Characteristics of subsurface inclusions in deep-drawing steel slabs at high casting speed
Metall. Res. Technol., 112 6 (2015) 608
Published online: 2015-12-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Investigation on Inclusion Removal Behavior via Feeding a Novel Fe-Si + (CaCO3 + CaO) Composite Powder Cored Wire
X. F. Wang, Fei Ding, Y. J. Zhang, W Kang and H. LiJournal of Materials Engineering and Performance (2025)
https://doi.org/10.1007/s11665-025-12057-w
Numerical Simulation of the Flow Field and Inclusion Entrapment in Ultrawide Slab Continuous Casting Mold Combined with High‐Temperature Velocity Quantitative Measurement
Zhuo Chen, Jian Yang, Kefeng Wang, Guorong Zhu, Xianjin Sun, Tongsheng Zhang, Yuhang Zhao and Yuntong Listeel research international 96 (11) 141 (2025)
https://doi.org/10.1002/srin.202401040
Industrial Investigation on Inclusions and Solidification Structure of Steel Continuous Casting Slabs Under Mold Electromagnetic Stirring
Fu Zheng, Yadong Wang, Wei Chen and Lifeng ZhangMetallurgical and Materials Transactions B 55 (5) 3222 (2024)
https://doi.org/10.1007/s11663-024-03171-6
Preparation of Continuously Cast Highly-Alloyed Steel Slab Billets
V. V. Stulov, A. M. Barynin and E. V. SterlikovMetallurgist 66 (11-12) 1372 (2023)
https://doi.org/10.1007/s11015-023-01452-0
Experimental Mold for Producing Concast Billets from High-Alloyed Steels and Alloys. Part 1. Preliminary Thermal Testing and Design of the Mold
V. V. Stulov and O. M. ShafievMetallurgist 66 (9-10) 1192 (2023)
https://doi.org/10.1007/s11015-023-01432-4
Finite Element Analysis on Inclusion Migration during Hot-Rolling Process of Ultralow Carbon Steel
Yanbin Yin and Jiongming ZhangProcesses 11 (3) 934 (2023)
https://doi.org/10.3390/pr11030934
Distribution Characteristics of Inclusions in the Surface Layer of Interstitial Free (IF) Steel Slab
Guihua Chang, Hong Li, Xiaofeng Wang, Fei Ding, Siyu Yuan, Jianchao Ma, Yong Tian and Xu WangJOM 75 (7) 2693 (2023)
https://doi.org/10.1007/s11837-023-05841-3
Analysis of Cold Forming Surface Crack of High-Strength Low-Alloyed Steel Produced by TSCR Process
Neel Kant, Aditya Sarkar, Bhushan Rakshe and Sujoy S. HazraJournal of Failure Analysis and Prevention 22 (6) 2214 (2022)
https://doi.org/10.1007/s11668-022-01503-9
Effects of operating parameters on the flow field in slab continuous casting molds with narrow widths
Tao Zhang, Jian Yang, Gang-jun Xu, et al.International Journal of Minerals, Metallurgy and Materials 28 (2) 238 (2021)
https://doi.org/10.1007/s12613-020-1988-1
Large Eddy Simulation of Transient Flow, Particle Transport, and Entrapment in Slab Mold with Double‐Ruler Electromagnetic Braking
Yanbin Yin, Jiongming Zhang, Haitao Ma and Qinghai Zhousteel research international 92 (5) (2021)
https://doi.org/10.1002/srin.202000582
Numerical analyses of damage behavior of wire with inclusion in multipass drawing process
Ao Ma, Jiaxing Cheng, Dasheng Wei, Feng Fang and Zhaoxia LiFatigue & Fracture of Engineering Materials & Structures 44 (9) 2538 (2021)
https://doi.org/10.1111/ffe.13533
Three-Dimensional Distributions of Large-Sized Inclusions in the Surface Layer of IF Steel Slabs
Xiaoxuan Deng, Qiangqiang Wang, Chenxi Ji, et al.Metallurgical and Materials Transactions B 51 (1) 318 (2020)
https://doi.org/10.1007/s11663-019-01751-5
Influence of water flow rate in mold on hooks and inclusions at the subsurface of ultra low carbon Al-killed continuous casting slabs
Lifeng Zhang, Xubin Zhang, Ying Ren and Wen YangMetallurgical Research & Technology 116 (2) 215 (2019)
https://doi.org/10.1051/metal/2018065
Distribution of macro-inclusions in low carbon aluminium-killed steel slabs
Xiaoxuan Deng, Chenxi Ji, Wenliang Dong, et al.Ironmaking & Steelmaking 45 (7) 592 (2018)
https://doi.org/10.1080/03019233.2017.1305676
CFD Modeling and Simulation in Materials Processing 2018
Pengcheng Xiao, Jingyi Zhou, Liguang Zhu, Caijun Zhang and Yi LiuThe Minerals, Metals & Materials Series, CFD Modeling and Simulation in Materials Processing 2018 19 (2018)
https://doi.org/10.1007/978-3-319-72059-3_3