Exhibition of veiled features in diffusion bonding of titanium alloy and stainless steel via copper
Metall. Res. Technol., 115 1 (2018) 115
Published online: 2017-11-27
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
(2024)
https://doi.org/10.2139/ssrn.4772845
Effect of annealing temperature on interfacial microstructure and tensile fracture behavior of titanium-steel clad plate
Guanghui Zhao, Qingyao Tang, Qingcheng Guo, Juan Li, Lifeng Ma and Lianwei MaMaterials Characterization 215 114128 (2024)
https://doi.org/10.1016/j.matchar.2024.114128
253 133 (2024)
https://doi.org/10.1007/978-3-031-67519-5_11
Electrochemical behavior and microstructure of diffusion welding of zirconium alloy and super duplex stainless steel
Avinash Kumar, Gopinath Thirunavukarasu and Sukumar KunduMaterials Today Communications 41 110735 (2024)
https://doi.org/10.1016/j.mtcomm.2024.110735
Influence of Diffusion Bonding Pressure on Microstructural Features and Strength Performance of Dissimilar Ti–6Al–4V Alloy and AISI 304 Steel Joints Developed Using Copper Interlayer
A. Arun Negemiya, Selvarajan Rajakumar, Tushar Sonar and Mikhail IvanovJournal of Engineering Materials and Technology 145 (4) (2023)
https://doi.org/10.1115/1.4062443
Diffusion Welding of Ti6Al4V and 17-4 Stainless Steel Using Cu/Ni Microlayers
Sukumar Kundu and Gopinath ThirunavukarasuJournal of Materials Engineering and Performance 32 (2) 735 (2023)
https://doi.org/10.1007/s11665-022-07101-y
Comprehensive Study of the Influence of the Bonding Temperature and Contact Pressure Regimes during Diffusion Bonding on the Deformation and Mechanical Properties of AISI 304
Thomas Gietzelt, Mario Walter, Volker Toth, Florian Messerschmidt and Melina BlemAdvanced Engineering Materials 23 (8) (2021)
https://doi.org/10.1002/adem.202100188
Comprehensive Study of the Deformation Behavior during Diffusion Bonding of 1.4301 (AISI 304) as a Function of Material Width and Aspect Ratio
Thomas Gietzelt, Volker Toth, Manfred Kraut, Uta Gerhards and Robin DürrschnabelMetals 10 (9) 1116 (2020)
https://doi.org/10.3390/met10091116
Diffusion Bonding and Transient Liquid Phase (TLP) Bonding of Type 304 and 316 Austenitic Stainless Steel—A Review of Similar and Dissimilar Material Joints
Abdulaziz AlHazaa and Nils HaneklausMetals 10 (5) 613 (2020)
https://doi.org/10.3390/met10050613
Analytical Investigation on the Evolution and Growth of β-Ti and Fe-Nb-Based Intermetallics in Diffusion Coupled Joints of Ti6Al4V|Nb|SS
Gopinath Thirunavukarasu, Sukumar Kundu, Vivek V. Patel and Alankar AlankarDiffusion Foundations 27 3 (2020)
https://doi.org/10.4028/www.scientific.net/DF.27.3
Diffusion bonding of a titanium alloy to austenitic stainless steel using copper as an interlayer
A. Arun Negemiya, S. Rajakumar and V. BalasubramanianSN Applied Sciences 1 (9) (2019)
https://doi.org/10.1007/s42452-019-1189-6
Vacuum diffusion bonding TC4 to Ni80Cr20: Interfacial microstructure, segregation, cracking and properties
Kun Liu, Yajiang Li and Juan WangVacuum 158 218 (2018)
https://doi.org/10.1016/j.vacuum.2018.10.001