Introducing carbon constraint in the steel sector: ULCOS scenarios and economic modeling
Rev. Met. Paris, 106 9 (2009) 318-324
Published online: 2009-09-29
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Exergy analysis of a novel ironmaking process combining coal gasification with the smelting reduction of iron ore
Yuan Zhao, Tao Wang, Binxuan Zhou, Chunyuan Ma and Yong DongFuel 372 132261 (2024)
https://doi.org/10.1016/j.fuel.2024.132261
In-situ iron oxide particle size and shape evolution during the dissolution in oxalic acid
M. Lausch, P. Brockmann, F. Schmitt, B.J.M. Etzold and J. HussongChemical Engineering Science 289 119864 (2024)
https://doi.org/10.1016/j.ces.2024.119864
Carbonized wood as a blast furnace pulverized coal substitute: A Techno-economic assessment
Richard Deutsch, Norbert Kienzl, Gernot Krammer, Hugo Stocker and Christoph StrasserEnergy 313 133955 (2024)
https://doi.org/10.1016/j.energy.2024.133955
Smelting Reduction of HIsarna Slag with Methane
Theint Theint Htet, Zhiming Yan, Johannes Hage, Koen Meijer and Zushu Listeel research international 95 (9) (2024)
https://doi.org/10.1002/srin.202400042
Advances in low carbon cokemaking – Influence of alternative raw materials and coal properties on coke quality
Brody Brooks, Salman Khoshk Rish, Hannah Lomas, Apsara Jayasekara and Arash TahmasebiJournal of Analytical and Applied Pyrolysis 173 106083 (2023)
https://doi.org/10.1016/j.jaap.2023.106083
Challenges and prospects of steel production using green hydrogen in Nepal
Chiranjeevi Mahat, Jahir Ahamad Jibran, Nischal Sharma and Bhola ThapaJournal of Physics: Conference Series 2629 (1) 012026 (2023)
https://doi.org/10.1088/1742-6596/2629/1/012026
Parametric optimization and wear analysis of AISI D2 steel components
Santosh Kumar, Harvinder Singh, Rakesh Kumar and Jasgurpreeet Singh ChohanMaterials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.01.247
Study on hydrogen smelting reduction behaviour in synthetic molten HIsarna slag
Theint Theint Htet, Zhiming Yan, Bharath Sampath Kumar, Johannes Hage, Koen Meijer and Zushu LiIronmaking & Steelmaking 50 (11) 1590 (2023)
https://doi.org/10.1080/03019233.2023.2204267
Making Iron Directly From Concentrate by Gaseous Reduction
H. Y. SohnMining, Metallurgy & Exploration 40 (5) 1427 (2023)
https://doi.org/10.1007/s42461-023-00766-6
Net-Zero transition in the steel sector: beyond the simple emphasis on hydrogen, did we miss anything?
Jean-Pierre BiratMatériaux & Techniques 111 (2) 201 (2023)
https://doi.org/10.1051/mattech/2023003
Technical Development and Prospect for Collaborative Reduction of Pollution and Carbon Emissions from Iron and Steel Industry in China
Tingyu Zhu, Xiaolong Liu, Xindong Wang and Hong HeEngineering 31 37 (2023)
https://doi.org/10.1016/j.eng.2023.02.014
Determining the Production and Transport Cost for H2 on a Global Scale
Jason Collis and Reinhard SchomäckerFrontiers in Energy Research 10 (2022)
https://doi.org/10.3389/fenrg.2022.909298
An Empirical Comparative Study of Renewable Biochar and Fossil Carbon as Carburizer in Steelmaking
Ryan Robinson, Liviu Brabie, Magnus Pettersson, Marko Amovic and Rolf LjunggrenISIJ International 62 (12) 2522 (2022)
https://doi.org/10.2355/isijinternational.ISIJINT-2020-135
Decarbonising Economies
Harriet Bulkeley, Johannes Stripple, Lars J. Nilsson, et al.Decarbonising Economies (2022)
https://doi.org/10.1017/9781108934039
Development of a Moving-Bed Ironmaking Process for Direct Gaseous Reduction of Iron Ore Concentrate
Hong Yong Sohn and Syamantak RoyMetals 12 (11) 1889 (2022)
https://doi.org/10.3390/met12111889
Techno-economic assessment of jet fuel production using the Fischer-Tropsch process from steel mill gas
Jason Collis, Karsten Duch and Reinhard SchomäckerFrontiers in Energy Research 10 (2022)
https://doi.org/10.3389/fenrg.2022.1049229
Deriving Economic Potential and GHG Emissions of Steel Mill Gas for Chemical Industry
Jason Collis, Till Strunge, Bernhard Steubing, Arno Zimmermann and Reinhard SchomäckerFrontiers in Energy Research 9 (2021)
https://doi.org/10.3389/fenrg.2021.642162
Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues
Jean-Pierre Birat, Fabrice Patisson and Olivier MirgauxMatériaux & Techniques 109 (3-4) 307 (2021)
https://doi.org/10.1051/mattech/2021023
Renewables‐based decarbonization and relocation of iron and steel making: A case study
Dolf Gielen, Deger Saygin, Emanuele Taibi and Jean‐Pierre BiratJournal of Industrial Ecology 24 (5) 1113 (2020)
https://doi.org/10.1111/jiec.12997
Numerical simulation of the gasification-reduction coupling process in the innovative multi-generation system
Yiru Yang, Dongyue Li, Lei Guo, Zhe Wang and Zhancheng GuoApplied Thermal Engineering 168 114899 (2020)
https://doi.org/10.1016/j.applthermaleng.2020.114899
Numerical Investigation into Gas-Particle Inter-Phase Combustion and Reduction in the Flash Ironmaking Process
Benjun Cheng, Jian Xiong, Mao Li, Yuan Feng, Wenyuan Hou and Hesong LiMetals 10 (6) 711 (2020)
https://doi.org/10.3390/met10060711
Influence of Parameters on the Pre-Reduction Process of Vanadium-Titanium Magnetite Carbon-Containing Composite Pellets in Rotary Kiln
Bo Wang, Xueyong Ding, Tianhua Ju, Xiaofei Zhang and Gongjin ChengMetals 11 (1) 45 (2020)
https://doi.org/10.3390/met11010045
Clean Ironmaking and Steelmaking Processes
Pasquale CavaliereClean Ironmaking and Steelmaking Processes 1 (2019)
https://doi.org/10.1007/978-3-030-21209-4_1
Potential transitions in the iron and steel industry in Sweden: Towards a hydrogen-based future?
Emrah Karakaya, Cali Nuur and Linda AssbringJournal of Cleaner Production 195 651 (2018)
https://doi.org/10.1016/j.jclepro.2018.05.142
Current status and potential of biomass utilization in ferrous metallurgical industry
Rufei Wei, Lingling Zhang, Daqiang Cang, et al.Renewable and Sustainable Energy Reviews 68 511 (2017)
https://doi.org/10.1016/j.rser.2016.10.013
Steel cleanliness and environmental metallurgy
Jean-Pierre BiratMetallurgical Research & Technology 113 (2) 201 (2016)
https://doi.org/10.1051/metal/2015050
Monitoring the environmental and energy impacts of electric arc furnace steelmaking
Valentina Colla, Filippo Cirilli, Bernd Kleimt, et al.Matériaux & Techniques 104 (1) 102 (2016)
https://doi.org/10.1051/mattech/2015062
Managing carbon-intensive materials in a decarbonizing world without a global price on carbon
Amandine Denis-Ryan, Chris Bataille and Frank JotzoClimate Policy 16 (sup1) S110 (2016)
https://doi.org/10.1080/14693062.2016.1176008
Process modelling and simulation of electric arc furnace steelmaking to allow prognostic evaluations of process environmental and energy impacts
Ismael Matino, Erika Alcamisi, Valentina Colla, Stefano Baragiola and Paolo MoniMatériaux & Techniques 104 (1) 104 (2016)
https://doi.org/10.1051/mattech/2016004
Iron Ore
J.G. Mathieson, M.A. Somerville, A. Deev and S. JahanshahiIron Ore 581 (2015)
https://doi.org/10.1016/B978-1-78242-156-6.00019-8
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
M. Abdul Quader, Shamsuddin Ahmed, Raja Ariffin Raja Ghazilla, Shameem Ahmed and Mahidzal DahariRenewable and Sustainable Energy Reviews 50 594 (2015)
https://doi.org/10.1016/j.rser.2015.05.026
The impact of climate targets on future steel production – an analysis based on a global energy system model
Johannes Morfeldt, Wouter Nijs and Semida SilveiraJournal of Cleaner Production 103 469 (2015)
https://doi.org/10.1016/j.jclepro.2014.04.045
Cooperation and competition among structural materials
J.-P. Birat, M. Chiappini, C. Ryman and J. RiesbeckRevue de Métallurgie 110 (1) 95 (2013)
https://doi.org/10.1051/metal/2013057
Reducing Net CO2 Emissions Using Charcoal as a Blast Furnace Tuyere Injectant
John G. Mathieson, Harold Rogers, Michael A. Somerville and Sharif JahanshahiISIJ International 52 (8) 1489 (2012)
https://doi.org/10.2355/isijinternational.52.1489
Sustainability footprint of steelmaking byproducts
J P BiratIronmaking & Steelmaking 39 (4) 270 (2012)
https://doi.org/10.1179/1743281211Y.0000000054
Developments and Innovation in Carbon Dioxide (CO2) Capture and Storage Technology
J-P. BiratDevelopments and Innovation in Carbon Dioxide (CO2) Capture and Storage Technology 492 (2010)
https://doi.org/10.1533/9781845699574.5.492