A two-dimensional axially-symmetric model of keyhole and melt pool dynamics during spot laser welding
Rev. Metall., 110 2 (2013) 165-173
Published online: 2013-04-18
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Adaptation of energy source parameters to improve mesoscale thermal simulation of laser powder bed fusion without explicit fluid dynamics
Simon Girnth, Christian Wacker, Nils Waldt, Günter Klawitter and Klaus DröderProgress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-025-01109-1
Validation of Damage Analysis Techniques for Non-Metallic Materials Due to Laser Irradiation
Sangyong Jo, Hyoungjin Lee and Youngho KimJournal of the Korea Institute of Military Science and Technology 28 (1) 100 (2025)
https://doi.org/10.9766/KIMST.2025.28.1.100
Thermal design of operating parameter for reliable AlSi7Mg selective laser melting
Namkyu Lee and Hyung Hee ChoJournal of Materials Research and Technology 30 4405 (2024)
https://doi.org/10.1016/j.jmrt.2024.04.158
Numerical simulations and mathematical models in laser welding: a review based on physics and heat source models
M. Jiménez-Xamán, M. Hernández-Hernández, Rasikh Tariq, Saulo Landa-Damas, M. Rodríguez-Vázquez, A. Aranda-Arizmendi and P. Cruz-AlcantarFrontiers in Mechanical Engineering 10 (2024)
https://doi.org/10.3389/fmech.2024.1325623
Numerical simulation and experimental analysis on nanosecond laser ablation of titanium alloy
Wen Zhao, Zhou Yu and Jun HuJournal of Manufacturing Processes 99 138 (2023)
https://doi.org/10.1016/j.jmapro.2023.05.037
Effects of laser remelting on microstructure and shear properties of bonding interface in hybrid metal additive manufacturing process
Fei Xue, Xin Cui, Longfei Zheng, Mian Li and Xuewei FangThe International Journal of Advanced Manufacturing Technology 119 (1-2) 1267 (2022)
https://doi.org/10.1007/s00170-021-08234-5
Quantification of porosity and microstructure and their effect on quasi-static and dynamic behavior of additively manufactured Inconel 718
Behzad Bahrami Babamiri, Joseph Indeck, Gabriel Demeneghi, Jefferson Cuadra and Kavan HazeliAdditive Manufacturing 34 101380 (2020)
https://doi.org/10.1016/j.addma.2020.101380
In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing
Qilin Guo, Cang Zhao, Minglei Qu, et al.Additive Manufacturing 31 100939 (2020)
https://doi.org/10.1016/j.addma.2019.100939
Corrosion Susceptibility and Functionally Graded Properties of Ti-35Nb-4Sn Alloy Processed by Laser Remelting
Juliane Ribeiro da Cruz, Milton Sérgio Fernandes de Lima and Rodnei BertazzoliMaterials Research 23 (1) (2020)
https://doi.org/10.1590/1980-5373-mr-2019-0399
On the evolution of microstructure and defect control in 316L SS components fabricated via directed energy deposition
B. Zheng, J.C. Haley, N. Yang, et al.Materials Science and Engineering: A 764 138243 (2019)
https://doi.org/10.1016/j.msea.2019.138243
Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models
Fritz Lange, Antoni Artinov, Marcel Bachmann, Michael Rethmeier and Kai HilgenbergProcedia CIRP 74 679 (2018)
https://doi.org/10.1016/j.procir.2018.08.044
Guidelines in the experimental validation of a 3D heat and fluid flow model of keyhole laser welding
Mickael Courtois, Muriel Carin, Philippe Le Masson, Sadok Gaied and Mikhaël BalabaneJournal of Physics D: Applied Physics 49 (15) 155503 (2016)
https://doi.org/10.1088/0022-3727/49/15/155503
353 (2015)
https://doi.org/10.2351/1.5063185
The Effects of Entrainment on Pore Shape in Keyhole Mode Welding
P. S. Wei and T. C. ChaoJournal of Heat Transfer 137 (8) (2015)
https://doi.org/10.1115/1.4029039
Keyhole collapse during high intensity beam drilling
P.S. Wei, J.H. Wu, T.C. Chao and L.J. ChenInternational Journal of Heat and Mass Transfer 79 300 (2014)
https://doi.org/10.1016/j.ijheatmasstransfer.2014.07.070
Prediction of pore size in high power density beam welding
P.S. Wei and T.C. ChaoInternational Journal of Heat and Mass Transfer 79 223 (2014)
https://doi.org/10.1016/j.ijheatmasstransfer.2014.07.091