Experimental study of the effects of wire EDM on the characteristics of ferritic steel, at a micro-scale on the contour cut surface
Metall. Res. Technol., 115 4 (2018) 413
Published online: 2018-08-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Optimization of Qualitative Indicators of the Machined Surface in Symmetrical Machining of TS by WEDM Technology
Ľuboslav StrakaSymmetry 17 (2) 229 (2025)
https://doi.org/10.3390/sym17020229
Prognostics, Health Assessment, and Modelling of Material Removal Rate by EDM for Al 6061 and AISI 304 via Cockroach Swarm and Fruit Fly Optimization Approaches
Senthil Kumaran Selvaraj, Jayakumar Kaliappan, Natarajan Muthuswamy, et al.Advances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/2226653
Residual stress investigation of quenched and artificially aged aluminum alloy 7175
Kadiata Ba, Julie Levesque, Augustin Gakwaya and Sasan Sattarpanah KarganroudiThe International Journal of Advanced Manufacturing Technology 116 (5-6) 1537 (2021)
https://doi.org/10.1007/s00170-021-07520-6
EFFECT OF WIRE ELECTRICAL DISCHARGE MACHINING ON THE SURFACE OF EBM-ADDITIVE MANUFACTURED NITI ALLOYS
Gozde Sultan ALTUG PEDUK, Savaş DİLİBAL and Uğur GÜROLInternational Journal of 3D Printing Technologies and Digital Industry 5 (3) 606 (2021)
https://doi.org/10.46519/ij3dptdi.962015
Application of Activated Clay for Improvement of Water Quality in Wire Electric Discharge Machining
Eri Nagahashi, Fumihiko Ogata, Takehiro Nakamura and Naohito KawasakiBPB Reports 2 (6) 119 (2019)
https://doi.org/10.1248/bpbreports.2.6_119