Predicting the mechanical properties of a quenched and tempered steel thanks to a “tempering parameter”
Rev. Metall., 107 7-8 (2010) 293-302
Published online: 2011-01-18
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Research progress on thermal aging of reactor pressure vessel steel
Junkang Gao, Jun Li, Junwan Li, Shaohong Li and Zhimin LiMaterials Science and Technology 41 (7) 459 (2025)
https://doi.org/10.1177/02670836241259859
Laser surface hardening: A simulative study of tempering mechanisms on hardness and residual stress
Philipp Schüßler, James Damon, Fabian Mühl, Stefan Dietrich and Volker SchulzeComputational Materials Science 221 112079 (2023)
https://doi.org/10.1016/j.commatsci.2023.112079
1 (2022)
https://doi.org/10.1109/ICECET55527.2022.9872890
Analytical modeling and experimental verification of the depth of subsurface heat-affected layer in gear profile grinding
Yi Jun, Yi Tao, Guo Zongfu, Gong Zhifeng and Chen BingThe International Journal of Advanced Manufacturing Technology 121 (5-6) 4141 (2022)
https://doi.org/10.1007/s00170-022-09553-x
Evaluation of Hardness and Residual Stress Changes of AISI 4140 Steel Due to Thermal Load during Surface Grinding
Ewald Kohls, Carsten Heinzel and Marco EichJournal of Manufacturing and Materials Processing 5 (3) 73 (2021)
https://doi.org/10.3390/jmmp5030073
Prediction of Mechanical Properties of Steel Tubes Using a Machine Learning Approach
Marcelo V. Carneiro, Turíbio T. Salis, Gustavo M. Almeida and Antonio P. BragaJournal of Materials Engineering and Performance 30 (1) 434 (2021)
https://doi.org/10.1007/s11665-020-05345-0
Hardness Prediction in Quenched and Tempered Nodular Cast Iron Using the Hollomon-Jaffe Parameter
Fidel Salas Vicente, Javier Carcel Carrasco, Raquel Fernández Antoni, Juan Carlos Ferrero Taberner and Manuel Pascual GuillamónMetals 11 (2) 297 (2021)
https://doi.org/10.3390/met11020297
Limiting Retained Austenite Decomposition in Quenched and Tempered Steels: Influences of Rapid Tempering and Silicon
Virginia Katherine Euser, Don Lee Williamson, Amy Jean Clarke and John Gordon SpeerISIJ International 60 (12) 2990 (2020)
https://doi.org/10.2355/isijinternational.ISIJINT-2020-263
Experimental investigation and finite-element modeling of the short-time induction quench-and-temper process of AISI 4140
D. Kaiser, J. Damon, F. Mühl, et al.Journal of Materials Processing Technology 279 116485 (2020)
https://doi.org/10.1016/j.jmatprotec.2019.116485
Microstructural Stability and Softening Resistance of a Novel Hot-Work Die Steel
Ningyu Du, Hongwei Liu, Paixian Fu, et al.Crystals 10 (4) 238 (2020)
https://doi.org/10.3390/cryst10040238
Prediction of Mechanical Properties of Seamless Steel Tubes Using Artificial Neural Networks
Ramon Santos Correa, Patricia Teixeira Sampaio, Rafael Utsch Braga, et al.International Journal of Computational Intelligence and Applications 19 (04) (2020)
https://doi.org/10.1142/S1469026820500285
Investigation of the precipitation kinetics and microstructure evolution of martensitic AISI 4140 steel during tempering with high heating rates
Daniel Kaiser, Bernhard de Graaff, Stefan Dietrich, et al.Metallurgical Research & Technology 115 (4) 404 (2018)
https://doi.org/10.1051/metal/2018026
Precipitation-Induced Changes in Microstrain and Its Relation with Hardness and Tempering Parameter in 17-4 PH Stainless Steel
S. Mahadevan, R. Manojkumar, T. Jayakumar, C. R. Das and B. P. C. RaoMetallurgical and Materials Transactions A 47 (6) 3109 (2016)
https://doi.org/10.1007/s11661-016-3440-8
The tempering parameter for evaluating softening of hot and warm forging die steels
E. Virtanen, C.J. Van Tyne, B.S. Levy and G. BradaJournal of Materials Processing Technology 213 (8) 1364 (2013)
https://doi.org/10.1016/j.jmatprotec.2013.03.003