Characteristic and evolution of inclusions in Al-Killed titanium alloyed steel during air contact process
Metall. Res. Technol., 114 1 (2017) 110
Published online: 2016-11-18
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Prediction on Three-Dimensional Spatial Distribution of Inclusions in a Continuous Casting Start Slab
Fengchen Li, Wei Chen and Lifeng ZhangMetallurgical and Materials Transactions B 56 (2) 1830 (2025)
https://doi.org/10.1007/s11663-025-03443-9
Evolution Mechanism of Inclusions during the Reoxidation Process of Titanium-Stabilized AISI 321 Stainless Steel in Continuous Casting Tundish
Chao Pan and Xiaojun HuISIJ International 65 (12) 1868 (2025)
https://doi.org/10.2355/isijinternational.ISIJINT-2025-131
Numerical Simulation on Transient Flow, Heat Transfer, and Solidification during Slab Continuous Casting Start Process
Fengchen Li, Wei Chen, Guosen Zhu, Haibo Li and Lifeng Zhangsteel research international (2025)
https://doi.org/10.1002/srin.202500770
The influence of alloying elements segregation on heterogeneous nucleation of TiN on Al2O3 and its local corrosion resistance
Yanhui Hou, Zhi Ni and Guangqiang LiJournal of Materials Research and Technology 32 338 (2024)
https://doi.org/10.1016/j.jmrt.2024.07.140
Effect of ladle lining system refractories on the cleanliness of heavy-rail steel U75V
Zhijie Guo, Yanhui Sun, Hongyu Wang, Chao Zhuo and Huajie WuMetallurgical Research & Technology 120 (6) 612 (2023)
https://doi.org/10.1051/metal/2023076
Distribution Characteristics of Inclusions in the Surface Layer of Interstitial Free (IF) Steel Slab
Guihua Chang, Hong Li, Xiaofeng Wang, Fei Ding, Siyu Yuan, Jianchao Ma, Yong Tian and Xu WangJOM 75 (7) 2693 (2023)
https://doi.org/10.1007/s11837-023-05841-3
Characterization of 2D and 3D morphology of Al2O3 inclusion in hot rolled ultra-low carbon steel sheets
Xin Li, Min Wang, Yan Ping Bao, Li Dong Xing and Jian Hua ChuIronmaking & Steelmaking 47 (4) 437 (2020)
https://doi.org/10.1080/03019233.2018.1540520
Effect of composition and morphology of non-metallic inclusions on fracture toughness in as-cast AHSS
Zhanfang Wu, Zhenyu Liu, Shengtao Qiu and Xiangyang LiMetallurgical Research & Technology 116 (6) 623 (2019)
https://doi.org/10.1051/metal/2019052
Characteristic Transformation of Manganese-containing Inclusions during Al-killed Process in Ultra-low Carbon Interstitial-free Steel
Min Wang, Yan-ping Bao and Li-dong XingISIJ International 58 (5) 886 (2018)
https://doi.org/10.2355/isijinternational.ISIJINT-2017-682