Lightweight materials for the automotive: environmental impact analysis of the use of composites
Rev. Met. Paris, 106 12 (2009) 541-546
Published online: 2009-12-08
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
High-strength magnesium composites reinforced with Sn–Ca and GNs–Y₂O₃ for automotive use
Hossam M. Yehia, Walid M. Daoush, Omayma A. El-kady, Taher S. Abdelhamed and Omnia M. M. IbrahimJournal of Composite Materials (2025)
https://doi.org/10.1177/00219983251403125
Design and optimisation of a tipping silo semi-trailer by using innovative materials
Luigi Solazzi and Nicola DanziComposites Part C: Open Access 14 100469 (2024)
https://doi.org/10.1016/j.jcomc.2024.100469
Jib crane lightweighting through composite material and prestressing technique
Luigi Solazzi and Nicola DanziComposite Structures 343 118283 (2024)
https://doi.org/10.1016/j.compstruct.2024.118283
Static and dynamic study of the industrial vehicle transmission adopting composite materials
Luigi Solazzi, Davide Bertoli and Lorenzo GhidiniComposite Structures 316 117042 (2023)
https://doi.org/10.1016/j.compstruct.2023.117042
Recyclable thermally conductive poly(butylene adipate‐co‐terephthalate) composites prepared via forced infiltration
Chenglin Li, Yi Han, Qingyuan Du, Daming Wu, Jingyao Sun, Zhao Wang and Liqun ZhangSusMat 3 (3) 345 (2023)
https://doi.org/10.1002/sus2.128
Lightweight Materials in Electric Vehicles
Xianyan Zhou, Jun Jiang, Zhili Hu and Lin HuaInternational Journal of Automotive Manufacturing and Materials 3 (2022)
https://doi.org/10.53941/ijamm0101003
Reliability design of a pressure vessel made of composite materials
Luigi Solazzi and Marco VaccariComposite Structures 279 114726 (2022)
https://doi.org/10.1016/j.compstruct.2021.114726
Feasibility study of a jib crane made of composite materials considering deterministic and probabilistic approach.
Luigi Solazzi and Marco VaccariComposites Part C: Open Access 100323 (2022)
https://doi.org/10.1016/j.jcomc.2022.100323
Reliability evaluation of critical local buckling load on the thin walled cylindrical shell made of composite material
Luigi SolazziComposite Structures 284 115163 (2022)
https://doi.org/10.1016/j.compstruct.2021.115163
The designing of degradable unsaturated polyester based on selective cleavage activated hydrolysis and its application in recyclable carbon fiber composites
Yue Yao, Feng Zhao, Baolong Wang, Zhen Hu and Yudong HuangComposites Science and Technology 229 109692 (2022)
https://doi.org/10.1016/j.compscitech.2022.109692
Characterizing the Changes in Material Use due to Vehicle Electrification
Karan Bhuwalka, Frank R. Field, Robert D. De Kleine, Hyung Chul Kim, Timothy J. Wallington and Randolph E. KirchainEnvironmental Science & Technology 55 (14) 10097 (2021)
https://doi.org/10.1021/acs.est.1c00970
Design and experimental tests on hydraulic actuator made of composite material
Luigi SolazziComposite Structures 232 111544 (2020)
https://doi.org/10.1016/j.compstruct.2019.111544
Comparing the incomparable? A review of methodical aspects in the sustainability assessment of wood in vehicles
Claudia Mair-Bauernfeind, Martina Zimek, Miriam Lettner, Franziska Hesser, Rupert J. Baumgartner and Tobias SternThe International Journal of Life Cycle Assessment 25 (11) 2217 (2020)
https://doi.org/10.1007/s11367-020-01800-1
Excavator arms: Numerical, experimental and new concept design
Luigi Solazzi, Ahmad Assi and Federico CeresoliComposite Structures 217 60 (2019)
https://doi.org/10.1016/j.compstruct.2019.02.096
Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: a review
Tushar Kanti Das, Prosenjit Ghosh and Narayan Ch. DasAdvanced Composites and Hybrid Materials 2 (2) 214 (2019)
https://doi.org/10.1007/s42114-018-0072-z
Carbon Composites
Carbon Composites 563 (2017)https://doi.org/10.1016/B978-0-12-804459-9.00010-5
Carbon felt and carbon fiber - A techno-economic assessment of felt electrodes for redox flow battery applications
Christine Minke, Ulrich Kunz and Thomas TurekJournal of Power Sources 342 116 (2017)
https://doi.org/10.1016/j.jpowsour.2016.12.039
Waste Management and Valorization
Lindsay Miller, Katie Soulliere, Susan Sawyer-Beaulieu, Simon Tseng and Edwin TamWaste Management and Valorization 237 (2016)
https://doi.org/10.1201/b19941-15
Challenges and Alternatives to Plastics Recycling in the Automotive Sector
Lindsay Miller, Katie Soulliere, Susan Sawyer-Beaulieu, Simon Tseng and Edwin TamMaterials 7 (8) 5883 (2014)
https://doi.org/10.3390/ma7085883
Evaluating the Potential for Secondary Mass Savings in Vehicle Lightweighting
Elisa Alonso, Theresa M. Lee, Catarina Bjelkengren, Richard Roth and Randolph E. KirchainEnvironmental Science & Technology 46 (5) 2893 (2012)
https://doi.org/10.1021/es202938m
Do fiber-reinforced polymer composites provide environmentally benign alternatives? A life-cycle-assessment-based study
Joost R. Duflou, Yelin Deng, Karel Van Acker and Wim DewulfMRS Bulletin 37 (04) 374 (2012)
https://doi.org/10.1557/mrs.2012.33