EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Rev. Met. Paris, 94 12 (1997) 1467-1474 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Experimental and Finite Element Analysis of Asymmetric Rolling of 6061 Aluminum Alloy Using Two-Scale Elasto-Plastic Constitutive Relation

M. Wronski, K. Wierzbanowski, S. Wronski, B. Bacroix and P. Lipinski
Archives of Metallurgy and Materials 62 (4) 1991 (2017)
https://doi.org/10.1515/amm-2017-0297

Microstructure, texture and mechanical characteristics of asymmetrically rolled polycrystalline copper

A. Uniwersał, M. Wróbel, K. Wierzbanowski, et al.
Materials Characterization 118 575 (2016)
https://doi.org/10.1016/j.matchar.2016.07.004

Effect of Asymmetric Cold Rolling on Texture of a Commercially Pure Copper

A. Uniwersał, M. Wróbel, K. Wierzbanowski and M. Wroński
Acta Physica Polonica A 130 (4) 1049 (2016)
https://doi.org/10.12693/APhysPolA.130.1049

Microstructure and texture of asymmetrically rolled aluminium and titanium after deformation and recrystallization

M Wronski, K Wierzbanowski, S Wronski and B Bacroix
IOP Conference Series: Materials Science and Engineering 89 012050 (2015)
https://doi.org/10.1088/1757-899X/89/1/012050

Asymmetric rolling textures of aluminium studied with crystalline model implemented into FEM

M Wronski, K Wierzbanowski, B Bacroix and P Lipinski
IOP Conference Series: Materials Science and Engineering 82 012012 (2015)
https://doi.org/10.1088/1757-899X/82/1/012012

Effect of rolling asymmetry on selected properties of grade 2 titanium sheet

M. Wroński, K. Wierzbanowski, M. Wróbel, S. Wroński and B. Bacroix
Metals and Materials International 21 (5) 805 (2015)
https://doi.org/10.1007/s12540-015-5094-2

Quantitative comparison between simulated and experimental FCC rolling textures

M Wroński, K Wierzbanowski and T Leffers
IOP Conference Series: Materials Science and Engineering 82 012011 (2015)
https://doi.org/10.1088/1757-899X/82/1/012011

Modeling of recrystallization texture of aluminium: symmetric and asymmetric rolling

K Wierzbanowski, M Kotra, M Wronski, et al.
IOP Conference Series: Materials Science and Engineering 82 012039 (2015)
https://doi.org/10.1088/1757-899X/82/1/012039

Study of texture, microstructure and mechanical properties of asymmetrically rolled aluminium

M Wronski, K Wierzbanowski, S Wronski, et al.
IOP Conference Series: Materials Science and Engineering 82 012074 (2015)
https://doi.org/10.1088/1757-899X/82/1/012074

Texture variation in asymmetrically rolled titanium. Study by Finite Element Method with implemented crystalline model

M. Wronski, K. Wierzbanowski, S. Wronski, B. Bacroix and P. Lipinski
International Journal of Mechanical Sciences 87 258 (2014)
https://doi.org/10.1016/j.ijmecsci.2014.06.010

FCC Rolling Textures Reviewed in the Light of Quantitative Comparisons between Simulated and Experimental Textures

Krzysztof Wierzbanowski, Marcin Wroński and Torben Leffers
Critical Reviews in Solid State and Materials Sciences 39 (6) 391 (2014)
https://doi.org/10.1080/10408436.2014.899485

Effect of asymmetric rolling on mechanical characteristics, texture and misorientations in ferritic steel

Wroński Sebastian, Wierzbanowski Krzysztof, Bacroix Brigitte, Chauveau Thierry and Wróbel Mirosław
Journal of Central South University 20 (6) 1443 (2013)
https://doi.org/10.1007/s11771-013-1633-5

Effect of Intergranular Interaction and Lattice Rotation on Predicted Residual Stress and Textures. Case of Austenite and Ferrite

Krzysztof Wierzbanowski, Marcin Wronski, Andrzej Baczmanski, et al.
Materials Science Forum 772 97 (2013)
https://doi.org/10.4028/www.scientific.net/MSF.772.97

Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture

A. Baczmanski, L. Le Joncour, B. Panicaud, et al.
Journal of Applied Crystallography 44 (5) 966 (2011)
https://doi.org/10.1107/S0021889811025957

Problem of Lattice Rotation Due to Plastic Deformation. Example of Rolling of f.c.c Materials

K. Wierzbanowski, M. Wroński, A. Baczmański, et al.
Archives of Metallurgy and Materials 56 (3) 575 (2011)
https://doi.org/10.2478/v10172-011-0061-5

Determination of the stress field in textured duplex steel using the TOF neutron diffraction method

S. Wroński, A. Baczmański, R. Dakhlaoui, et al.
Acta Materialia 55 (18) 6219 (2007)
https://doi.org/10.1016/j.actamat.2007.07.044

Recent Advances in Experimental Mechanics

A. Baczmanski, C. Braham, R. Levy-Tubiana, A. Lodini and K. Wierzbanowski
Recent Advances in Experimental Mechanics 477 (2004)
https://doi.org/10.1007/0-306-48410-2_45

Multi-reflection method and grazing incidence geometry used for stress measurement by X-ray diffraction

A Baczmanski, C Braham, W Seiler and N Shiraki
Surface and Coatings Technology 182 (1) 43 (2004)
https://doi.org/10.1016/j.surfcoat.2003.07.005

Relaxation of thermal mismatch stress due to plastic deformation in an Al/SiCp metal matrix composite

R Levy-Tubiana, A Baczmanski and A Lodini
Materials Science and Engineering: A 341 (1-2) 74 (2003)
https://doi.org/10.1016/S0921-5093(02)00204-6

Microstresses in textured polycrystals studied by the multireflection diffraction method and self-consistent model

A. Baczmański, C. Braham and W. Seiler
Philosophical Magazine 83 (28) 3225 (2003)
https://doi.org/10.1080/14786430310001604985