Micro friction stir lap welding of AISI 430 ferritic stainless steel: a study on the mechanical properties, microstructure, texture and magnetic properties
Metall. Res. Technol., 115 3 (2018) 307
Published online: 2018-04-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
On the Microstructural Transformations and Mechanical Performance of Laser Beam Welded UNS S43000 Ferritic Stainless Steel
Farzad Badkoobeh, Hossein Mostaan and Ali SonboliJournal of Materials Engineering and Performance 34 (3) 2358 (2025)
https://doi.org/10.1007/s11665-024-09250-8
A Study on Phase Evolutions and Tensile-Shear Performance of Dissimilar Resistance Spot Welds Formed Between AISI 430 Ferritic Stainless Steel and AISI 321 Austenitic Stainless Steel
Farzad Badkoobeh, Hossein Mostaan, Mahdi Rafiei and Ali BakhtiariJournal of Materials Engineering and Performance 32 (11) 5028 (2023)
https://doi.org/10.1007/s11665-022-07451-7
PTA-Welded Coatings with Saturation Magnetization above 1.3 T Using FeCrBSi Powders with Chemical Composition Similar to AISI 430 Ferrite Stainless Steel
Yingqing Fu, Haiming Wang, Wenhao Huang, et al.Magnetochemistry 9 (4) 93 (2023)
https://doi.org/10.3390/magnetochemistry9040093
Microstructure evolution and its effect on the stress rupture behavior of 9%Cr-CrMoV dissimilar welded joint
Kai Ding, Manjie Fan, Yi He, Xin Huo, Xia Liu, Tao Wei, Guanzhi Wu and Yulai GaoEngineering Failure Analysis 146 107071 (2023)
https://doi.org/10.1016/j.engfailanal.2023.107071
Microstructural Analysis and Mechanical Behaviour of Copper CDA 101/AISI-SAE 1010 Dissimilar Metal Welds Processed by Friction Stir Welding
K. Giridharan, P. Sevvel, B. Stalin, M. Ravichandran and P. SureshkumarMaterials Research 25 (2022)
https://doi.org/10.1590/1980-5373-mr-2021-0430
Effects of joint heat distribution on material flow and microstructure in continuous drive friction welding of 45 # steel
Weichao Zhang, Yongfang Deng, Pengfei Zhan, Jincheng Zeng, Shun Xiao and Xiangpeng XiaoProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236 (12) 6635 (2022)
https://doi.org/10.1177/09544062211065984
Experimental investigation on friction stir welding of dissimilar aluminium alloys
Shubham Verma and Joy P MisraProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235 (5) 1545 (2021)
https://doi.org/10.1177/09544089211008694
Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding, friction stir vibration welding and tungsten inert gas welding: A comparative study
Behrouz Bagheri, Mahmoud Abbasi and Amin AbdollahzadehInternational Journal of Minerals, Metallurgy and Materials 28 (3) 450 (2021)
https://doi.org/10.1007/s12613-020-2085-1
Aging-induced formation of the nano-sized clustered carbides in the weld metal of Co-based alloy/AISI 410 stainless steel dissimilar welded joint
Yuanheng Zhang, Kai Ding, Guanzhi Wu, et al.Metallurgical Research & Technology 117 (4) 402 (2020)
https://doi.org/10.1051/metal/2020033