Investigation of the effects of cold rolling on the mechanical properties of explosively-welded Al/St/Al multilayer sheet
Metall. Res. Technol., 113 1 (2016) 105
Published online: 2016-02-04
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
(2023)
https://doi.org/10.21203/rs.3.rs-2486767/v1
Improvement of mechanical properties of tri-metallic 7075Al/1060Al/304 SS composite via collaborative strengthening behavior
Taiqian Mo, Huaqiang Xiao, Bo Lin, et al.Materials Science and Engineering: A 857 144072 (2022)
https://doi.org/10.1016/j.msea.2022.144072
Effects of ECAR process on the mechanical properties of explosively welded Al/Cu/Al
Sina Ghaffari, Suraya Tahir, Azmah Hanim Mohamed Ariff and M. I. S. IsmailAustralian Journal of Mechanical Engineering 20 (5) 1407 (2022)
https://doi.org/10.1080/14484846.2020.1804041
Experimental and Numerical Investigation of Forming Limit Diagram of CP-Ti/St12 Bimetal in the Incremental Forming Process
H. Rezaei and M. HonarpishehStrength of Materials 54 (4) 681 (2022)
https://doi.org/10.1007/s11223-022-00446-8
A two steps Lagrangian–Eulerian numerical model for the simulation of explosive welding of three dissimilar materials joints
Davide Campanella, Gianluca Buffa and Livan FratiniCIRP Journal of Manufacturing Science and Technology 35 541 (2021)
https://doi.org/10.1016/j.cirpj.2021.08.010
Design and Modeling of Mechanical Systems - IV
Henia Arfa, Wifak Ben Abdelkader and Riadh BahloulLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems - IV 487 (2020)
https://doi.org/10.1007/978-3-030-27146-6_53
Investigation on Interface Morphology and Mechanical Properties of Three-Layer Laser Impact Welding of Cu/Al/Cu
Huixia Liu, Hao Jin, Meng Shao, Heng Tang and Xiao WangMetallurgical and Materials Transactions A 50 (3) 1273 (2019)
https://doi.org/10.1007/s11661-018-5074-5
TIG welding-brazing joints of aluminum-stainless steel with different thickness of base metals
Huan He, Wenqin Gou, Yan Jing, Sanbao Lin and Chunli YangMetallurgical Research & Technology 116 (4) 404 (2019)
https://doi.org/10.1051/metal/2018116
A novel material modeling technique in the single-point incremental forming assisted by the ultrasonic vibration of low carbon steel/commercially pure titanium bimetal sheet
M. R. Sakhtemanian, M. Honarpisheh and S. AminiThe International Journal of Advanced Manufacturing Technology 102 (1-4) 473 (2019)
https://doi.org/10.1007/s00170-018-3148-6
Residual stress measurement of single point incremental formed Al/Cu bimetal using incremental hole-drilling method
Mahnoush Alinaghian, Iman Alinaghian and Mohammad HonarpishehInternational Journal of Lightweight Materials and Manufacture 2 (2) 131 (2019)
https://doi.org/10.1016/j.ijlmm.2019.04.003
Process Parameters Optimization of the Explosive-Welded Al/Cu Bimetal in the Incremental Sheet Metal Forming Process
A. Gheysarian and M. HonarpishehIranian Journal of Science and Technology, Transactions of Mechanical Engineering 43 (S1) 945 (2019)
https://doi.org/10.1007/s40997-018-0205-6
Through-depth residual stress measurement of laser bent steel–titanium bimetal sheets
Mahdi Kotobi and Mohammad HonarpishehThe Journal of Strain Analysis for Engineering Design 53 (3) 130 (2018)
https://doi.org/10.1177/0309324717753212
Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology
M. Honarpisheh, M. Mohammadi Jobedar and I. AlinaghianThe International Journal of Advanced Manufacturing Technology 96 (9-12) 3069 (2018)
https://doi.org/10.1007/s00170-018-1812-5
Numerical and experimental study on incremental forming process of Al/Cu bimetals: influence of process parameters on the forming force, dimensional accuracy and thickness variations
Mohammad Honarpisheh, Morteza Keimasi and Iman AlinaghianJournal of Mechanics of Materials and Structures 13 (1) 35 (2018)
https://doi.org/10.2140/jomms.2018.13.35
Application countermeasures of the manufacturing processes of titanium-steel composite plates
Xuan Yang, Chang-gen Shi, Zhong-hang Fang and Md Nahid Hasan SabujMaterials Research Express 6 (2) 026519 (2018)
https://doi.org/10.1088/2053-1591/aaebf0
Numerical and experimental study on the layer arrangement in the incremental forming process of explosive-welded low-carbon steel/CP-titanium bimetal sheet
M. R. Sakhtemanian, M. Honarpisheh and S. AminiThe International Journal of Advanced Manufacturing Technology 95 (9-12) 3781 (2018)
https://doi.org/10.1007/s00170-017-1462-z
Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads
Dagmara Malgorzata Fronczek, Robert Chulist, Lidia Litynska-Dobrzynska, et al.Metallurgical and Materials Transactions A 48 (9) 4154 (2017)
https://doi.org/10.1007/s11661-017-4169-8