Upper bound solution of equal channel forward extrusion process as a new severe plastic deformation method
Metall. Res. Technol., 112 6 (2015) 609
Published online: 2015-12-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A Novel Hybrid Die Design for Enhanced Grain Refinement: Vortex Extrusion–Equal-Channel Angular Pressing (Vo-CAP)
Hüseyin Beytüt, Kerim Özbeyaz and Şemsettin TemizApplied Sciences 15 (1) 359 (2025)
https://doi.org/10.3390/app15010359
Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Processed through Constrained Groove Pressing at Different Deformations and Temperatures
Li YuJournal of Materials Engineering and Performance 34 (3) 1852 (2025)
https://doi.org/10.1007/s11665-023-09102-x
Analysis of Cold Composite Sheet Rolling Considering Anisotropic Effect and Position-Dependent Friction Model
Jiageng Liu, Jiang Wu, Qian Liu, et al.Metals 13 (2) 259 (2023)
https://doi.org/10.3390/met13020259
Correlation between stress state and crystal orientation distribution in alternating back extrusion of magnesium alloy
Ye Wang, Feng Li, Peng Da Huo, Chao Li and Xin Ran GuanMechanics of Materials 173 104416 (2022)
https://doi.org/10.1016/j.mechmat.2022.104416
Effects of ECAR process on the mechanical properties of explosively welded Al/Cu/Al
Sina Ghaffari, Suraya Tahir, Azmah Hanim Mohamed Ariff and M. I. S. IsmailAustralian Journal of Mechanical Engineering 20 (5) 1407 (2022)
https://doi.org/10.1080/14484846.2020.1804041
Modeling limit force capacities of high force to volume lead extrusion dampers
V. Vishnupriya, Geoffrey. W. Rodgers and J. Geoffrey ChaseFrontiers of Structural and Civil Engineering 15 (3) 609 (2021)
https://doi.org/10.1007/s11709-021-0724-x
Theoretical and Numerical Investigation of Required Torque in ECAP-Conform Process
Hasan Ghaforian Nosrati, Khalil Khalili and Mahdi GerdooeiMetallurgical and Materials Transactions B 51 (2) 519 (2020)
https://doi.org/10.1007/s11663-020-01797-w
Effect of Equal Channel Angular Rolling Process on the Fracture Mechanisms of Al-7057 and Al-5052 Alloys
M. Honarpisheh, S. Saki Entezami and S. AkhavanMetallography, Microstructure, and Analysis 8 (3) 336 (2019)
https://doi.org/10.1007/s13632-019-00540-5