Effect of proeutectoid carbide on heredity in microstructure-mechanical properties and fatigue life of GCr15 bearing steel
Metall. Res. Technol., 114 2 (2017) 208
Published online: 2017-04-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Precipitation, Growth, and Aggregation Behavior of Primary Carbides during Continuous Casting of 6Cr13 Slabs
Shouhui Li, Jing Li, Jixiang Pan, Haixia Wei, Wei Yan, Shuang Zhu, Zhaoguo Li and Bin Xusteel research international 95 (4) (2024)
https://doi.org/10.1002/srin.202300524
Effect of Rare Earth Y on Microstructure and Mechanical Properties of High-Carbon Chromium Bearing Steel
Wenwen Xu, Luhua Liu, Qing Yang, Wei Zhou, Diqiang Luo, Cunchang Jiang, Binbing Yin and Chaobin LaiMetals 14 (4) 372 (2024)
https://doi.org/10.3390/met14040372
The Effect of N Content on the Microstructure and Wear Resistance of Improved High-Carbon Chromium Bearing Steel
Jincheng Liao, Jiamin Song and Yitao YangInternational Journal of Metalcasting (2024)
https://doi.org/10.1007/s40962-024-01443-0
Study on mechanical properties of rare earth elements modified high carbon chromium bearing steel
Qiancheng Zhao, Hong Luo, Zhimin Pan, Xuefei Wang and Hongxu ChengMaterials Today Communications 34 105329 (2023)
https://doi.org/10.1016/j.mtcomm.2023.105329
Influences of Cooling Rate on Solidification Microstructure and Carbide of GCr15 Bearing Steel
Weiling Wang, Tengfei Luo, Zonghui Liu, Sen Luo and Miaoyong ZhuMetallurgical and Materials Transactions B 54 (2) 776 (2023)
https://doi.org/10.1007/s11663-023-02725-4
Effect of a modified quenching on impact toughness of 52100 bearing steels
Yonghan Li, Zhonghua Jiang, Pei Wang, Dianzhong Li and Yiyi LiJournal of Materials Science & Technology 160 96 (2023)
https://doi.org/10.1016/j.jmst.2023.02.057
Realising carbide ultrafast homogenisation under pulsed electric current
Jianqiao Hao, Shuyang Qin, Longge Yan and Xinfang ZhangMaterials Science and Technology 38 (11) 689 (2022)
https://doi.org/10.1080/02670836.2022.2062816
Effect of Spheroidizing Annealing in Combination with Alternating Magnetic Field on Microstructure and Mechanical Properties of GCr15 Bearing Steel
Yongcheng Li, Chuanjun Li, Siyu Chen, et al.ISIJ International 62 (6) 1275 (2022)
https://doi.org/10.2355/isijinternational.ISIJINT-2021-596
Continuous Cooling Transformation Behavior of High Carbon Pearlitic Steel
Lu Lu Feng, Wei Wen Qiao, Jian Sun, et al.Key Engineering Materials 905 83 (2022)
https://doi.org/10.4028/www.scientific.net/KEM.905.83
Effect of Dynamic Soft Reduction Range and Amount on Central Segregation in Bloom and the Resulting Microstructure in the Rod of GCr15‐Bearing Steel
Cheng Yao, Min Wang, Mingfei Cheng, Lidong Xing, Ying Wang, Yubo Gao and Yanping Baosteel research international 93 (11) (2022)
https://doi.org/10.1002/srin.202200495
Numerical Simulation of Microstructure Evolution of Large GCr15 Bar during Multi-Pass Rough Rolling
Huaibin Han, Xianming Zhao, Haochen Ding, Chi Zhang, Xueqing Yu and Wei WangMetals 12 (5) 812 (2022)
https://doi.org/10.3390/met12050812
Effects of niobium on network carbide in high-carbon chromium bearing steel by in situ observation analysis
Huan Wang, Jian Li, Chaolei Zhang, Wenjun Wang and Yazheng LiuIronmaking & Steelmaking 48 (2) 155 (2021)
https://doi.org/10.1080/03019233.2020.1744339
Numerical and experimental investigation of solidification structure evolution and reduction of centre segregation in continuously cast GCr15 bloom
Hanghang An, Yanping Bao, Min Wang, Quan Yang and Yanyin DangIronmaking & Steelmaking 47 (9) 1063 (2020)
https://doi.org/10.1080/03019233.2019.1672447
Accelerated Carbon Atoms Diffusion in Bearing Steel Using Electropulsing to Reduce Spheroidization Processing Time and Improve Microstructure Uniformity
Jianqiao Hao, Hexiong Zhang, Xinfang Zhang and Chengbao Liusteel research international 91 (7) (2020)
https://doi.org/10.1002/srin.202000041
Improvement of centre segregation in continuous casting bloom and the resulting carbide homogeneity in bearing steel GCr15
Hanghang An, Yanping Bao, Min Wang, Quan Yang and Yongsheng HuangIronmaking & Steelmaking 46 (9) 896 (2019)
https://doi.org/10.1080/03019233.2019.1604614
Effect of Niobium on the Dry Sliding Friction and Wear Properties of 100Cr6 Bearing Steel
He Guo-Ning, Zhou Ning-Bo, Zhang Chao-lei, Ba Xin-yu and Liu Ya-ZhengJournal of Tribology 140 (6) (2018)
https://doi.org/10.1115/1.4040304