A comprehensive review on cold work of AISI D2 tool steel
Metall. Res. Technol., 115 1 (2018) 104
Published online: 2017-11-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Modelling and analysis of nanosecond laser polishing for skd11 steel with surface roughness prediction and optimization
Van-Van Le, Hai-Duong Nguyen, Thanh-Tung Vu, Nguyen-Hung Tran, Thai-Tat-Hoan Nguyen, Van-Thuc Tran and Quang-Hung TrinhThe International Journal of Advanced Manufacturing Technology 138 (7-8) 3517 (2025)
https://doi.org/10.1007/s00170-025-15747-w
Laser Surface Treatment Optimization of 1.2379 (AISI D2) Tool Steel
Sayit Ozbey and Hatice Secil ArtemLasers in Manufacturing and Materials Processing (2025)
https://doi.org/10.1007/s40516-025-00297-6
Dislocation cell-mediated nanosized carbide precipitation enables ultrastrong AISI D2 tool steel fabricated via laser-powder bed fusion
Heechan Jung, Haeum Park, Seungjin Nam, Chahee Jung, Hahun Lee, Sang Guk Jeong, Ji-Su Lee, Jeong Min Park, Alireza Zargaran, Byeong-Joo Lee, Hyoung Seop Kim and Seok Su SohnMaterials Science and Engineering: A 942 148735 (2025)
https://doi.org/10.1016/j.msea.2025.148735
Enhancing Quality Control: Image-Based Quantification of Carbides and Defect Remediation in Binder Jetting Additive Manufacturing
Amit Choudhari, James Elder, Manoj Mugale, Sanoj Karki, Satyavan Digole, Stephen Omeike and Tushar BorkarMaterials 17 (10) 2174 (2024)
https://doi.org/10.3390/ma17102174
Microstructure, hardness, and tribological performance of D2 tool steel fabricated by laser cladding using pulsed wave and substrate heating
Christian Félix-Martínez, Luis Daniel García-Salas, Juan Manuel González-Carmona, Haideé Ruiz-Luna, Ángel Iván García-Moreno and Juan Manuel Alvarado-OrozcoOptics & Laser Technology 175 110862 (2024)
https://doi.org/10.1016/j.optlastec.2024.110862
Effectiveness of using liquid nitrogen cryogen in grinding to enhance the grinding performance of hard steel
Ashwani Sharma, Abhimanyu Chaudhari, Mohd Zaheer Khan Yusufzai and Meghanshu VashistaProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 238 (1-2) 315 (2024)
https://doi.org/10.1177/09544054221147622
An Experimental Study on Improving Grindability with LN2 Coolant for Grinding AISI D2 Tool Steel
Ashwani Sharma, Abhimanyu Chaudhari, Mohd Zaheer Khan Yusufzai and Meghanshu VashistaJournal of Materials Engineering and Performance 33 (1) 64 (2024)
https://doi.org/10.1007/s11665-023-07958-7
Characterization and Modeling of Wear Behavior of AISI D3 Tool Steel under Dry Sliding Conditions
Faruk ÇavdarJournal of Materials Engineering and Performance 33 (16) 8354 (2024)
https://doi.org/10.1007/s11665-023-08537-6
Surface roughness prediction of AISI D2 tool steel during powder mixed EDM using supervised machine learning
Amreeta R. Kaigude, Nitin K. Khedkar, Vijaykumar S. Jatti, Sachin Salunkhe, Robert Cep and Emad Abouel NasrScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-60543-3
Residual stress variations in substrate (AISI D2) during directed energy deposition process of high-speed tool steel (AISI M4) powder
Su Seong Woo, Ki Yong Lee, Gyeong Yun Baek and Jae Woong KimJournal of Alloys and Metallurgical Systems 6 100080 (2024)
https://doi.org/10.1016/j.jalmes.2024.100080
Evaluation of the deposition mass, thickness and micro-hardness of TiN layer applied on AISI D2 tool steel by electrophoretic deposition
Vahid Pouyafar, Ali Babaei, Ramin Meshkabadi and Samad TaghizadehSādhanā 49 (4) (2024)
https://doi.org/10.1007/s12046-024-02610-z
Impact of Heat Treatment Conditions and Cold Plastic Deformation on Secondary Hardening and Performance of Cold Work Tool Steel X160CrMoV12
Regita Bendikiene and Lina KavaliauskieneMetals 14 (10) 1121 (2024)
https://doi.org/10.3390/met14101121
Friction stir processing of M2 and D2 tool steels for improving hardness, wear and corrosion resistances
Quan Liu, Xiaomi Chen, Kun Liu, Valentino A.M. Cristino, Kin Ho Lo, Zhengchao Xie and Chi Tat KwokSurface and Coatings Technology 481 130609 (2024)
https://doi.org/10.1016/j.surfcoat.2024.130609
Analysis of Wear Mechanisms Under Cutting Parameters: Influence of Double Layer TiAlN/TiN PVD and TiCN/Al2O3 Chemical Vapor Deposition-Coated Tools on Milling of AISI D2 Steel
Gustavo M. Minquiz, N. E. González-Sierra, Javier Flores Méndez, Ana C. Piñón Reyes, Mario Moreno Moreno, Alfredo Morales-Sánchez, José Alberto Luna López, Zaira Jocelyn Hernandez-Simon and Claudia Denicia CarralCoatings 14 (12) 1491 (2024)
https://doi.org/10.3390/coatings14121491
Effects of Al, Ti, and Cr content with different interlayer configurations on tribological behavior of AlCrN and AlTiN multilayer coatings
Mustafa Alper Yilmaz, Özkan Doğuş, Cenk Türküz, Cihan Erdem and Bedri Onur KucukyildirimProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237 (4) 791 (2023)
https://doi.org/10.1177/14644207221124588
A retrospection of the effect of nitriding processes on the AISI H13 tool steel
Asaf Hanief Kohli, M Hanief and Vishal JagotaAdvances in Materials and Processing Technologies 9 (2) 425 (2023)
https://doi.org/10.1080/2374068X.2022.2093012
Segregation and carbide evolution in AISI D2 tool steel produced by curved continuous casting
Tinghui Man, Yuheng Dai, Jian Yao, Leqian Xu, Peng Li, Ming Zhao, Yu Liu and Hongshan ZhaoJournal of Materials Research and Technology 26 8254 (2023)
https://doi.org/10.1016/j.jmrt.2023.09.082
The grindability performance and measurement of surface functional parameter capabilities of difficult-to-machine tool steel under tangential ultrasonic-vibration-assisted dry grinding
Abhimanyu Chaudhari, Ashwani Sharma, Mohd Zaheer Khan Yusufzai and Meghanshu VashistaMachining Science and Technology 27 (3) 268 (2023)
https://doi.org/10.1080/10910344.2023.2224856
Experimental Analyses into Dry Ultrasonic Vibration-Assisted Grinding of Difficult-to-Machine Tool Steel with Alumina Wheel
Abhimanyu Chaudhari, Ashwani Sharma, Mohd Zaheer Khan Yusufzai and Meghanshu VashistaJournal of Materials Engineering and Performance 32 (11) 4860 (2023)
https://doi.org/10.1007/s11665-022-07444-6
Characterization and Kinetics of Chromium Carbide Coatings on AISI O2 Tool Steel Performed by Pack Cementation
M. A. Elhelaly, M. A. El-Zomor, M. S. Attia and A. O. YoussefJournal of Materials Engineering and Performance 31 (1) 365 (2022)
https://doi.org/10.1007/s11665-021-06211-3
Study on microstructure, phase transformation behavior of T15 high-speed steel and the effect of adding REEs
Bo Zhao, Min Xia and Chang-Chun GeMetallurgical Research & Technology 119 (5) 525 (2022)
https://doi.org/10.1051/metal/2022082
The influence of DED process parameters and heat-treatment cycle on the microstructure and hardness of AISI D2 tool steel
S.M.T. Omar and K.P. PlucknettJournal of Manufacturing Processes 81 655 (2022)
https://doi.org/10.1016/j.jmapro.2022.06.069
Decision making on the machining parameters of Electrical Discharge Machined AISI D2 tool steel by AHP and PROMETHEE method
Rakesh Kumar Patel and Mohan Kumar PradhanIOP Conference Series: Materials Science and Engineering 1104 (1) 012011 (2021)
https://doi.org/10.1088/1757-899X/1104/1/012011
The effects of temperature and strain rate on the hot deformation behavior of AISI H10 tool steel
Maryam Kamali Ardakani and Maryam MorakabatiMetallurgical Research & Technology 118 (1) 107 (2021)
https://doi.org/10.1051/metal/2020082
Sleipner Soğuk İş Takım Çeliğinin Elektro-Erozyon Tezgahında Bakır Krom Zirkonyum Alaşımı Elektrot ile İşlenmesinde İşleme Parametrelerinin Kerf ve Yüzey Pürüzlülüğü Üzerine Etkisinin İncelenmesi
Ferhat CERİTBİNMEZ and Ahmet YAPICIKaradeniz Fen Bilimleri Dergisi 11 (2) 570 (2021)
https://doi.org/10.31466/kfbd.948444
Recent Advances in Mechanical Infrastructure
Soni Kumari, Din Bandhu, Anshuman Kumar, Rajiv Kumar Yadav and K. VivekanandaLecture Notes in Intelligent Transportation and Infrastructure, Recent Advances in Mechanical Infrastructure 49 (2020)
https://doi.org/10.1007/978-981-32-9971-9_6
Effect of carbon content on microstructural evolution of 8Cr steel in austenitizing process
Junjia Zhang, Yue Liu, Hao Guo, et al.Materials Science and Engineering: A 796 140026 (2020)
https://doi.org/10.1016/j.msea.2020.140026
Materials Processing Fundamentals 2019
Shaoying Li, Hanjie Guo, Mingtao Mao and Xiao ShiThe Minerals, Metals & Materials Series, Materials Processing Fundamentals 2019 97 (2019)
https://doi.org/10.1007/978-3-030-05728-2_9
Carbide Precipitation during Tempering and Its Effect on the Wear Loss of a High-Carbon 8 Mass% Cr Tool Steel
Shaoying Li, Xiaojun Xi, Yiwa Luo, Mingtao Mao, Xiao Shi, Jing Guo and Hanjie GuoMaterials 11 (12) 2491 (2018)
https://doi.org/10.3390/ma11122491