Effects of electromagnetic stirring on fluid flow and temperature distribution in billet continuous casting mould and solidification structure of 55SiCr
Metall. Res. Technol., 115 1 (2018) 103
Published online: 2017-11-17
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
The Influence of Process and Slag Parameters on the Liquid Slag Layer in Continuous Casting Mold for Large Billets
Zhijun Ding, Chao Wang, Xin Wang, Pengcheng Xiao, Liguang Zhu and Shuhuan WangCrystals 15 (5) 388 (2025)
https://doi.org/10.3390/cryst15050388
Two-stream neural network for the prediction of multiple defects in continuous casting
Xinyu Ning, Haijun Li, Qibo Wang, Fei Yang, Yanfeng Zhang and Guodong WangApplied Soft Computing 175 113116 (2025)
https://doi.org/10.1016/j.asoc.2025.113116
Effect of Swirling Flow Submerged Entry Nozzle on Solidification and Macrosegregation Behavior of a Round Bloom with Mold and Final Electromagnetic Stirring
Qinghua Xie, Peiyuan Ni, Mikael Ersson, Qilin Liu and Ying LiMetallurgical and Materials Transactions B 56 (1) 154 (2025)
https://doi.org/10.1007/s11663-024-03342-5
Investigation on the effect of reduction process on internal quality of high carbon steel billet and its evolution in as-rolled wire rod
Yubo Gao, Yanping Bao, Min Wang, Haibo Zhang and Ying WangMetallurgical Research & Technology 121 (5) 506 (2024)
https://doi.org/10.1051/metal/2024058
A Study on Solidification Behavior of a Large Round Bloom Affected by Swirling Flow Submerged Entry Nozzle Combined with Mold Electromagnetic Stirring
Qinghua Xie, Peiyuan Ni, Mikael Ersson and Ying LiMetallurgical and Materials Transactions B 55 (4) 2049 (2024)
https://doi.org/10.1007/s11663-024-03132-z
The Effect of Steel Grade Casting Sequence on the Length of Transition Bloom
Sicheng Song, Yanhui Sun, Wenhao Zhou, Jian Yang and Wenzhi YangMetallurgical and Materials Transactions B 55 (3) 1795 (2024)
https://doi.org/10.1007/s11663-024-03067-5
Numerical and Experimental Study on Carbon Segregation in Square Billet Continuous Casting with M-EMS
Pengchao Li, Guifang Zhang, Peng Yan, Peipei Zhang, Nan Tian and Zhenhua FengMaterials 16 (16) 5531 (2023)
https://doi.org/10.3390/ma16165531
Effect of magnetic alternate stirring on solidification structure of the round billet
Mengyun Zhang, Yanping Bao, Lihua Zhao and Haibo ZhangIronmaking & Steelmaking 50 (11) 1737 (2023)
https://doi.org/10.1080/03019233.2023.2246298
Effect of the current intensity and positions of mold electromagnetic stirring on the macrosegregation in the full-length curved continuous casting bloom
Yadong Wang and Lifeng ZhangMetallurgical Research & Technology 120 (5) 502 (2023)
https://doi.org/10.1051/metal/2023062
Study on the positive segregation in columnar-to-equiaxed transition zone
Yadong Wang and Lifeng ZhangMetallurgical Research & Technology 120 (1) 104 (2023)
https://doi.org/10.1051/metal/2022108
Study on the metallurgical function of mold electromagnetic stirring in continuous casting bloom
Yadong Wang, Wei Chen and Lifeng ZhangMetallurgical Research & Technology 120 (5) 505 (2023)
https://doi.org/10.1051/metal/2023061
Effect of Magnet Alternate Stirring on the Internal Quality of Sn-Pb Alloy
Mengyun Zhang, Yanping Bao and Haibo ZhangMetals 13 (10) 1732 (2023)
https://doi.org/10.3390/met13101732
Solidification Principle in Large Vertical Steel Casting Under the EMS Effect
Zhao Zhang, Menghuai Wu, Haijie Zhang, Susanne Hahn, Franz Wimmer, Andreas Ludwig and Abdellah KharichaMetallurgical and Materials Transactions B 54 (4) 1870 (2023)
https://doi.org/10.1007/s11663-023-02801-9
Effect of nozzle type on fluid flow, solidification, and solute transport in mold with mold electromagnetic stirring
Ya-dong Wang, Li-feng Zhang, Wen Yang and Ying RenJournal of Iron and Steel Research International 29 (2) 237 (2022)
https://doi.org/10.1007/s42243-021-00577-3
The Role of Mold Electromagnetic Stirring in the Dissipation of Superheat during the Continuous Casting of Billets
Zhao Zhang, Menghuai Wu, Haijie Zhang, Andreas Ludwig and Abdellah Kharichasteel research international 93 (12) (2022)
https://doi.org/10.1002/srin.202200065
Experimental Evaluation of MHD Modeling of EMS During Continuous Casting
Haijie Zhang, Menghuai Wu, Zhao Zhang, et al.Metallurgical and Materials Transactions B 53 (4) 2166 (2022)
https://doi.org/10.1007/s11663-022-02516-3
Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS
Zhao Zhang, Menghuai Wu, Haijie Zhang, et al.Journal of Materials Processing Technology 301 117434 (2022)
https://doi.org/10.1016/j.jmatprotec.2021.117434
Numerical simulation of macrosegregation in billet continuous casting influenced by electromagnetic stirring
Qi-peng Dong, Jiong-ming Zhang, Yan-bin Yin and Hiromi NagaumiJournal of Iron and Steel Research International 29 (4) 612 (2022)
https://doi.org/10.1007/s42243-021-00682-3
Enhancing isotope mixing in U-10Mo downblend castings with electromagnetic stirring
Zachary Huber, Matthew Athon, Steve Shen, et al.Journal of Nuclear Materials 555 153148 (2021)
https://doi.org/10.1016/j.jnucmat.2021.153148
Effect of Mold Electromagnetic Stirring and Final Electromagnetic Stirring on the Solidification Structure and Macrosegregation in Bloom Continuous Casting
Yadong Wang, Lifeng Zhang, Wen Yang, Sha Ji and Ying Rensteel research international 92 (5) (2021)
https://doi.org/10.1002/srin.202000661
Effect of the Gap Between Copper Mold and Solidified Shell on the Fluid Flow in the Continuous Casting Strand with Mold Electromagnetic Stirring
Yadong Wang, Wei Chen, Dongbin Jiang and Lifeng Zhangsteel research international 91 (2) (2020)
https://doi.org/10.1002/srin.201900470
Effect of Nozzle Clogging on the Fluid Flow Pattern in a Billet Mold with Particle Image Velocimetry Technology
Chengjian Hua, Min Wang and Yanping BaoMetallurgical and Materials Transactions B 51 (6) 2871 (2020)
https://doi.org/10.1007/s11663-020-01996-5
A Simulation and Optimization Study of the Swirling Nozzle for Eccentric Flow Fields of Round Molds
Peng Lin, Yan Jin, Fu Yang, Ziyu Liu, Rundong Jing, Yang Cao, Yuyang Xiang, Changgui Cheng and Yang LiMetals 10 (5) 691 (2020)
https://doi.org/10.3390/met10050691
Materials Processing Fundamentals 2020
Yadong Wang, Dongbin Jiang, Sha Ji and Lifeng ZhangThe Minerals, Metals & Materials Series, Materials Processing Fundamentals 2020 13 (2020)
https://doi.org/10.1007/978-3-030-36556-1_2
Numerical and experimental investigation of solidification structure evolution and reduction of centre segregation in continuously cast GCr15 bloom
Hanghang An, Yanping Bao, Min Wang, Quan Yang and Yanyin DangIronmaking & Steelmaking 47 (9) 1063 (2020)
https://doi.org/10.1080/03019233.2019.1672447
Materials Processing Fundamentals 2020
Hanghang An, Yanping Bao, Min Wang and Quan YangThe Minerals, Metals & Materials Series, Materials Processing Fundamentals 2020 205 (2020)
https://doi.org/10.1007/978-3-030-36556-1_18
Model prediction of the effect of in-mold electromagnetic stirring on negative segregation under bloom surface
Yu-kun Huo, Li-hua Zhao, Hang-hang An, Min Wang and Chang-dong ZouInternational Journal of Minerals, Metallurgy and Materials 27 (3) 319 (2020)
https://doi.org/10.1007/s12613-019-1906-6
A Mathematical Model on Macro-Segregation Formation for Popular Bloom Continuous Casting Process
Hai Bo Sun, Zheng Li, Lie Jun Li and Bao Hua NieMaterials Science Forum 944 770 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.944.770
Effect of subsurface negative segregation induced by M-EMS on componential homogeneity for bloom continuous casting
Haibo Sun, Liejun Li, Xuexing Wu and Chengbin LiuMetallurgical Research & Technology 115 (6) 603 (2018)
https://doi.org/10.1051/metal/2018031