Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Raagul Seenivasan, Praveen Halagali, Jey Kumar Pachiyappan, Anitha Marimuthu, Himanshu Sharma, Preethi Somanna, Rashmi Pathak, Sachin N. Kothawade and Vamshi Krishna Tippavajhala
1 (2026)
https://doi.org/10.1007/978-3-032-00365-2_1

Quantitative characterization of the lateral distribution of gold nanoparticles in polystyrene nanocomposite thin films by laser-induced breakdown spectroscopy elemental mapping

F.A. Casian-Plaza, O. Urbán, Á. Bélteki, M. Aladi, M. Kedves, A. Bonyár, J. Kopniczky, M. Veres and G. Galbács
Applied Surface Science 700 163276 (2025)
https://doi.org/10.1016/j.apsusc.2025.163276

Nanofillers tailored polymers and enhanced synergistic properties for engineering applications: A review

Biniam Tamrea Gebretsadik and Addisu Negash Ali
Journal of Polymer Research 31 (11) (2024)
https://doi.org/10.1007/s10965-024-04165-3

Investigation of properties and applications of ZnO polymer nanocomposites

Ashwini Asture, Varun Rawat, Chandramohan Srivastava and Dipti Vaya
Polymer Bulletin 80 (4) 3507 (2023)
https://doi.org/10.1007/s00289-022-04243-w

Bruno Leandro Pereira, Viviane Seba Sampaio, Gabriel Goetten de Lima, Carlos Maurício Lepienski, Mozart Marins, Bor Shin Chee and Michael J. D. Nugent
179 (2023)
https://doi.org/10.1002/9781119593218.ch7

Synthesis, structure and features of formation of biphasic hybrid polymer compositions based on bentonite

Galymzhan Mamytbekov, Eldar Zhakanbaev, Ernat Nurtazin and Victor Glushenko
Chemical Bulletin of Kazakh National University (3) 42 (2022)
https://doi.org/10.15328/cb1280

Preparation of Polypropylene Organically Modified Clay Nanocomposites with Enhanced Physico-Chemical Properties

Marwa E. Abdel Aziz, Gamal R. Saad and Malak T. Abou El-khair
Macromolecular Research 30 (12) 900 (2022)
https://doi.org/10.1007/s13233-022-0099-4

Polymeric and Natural Composites

Jyotendra Nath, Kashma Sharma, Shashikant Kumar, Vijay Kumar and Rakesh Sehgal
Advances in Material Research and Technology, Polymeric and Natural Composites 109 (2022)
https://doi.org/10.1007/978-3-030-70266-3_4

Effect of nano-fillers on low-velocity impact properties of synthetic and natural fibre reinforced polymer composites- a review

Smaranika Nayak, Ramesh Kumar Nayak and Isham Panigrahi
Advances in Materials and Processing Technologies 8 (3) 2963 (2022)
https://doi.org/10.1080/2374068X.2021.1945293

An Investigative Study on the Progress of Nanoclay-Reinforced Polymers: Preparation, Properties, and Applications: A Review

Dalia E. Abulyazied and Antoaneta Ene
Polymers 13 (24) 4401 (2021)
https://doi.org/10.3390/polym13244401

Recent Developments in Polymer Nanocomposite-Based Electrochemical Sensors for Detecting Environmental Pollutants

Somayeh Tajik, Hadi Beitollahi, Fariba Garkani Nejad, et al.
Industrial & Engineering Chemistry Research 60 (3) 1112 (2021)
https://doi.org/10.1021/acs.iecr.0c04952

Impact of exfoliation/intercalation of nano-clay on structure, morphology and electrical properties of poly (ethylene oxide) based solid nanocomposite electrolytes

Mou Saha, Ruma Ray, Anupa Roy Choudhury, Poulami De Bhowmik and Tapas Kumar Ballabh
Journal of Polymer Research 28 (8) (2021)
https://doi.org/10.1007/s10965-021-02622-x

COMPARATIVE STUDY OF THE EFFECT OF GAMMA-RADIATION ON THE STRUCTURAL AND THERMOPHYSICAL PROPERTIES OF NITRILE-BUTADIENE RUBBER FILLED WITH DIFFERENT NANOMETAL OXIDES

R.F. Khankishiyeva, S.M. Mammadov, H.N. Akhundzada, et al.
Problems of Atomic Science and Technology 39 (2020)
https://doi.org/10.46813/2020-126-039

Conducting copolymers nanocomposite coatings with aggregation-controlled luminescence and efficient corrosion inhibition properties

Kamal I. Aly, Osama Younis, Mahmoud H. Mahross, Esam A. Orabi, Mohamed Abdel-Hakim, Osamu Tsutsumi, Mohamed Gamal Mohamed and Marwa M. Sayed
Progress in Organic Coatings 135 525 (2019)
https://doi.org/10.1016/j.porgcoat.2019.06.001

Galvanically Stimulated Degradation of Carbon-Fiber Reinforced Polymer Composites: A Critical Review

Stanley Udochukwu Ofoegbu, Mário G.S. Ferreira and Mikhail L. Zheludkevich
Materials 12 (4) 651 (2019)
https://doi.org/10.3390/ma12040651

Dielectric and flash DSC investigations on an epoxy based nanocomposite system with MgAl layered double hydroxide as nanofiller

Paulina Szymoniak, Zhi Li, De-Yi Wang and Andreas Schönhals
Thermochimica Acta 677 151 (2019)
https://doi.org/10.1016/j.tca.2019.01.010

Recent Advances in Cross-linked Polyethylene-based Nanocomposites for High Voltage Engineering Applications: A Critical Review

Jince Thomas, Blessy Joseph, Josmin. P. Jose, et al.
Industrial & Engineering Chemistry Research 58 (46) 20863 (2019)
https://doi.org/10.1021/acs.iecr.9b02172

Improvement in impact resistance performance of glass/epoxy composite through carbon nanotubes and silica nanoparticles

Zahra Naghizadeh, Mehdi Faezipour, Mohammad Hossein Pol, Gholam Hossein Liaghat and Ali Abdolkhani
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232 (9) 785 (2018)
https://doi.org/10.1177/1464420716649403

Morphological, structural, and thermophysical properties of zirconium dioxide–epoxy nanocomposites

Sudipta Halder, MS Goyat and PK Ghosh
High Performance Polymers 28 (6) 697 (2016)
https://doi.org/10.1177/0954008315595275

Hybrid nanostructured coatings for corrosion protection of base metals: a sustainability perspective

Robert V Dennis, Vikas Patil, Justin L Andrews, et al.
Materials Research Express 2 (3) 032001 (2015)
https://doi.org/10.1088/2053-1591/2/3/032001

Optimization of mechanical and thermo-mechanical properties of epoxy and E-glass/epoxy composites using NH2-MWCNTs, acetone solvent and combined dispersion methods

S. Zainuddin, A. Fahim, T. Arifin, et al.
Composite Structures 110 39 (2014)
https://doi.org/10.1016/j.compstruct.2013.11.010

Low-velocity impact behavior of CNF-filled glass-reinforced polyester composites

Muhammad E Hossain, Mohammad K Hossain, Mahesh Hosur and Shaik Jeelani
Journal of Composite Materials 48 (7) 879 (2014)
https://doi.org/10.1177/0021998313480194

Experimental study on the mechanical behavior of carbon/epoxy composites with a carbon nanofiber-modified matrix

Yuanxin Zhou, Shaik Jeelani and Thomas Lacy
Journal of Composite Materials 48 (29) 3659 (2014)
https://doi.org/10.1177/0021998313512348

Dielectric, mechanical, and thermal properties of bamboo–polylactic acid bionanocomposites

V Kumar, Naresh Kr Sharma and Rakesh Kumar
Journal of Reinforced Plastics and Composites 32 (1) 42 (2013)
https://doi.org/10.1177/0731684412461290

Biodegradable polyester nanocomposites: Phase miscibility and properties

Vikas Mittal and Khalid Al Zaabi
Journal of Applied Polymer Science 130 (1) 516 (2013)
https://doi.org/10.1002/app.39206

Effects of amino-functionalized MWCNTs on ballistic impact performance of E-glass/epoxy composites using a spherical projectile

Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, et al.
International Journal of Impact Engineering 57 108 (2013)
https://doi.org/10.1016/j.ijimpeng.2013.01.011

Friction and Wear of Polymer Composites Filled by Nano-Particles: A Review

Ayman A. Aly, El-Shafei B. Zeidan, AbdAllah A. Alshennawy, Aly A. El-Masry and Wahid A. Wasel
World Journal of Nano Science and Engineering 02 (01) 32 (2012)
https://doi.org/10.4236/wjnse.2012.21006

Thermo-mechanical behavior of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized multi-walled carbon nanotubes

Muhammad M. Rahman, Mahesh Hosur, Adriane G. Ludwick, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and Shaik Jeelani
Polymer Testing 31 (6) 777 (2012)
https://doi.org/10.1016/j.polymertesting.2012.05.006

Calcium carbonate (CaCO3) nanoparticle filled polypropylene: Effect of particle surface treatment on mechanical, thermal, and morphological performance of composites

Manish Kamal, C. S. Sharma, Pradeep Upadhyaya, Vishal Verma, K. N. Pandey, Vijai Kumar and D. D. Agrawal
Journal of Applied Polymer Science 124 (4) 2649 (2012)
https://doi.org/10.1002/app.35319

Enhancement in Mechanical Properties of Polystyrene Filled with Carbon Nano-Particulates (CNP<sub>S</sub>)

Ayman A. Aly, Moustafa M. Mahmoud and Adel A. Omar
World Journal of Nano Science and Engineering 02 (02) 103 (2012)
https://doi.org/10.4236/wjnse.2012.22013

Dielectric and mechanical properties of alkali- and silane-treated bamboo-epoxy nanocomposites

V Kumar and Rakesh Kumar
Journal of Composite Materials 46 (24) 3089 (2012)
https://doi.org/10.1177/0021998311435831

Improved mechanical and thermal properties of bamboo–epoxy nanocomposites

V. Kumar and Rakesh Kumar
Polymer Composites 33 (3) 362 (2012)
https://doi.org/10.1002/pc.22155

Mechanical characterization of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized MWCNTs

Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Kailash C. Jajam, Hareesh V. Tippur and Shaik Jeelani
Polymer Testing 31 (8) 1083 (2012)
https://doi.org/10.1016/j.polymertesting.2012.08.010

Improvements in mechanical and thermo-mechanical properties of e-glass/epoxy composites using amino functionalized MWCNTs

M.M. Rahman, S. Zainuddin, M.V. Hosur, et al.
Composite Structures 94 (8) 2397 (2012)
https://doi.org/10.1016/j.compstruct.2012.03.014

Preparation and Characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A Review

Gregory R. Guillen, Yinjin Pan, Minghua Li and Eric M. V. Hoek
Industrial & Engineering Chemistry Research 50 (7) 3798 (2011)
https://doi.org/10.1021/ie101928r

Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites

Prabhat Agnihotri, Sumit Basu and K.K. Kar
Carbon 49 (9) 3098 (2011)
https://doi.org/10.1016/j.carbon.2011.03.032

Improvement of Tensile and Flexural Properties in Epoxy/Clay Nanocomposites Reinforced with Weave Glass Fiber Reel

M. Ashok Kumar, K. Hemachandra Reddy, Y. V. Mohana Reddy, G. Ramachandra Reddy and S. Venkata Naidu
International Journal of Polymeric Materials 59 (11) 854 (2010)
https://doi.org/10.1080/00914037.2010.504144

Enhancing Fatigue Performance of Sandwich Composites with Nanophased Core

S. Zainuddin, H. Mahfuz, S. Jeelani and Gaurav Mago
Journal of Nanomaterials 2010 (1) (2010)
https://doi.org/10.1155/2010/712731

Study on Mechanical, Thermal and Electrical Characterizations of Nano-SiC/Epoxy Composites

Tianle Zhou, Xin Wang, Mingyuan Gu and Dangsheng Xiong
Polymer Journal 41 (1) 51 (2009)
https://doi.org/10.1295/polymj.PJ2008173

Reinforcement of SC-15 epoxy with CNT/CNF under high magnetic field: an investigation of mechanical and thermal response

Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, et al.
Journal of Materials Science 44 (4) 1113 (2009)
https://doi.org/10.1007/s10853-008-3161-5

Development of photo micro-graph method to characterize dispersion of CNT in epoxy

Yuanxin Zhou, M.I. Jeelani and Shaik Jeelani
Materials Science and Engineering: A 506 (1-2) 39 (2009)
https://doi.org/10.1016/j.msea.2008.12.044

Effect of polyvinyl alcohol matrices on the structural and spectroscopic studies of CdSe nanoparticles

R. Seoudi, S. Abd El Mongy and A.A. Shabaka
Physica B: Condensed Matter 403 (10-11) 1781 (2008)
https://doi.org/10.1016/j.physb.2007.10.108

Effect of Clay Dispersion on Mechanical, Thermal and Vibration Properties of Glass Fiber-Reinforced Vinyl Ester Composites

J. Chandradass, M. Ramesh Kumar and R. Velmurugan
Journal of Reinforced Plastics and Composites 27 (15) 1585 (2008)
https://doi.org/10.1177/0731684407081368

Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers

Yuanxin Zhou, Farhana Pervin, Shaik Jeelani and P.K. Mallick
Journal of Materials Processing Technology 198 (1-3) 445 (2008)
https://doi.org/10.1016/j.jmatprotec.2007.07.028

Low-Velocity Impact Response and Ultrasonic NDE of Woven Carbon/ Epoxy—Nanoclay Nanocomposites

Mahesh V. Hosur, Farhan Chowdhury and Shaik Jeelani
Journal of Composite Materials 41 (18) 2195 (2007)
https://doi.org/10.1177/0021998307074146

The effect of silica size on the friction and wear behaviors of polyimide/silica hybrids by sol–gel processing

Shi-Quan Lai, Tong-Sheng Li, Fan-Dong Wang, Xu-Jun Li and Li Yue
Wear 262 (9-10) 1048 (2007)
https://doi.org/10.1016/j.wear.2006.10.007

Enhancement of strength and stiffness of epoxy-based composites using nanoparticle infusion and high magnetic fields

Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, et al.
Materials Letters 61 (11-12) 2535 (2007)
https://doi.org/10.1016/j.matlet.2006.09.065

The effect of silica (SiO2) nanoparticles and ammonia/ethylene plasma treatment on the interfacial and mechanical properties of carbon-fiber-reinforced epoxy composites

Connie Lew, Farhan Chowdhury, Mahesh V. Hosur and Anil N. Netravali
Journal of Adhesion Science and Technology 21 (14) 1407 (2007)
https://doi.org/10.1163/156856107782313593

Nano‐composite Fibers Based on Poly(p‐benzamide)‐Montmorillonite

Enrico Marsano, Francesco Azzurri and Paola Corsini
Macromolecular Symposia 234 (1) 33 (2006)
https://doi.org/10.1002/masy.200650206

Intercalation and Exfoliation: A Review on Morphology of Polymer Nanocomposites Reinforced by Inorganic Layer Structures

J. Liu, W.-J. Boo, A. Clearfield and H.-J. Sue
Materials and Manufacturing Processes 21 (2) 143 (2006)
https://doi.org/10.1080/AMP-200068646

Effect of acrylic polymer and nanocomposite with nano-SiO2 on thermal degradation and fire resistance of APP–DPER–MEL coating

Zhenyu Wang, Enhou Han and Wei Ke
Polymer Degradation and Stability 91 (9) 1937 (2006)
https://doi.org/10.1016/j.polymdegradstab.2006.03.001

Thermal, spectral and AFM studies of calcium silicate hydrate-polymer nanocomposite material

S. C. Mojumdar, L. Raki, N. Mathis, K. Schimdt and S. Lang
Journal of Thermal Analysis and Calorimetry 85 (1) 119 (2006)
https://doi.org/10.1007/s10973-005-7354-8

Preparation, thermal, spectral and microscopic studies of calcium silicate hydrate–poly(acrylic acid) nanocomposite materials

S. C. Mojumdar and L. Raki
Journal of Thermal Analysis and Calorimetry 85 (1) 99 (2006)
https://doi.org/10.1007/s10973-005-7353-9

The friction and wear properties of polytetrafluoroethylene filled with ultrafine diamond

Shi-Quan Lai, Li Yue, Tong-Sheng Li and Zhi-Meng Hu
Wear 260 (4-5) 462 (2006)
https://doi.org/10.1016/j.wear.2005.03.010

The tribological properties of PTFE filled with thermally treated nano-attapulgite

Shi-Quan Lai, Tong-Sheng Li, Xu-Jun Liu, Ren-Guo Lv and Li Yue
Tribology International 39 (6) 541 (2006)
https://doi.org/10.1016/j.triboint.2005.03.016

Synthesis, thermal and structural characterization of nanocomposites for potential applications in construction

S. C. Mojumdar and L. Raki
Journal of Thermal Analysis and Calorimetry 86 (3) 651 (2006)
https://doi.org/10.1007/s10973-006-7720-1

An Investigation of Friction and Wear Behaviors of Polyimide/Attapulgite Hybrid Materials

Shi‐Quan Lai, Li Yue, Tong‐Sheng Li, Xu‐Jun Liu and Ren‐Guo Lv
Macromolecular Materials and Engineering 290 (3) 195 (2005)
https://doi.org/10.1002/mame.200400336

Sandwich Structures 7: Advancing with Sandwich Structures and Materials

Hassan Mahfuz, Shaik Zainuddin, Mohammed F. Uddin, Vijaya K. Rangari and Shaik Jeelani
Sandwich Structures 7: Advancing with Sandwich Structures and Materials 183 (2005)
https://doi.org/10.1007/1-4020-3848-8_18

Fabrication and mechanical characterization of carbon/SiC-epoxy nanocomposites

Nathaniel Chisholm, Hassan Mahfuz, Vijaya K. Rangari, Adnan Ashfaq and Shaik Jeelani
Composite Structures 67 (1) 115 (2005)
https://doi.org/10.1016/j.compstruct.2004.01.010

Fabrication, synthesis and mechanical characterization of nanoparticles infused polyurethane foams

Hassan Mahfuz, Vijaya K Rangari, Mohammad S Islam and Shaik Jeelani
Composites Part A: Applied Science and Manufacturing 35 (4) 453 (2004)
https://doi.org/10.1016/j.compositesa.2003.10.009

Polymers with palladium nanoparticles as active membrane materials

J. Yu, R. Y. F. Liu, B. Poon, S. Nazarenko, T. Koloski, T. Vargo, A. Hiltner and E. Baer
Journal of Applied Polymer Science 92 (2) 749 (2004)
https://doi.org/10.1002/app.20013

A Study on the Friction and Wear Behavior of PTFE Filled with Acid Treated Nano‐Attapulgite

Shi‐Quan Lai, Tong‐Sheng Li, Xu‐Jun Liu and Ren‐Guo Lv
Macromolecular Materials and Engineering 289 (10) 916 (2004)
https://doi.org/10.1002/mame.200400140

Graft polymerization onto inorganic nanoparticles and its effect on tribological performance improvement of polymer composites

Min Zhi Rong, Ming Qiu Zhang, Guang Shi, et al.
Tribology International 36 (9) 697 (2003)
https://doi.org/10.1016/S0301-679X(03)00029-X

Hybrid nylon-6/silica nanocomposites with improved mechanical properties

Monserrat García, Werner E. van Zyl and Henk Verweij
MRS Proceedings 740 (2002)
https://doi.org/10.1557/PROC-740-I1.9

Mechanical properties of silica–(meth)acrylate hybrid coatings on polycarbonate substrate

Victor A Soloukhin, Willem Posthumus, José C.M Brokken-Zijp, Joachim Loos and Gijsbertus de With
Polymer 43 (23) 6169 (2002)
https://doi.org/10.1016/S0032-3861(02)00542-6

Effect of particle surface treatment on the tribological performance of epoxy based nanocomposites

Ming Qiu Zhang, Min Zhi Rong, Shu Li Yu, Bernd Wetzel and Klaus Friedrich
Wear 253 (9-10) 1086 (2002)
https://doi.org/10.1016/S0043-1648(02)00252-1

Tensile performance improvement of low nanoparticles filled-polypropylene composites

Chun Lei Wu, Ming Qiu Zhang, Min Zhi Rong and Klaus Friedrich
Composites Science and Technology 62 (10-11) 1327 (2002)
https://doi.org/10.1016/S0266-3538(02)00079-9

Nanoparticles by chemical synthesis, processing to materials and innovative applications

Helmut Schmidt
Applied Organometallic Chemistry 15 (5) 331 (2001)
https://doi.org/10.1002/aoc.169

Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials

Michael Alexandre and Philippe Dubois
Materials Science and Engineering: R: Reports 28 (1-2) 1 (2000)
https://doi.org/10.1016/S0927-796X(00)00012-7

The Sol-Gel Process as a Basic Technology for Nanoparticle-Dispersed Inorganic-Organic Composites

H. Schmidt, G. Jonschker, S. Goedicke and M. Mennig
Journal of Sol-Gel Science and Technology 19 (1-3) 39 (2000)
https://doi.org/10.1023/A:1008706003996