)
https://doi.org/10.1007/978-3-031-43684-0_7
Monitoring of less-common residual elements in scrap feeds for EAF steelmaking
Augusta Martinelli Miranda, Paulo Santos Assis, Geoffrey Alan Brooks, et al.Ironmaking & Steelmaking 46 (7) 598 (2019)
https://doi.org/10.1080/03019233.2019.1601851
The Casting Powders Book
Kenneth C. Mills and Carl-Åke DäckerThe Casting Powders Book 417 (2017)
https://doi.org/10.1007/978-3-319-53616-3_11
Toward the efficient recycling of alloying elements from end of life vehicle steel scrap
Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Yasushi Kondo, Shinichiro Nakamura and Tetsuya NagasakaResources, Conservation and Recycling 100 11 (2015)
https://doi.org/10.1016/j.resconrec.2015.04.001
Unintentional Flow of Alloying Elements in Steel during Recycling of End‐of‐Life Vehicles
Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Shinichiro Nakamura and Tetsuya NagasakaJournal of Industrial Ecology 18 (2) 242 (2014)
https://doi.org/10.1111/jiec.12095
Quality- and Dilution Losses in the Recycling of Ferrous Materials from End-of-Life Passenger Cars: Input-Output Analysis under Explicit Consideration of Scrap Quality
Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, et al.Environmental Science & Technology 46 (17) 9266 (2012)
https://doi.org/10.1021/es3013529
Evaluation of the Hot Ductility of a C–Mn Steel Produced from Scrap Recycling
Jessica Calvo, José María Cabrera, Ahmad Rezaeian and Stephen YueISIJ International 47 (10) 1518 (2007)
https://doi.org/10.2355/isijinternational.47.1518
Supply Loops and Their Constraints: The Industrial Ecology of Recycling and Reuse
Roland Geyer and Tim JacksonCalifornia Management Review 46 (2) 55 (2004)
https://doi.org/10.2307/41166210