Formation and stabilization of reverted austenite in supermartensitic stainless steel
Metall. Res. Technol., 115 4 (2018) 402
Published online: 2018-08-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
In situ characterization of phase and microstructural evolution during multi-step heat treatment of an additively manufactured tool steel
Nicole Ofner, Michael Meindlhumer, Peter Kunnas, Atacan Asci, Marek Gocnik, Andreas Stark, Philipp Höbenreich, Christin Aumayr, Liang Wu, Christoph Turk, Jozef Keckes and Sabine Carmen BodnerJournal of Materials Research and Technology 37 2528 (2025)
https://doi.org/10.1016/j.jmrt.2025.06.115
In situ evaluation of sensitization in the heat affected zone of supermartensitic stainless steel welded with superduplex filler metal
A.B. Furtado, M.T.G. de Sampaio, A.R. Pimenta, E.A. Ponzio and S.S.M. TavaresEngineering Failure Analysis 166 108894 (2024)
https://doi.org/10.1016/j.engfailanal.2024.108894
Effects of post-weld heat treatments in microstructure, mechanical properties, and corrosion resistance of simulated heat-affected zone of supermartensitic steel UNS S41426
André Rocha Pimenta, Ilson Palmieri Baptista, Israel Miguel da Silva Breves, Juan Manuel Pardal and Sérgio Souto Maior TavaresThe International Journal of Advanced Manufacturing Technology 132 (3-4) 1915 (2024)
https://doi.org/10.1007/s00170-024-13448-4
Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel
Andreas Rosenauer, Sebastian Teusl, Andreas Landefeld, Dominik Brandl, Gerald Ressel, Thomas Hönigmann, Manfred Stadler, Christoph Turk, Emad Maawad, Martin Stockinger and Ronald SchnitzerMaterials Science and Engineering: A 895 146220 (2024)
https://doi.org/10.1016/j.msea.2024.146220
Insight on microstructure and mechanical properties of 40 mm thick-walled ferromagnetic super-MSS by magnetic-field-assisted narrow gap GTAW
Fuxiang Li, Yibo Liu, Haoyu Kong, Huisheng Ren, Yujie Tao, Qinghua Zhang and Qingjie SunJournal of Materials Research and Technology 24 5805 (2023)
https://doi.org/10.1016/j.jmrt.2023.04.117
In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13‐8 Mo Maraging Steel
Andreas Rosenauer, Dominik Brandl, Gerald Ressel, Sarah Lukas, Christian Gruber, Martin Stockinger and Ronald SchnitzerAdvanced Engineering Materials 25 (12) (2023)
https://doi.org/10.1002/adem.202300410
Effect of Intercritical Annealing on the Microstructure and Mechanical Properties of 0.1C-13Cr-3Ni Martensitic Stainless Steel
Jaka Burja, Blaž Šuler, Marko Češnjaj and Aleš NagodeMetals 11 (3) 392 (2021)
https://doi.org/10.3390/met11030392
Multiscale in-situ studies of strain-induced martensite formation in inter-critically annealed extra-low-carbon martensitic stainless steel
Frank Niessen, Azdiar A. Gazder, John Hald and Marcel A.J. SomersActa Materialia 220 117339 (2021)
https://doi.org/10.1016/j.actamat.2021.117339